by
MichielCornelissen
Don’t let unruly wires get between you and your music. Pod à porter is the easiest way to wear your music, and it’s now available for the iPod shuffle 4th generation.
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
by
curiousgoods
I suggest the gold-plated glossy material. The pitting and smoothing of the model that occurs when the plating is applied makes the key look old and worn. It's fantastic.
---
Billina showed her the place where she had "stubbed her bill," as she expressed it, and Dorothy dug away the sand until she felt something hard. Then, thrusting in her hand, she pulled the thing out, and discovered it to be a large sized golden key--rather old, but still bright and of perfect shape.
"What did I tell you?" cried the hen, with a cackle of triumph. "Can I tell metal when I bump into it, or is the thing a rock?"
"It's metal, sure enough," answered the child, gazing thoughtfully at the curious thing she had found. "I think it is pure gold, and it must have lain hidden in the sand for a long time. How do you suppose it came there, Billina? And what do you suppose this mysterious key unlocks?"
From Ozma of Oz by L. Frank Baum
Full text available at http://www.gutenberg.org/etext/486
[Emerald not included.]
---
Billina showed her the place where she had "stubbed her bill," as she expressed it, and Dorothy dug away the sand until she felt something hard. Then, thrusting in her hand, she pulled the thing out, and discovered it to be a large sized golden key--rather old, but still bright and of perfect shape.
"What did I tell you?" cried the hen, with a cackle of triumph. "Can I tell metal when I bump into it, or is the thing a rock?"
"It's metal, sure enough," answered the child, gazing thoughtfully at the curious thing she had found. "I think it is pure gold, and it must have lain hidden in the sand for a long time. How do you suppose it came there, Billina? And what do you suppose this mysterious key unlocks?"
From Ozma of Oz by L. Frank Baum
Full text available at http://www.gutenberg.org/etext/486
[Emerald not included.]
by
MichaelMueller
A ssssnake... well, to be honest, not my favorite type of animal...
but a little, clever snake-pet would be nice...
living winded around a finger of my hand...
eating annoying mosquitoes and biting bad people!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
The default Ring Size is US 6.5.
Use one of the following links to choose another ring size.
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 7.5
Inside Diameter: 17.73 mm / 0.698 in
Inside circumference: 55.70 mm / 2.19 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
US Ring Size 15
Inside Diameter: 23.83 mm / 0.938 in
Inside circumference: 74.80 mm / 2.95 in
Other size needed? Just send me a message!
but a little, clever snake-pet would be nice...
living winded around a finger of my hand...
eating annoying mosquitoes and biting bad people!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
The default Ring Size is US 6.5.
Use one of the following links to choose another ring size.
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 7.5
Inside Diameter: 17.73 mm / 0.698 in
Inside circumference: 55.70 mm / 2.19 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
US Ring Size 15
Inside Diameter: 23.83 mm / 0.938 in
Inside circumference: 74.80 mm / 2.95 in
Other size needed? Just send me a message!
by
snymat68
Easy opening of ketchup packets, salad dressing packets, etc.
Simply slide a standard x-acto blade into the slot and clip a thin keyring through the hole.
Slide the corner of the packet through the slot and there you have it!
Simply slide a standard x-acto blade into the slot and clip a thin keyring through the hole.
Slide the corner of the packet through the slot and there you have it!
by
ChrisArtscapes
For some reason shapeways had trouble printing so I increased the size. so it should work now.
by
Magic
The Marble Cage is a cage to turn a 7/8" marble into a keychain.
The cage is to be closed with a keyring.
Unfortunately, due to moving parts, this model cannot be printed in Metal anymore.
Read this post for more information
A new version is also available.
Marble, keyring or necklace not included.
The cage is to be closed with a keyring.
Unfortunately, due to moving parts, this model cannot be printed in Metal anymore.
Read this post for more information
A new version is also available.
Marble, keyring or necklace not included.
by
MichaelMueller
This acorn is a whistle that can be used as a pendant.
In Norse mythology, the acorn is the symbol of life, fecundity and immortality ...
So, I'm pretty sure you'll feel healty, sexy and invincible with it, too!
In Norse mythology, the acorn is the symbol of life, fecundity and immortality ...
So, I'm pretty sure you'll feel healty, sexy and invincible with it, too!
by
ruzkin
5.2cm tall creeper keychain, hollow inside with a 1.3mm wall. Textured on all sides, with a 5mm loop to fit your key ring. Does not sneak up on you. Does not explode.
by
MichaelMueller
A while ago, I saw a guy clamping an old plastic bottle between the seat stays of his bike, to use it as a fender. It doesn't look very stable but it was a great idea anyway!
This 3d printed mount works with most plastic bottles, like Coke, Evian ect. You can just clip it on your bike - no glue or screws needed!
I've used a bottle which I've cut before. Technical, there is no need to halve it but it looks better this way and it's done easily.
This bottle-fender-mount works nice on old steel bike racing frames. The diameter of the tube should be about 29 mm (1.14 inch). Please check the pictures above to see if it's comparable to your bike.
Message me if you need it for another frame size.
This 3d printed mount works with most plastic bottles, like Coke, Evian ect. You can just clip it on your bike - no glue or screws needed!
I've used a bottle which I've cut before. Technical, there is no need to halve it but it looks better this way and it's done easily.
This bottle-fender-mount works nice on old steel bike racing frames. The diameter of the tube should be about 29 mm (1.14 inch). Please check the pictures above to see if it's comparable to your bike.
Message me if you need it for another frame size.
by
MichaelMueller
This whistle was inspired by the antique whistles made in england in the late 1800s.
If you want to know more about great whistlemakers like J. Hudson or T. Yates, check out one of this sites:
whistleshop.co.uk
whistlemuseum.com
If you want to know more about great whistlemakers like J. Hudson or T. Yates, check out one of this sites:
whistleshop.co.uk
whistlemuseum.com
by
MichaelMueller
I love my bike! It's based on an old racing cycle frame combined with a lot of nice and rare bicycle parts. I do not want it stolen, so I carry it every day, 100 steps down, 100 steps up. Sometimes living on the 4th floor is a real disadvantage.
Adding a carrying handle seems useful and in fact it is working very well!
This carrying handle works nice on old steel bike racing frames. The diameter of the down- and seat-tube is 29 mm (1.14 inch). Please message me if you need it for another frame size.
It comes without screws and bolt nuts! You need two 4 mm screws and bolt nuts. The screws should be 10-15 mm (0.39-0.59 inch) long.
Adding a carrying handle seems useful and in fact it is working very well!
This carrying handle works nice on old steel bike racing frames. The diameter of the down- and seat-tube is 29 mm (1.14 inch). Please message me if you need it for another frame size.
It comes without screws and bolt nuts! You need two 4 mm screws and bolt nuts. The screws should be 10-15 mm (0.39-0.59 inch) long.
