The best triply periodic minimal surface ever!

I put a bigger one here.

The third public evolution of the Animaris Geneticus Parvus. #7 has evolved legs, with pointy feet instead of flat. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros".
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!

The mechanism is printed assembled, and will work without further assembly right after birth from the printer.

A few tips to consider:

- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!

- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.

- The best way to push it is by its nameplate. Do not push down, but forward.

- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.

Nanolet

Everyone's wearing their Nano on their wrist nowadays, now you can wear it on a one part 3D printed nano bracelet.

The NANOLET simply wraps around your wrist and fits snugly up to your hand which is perfect for running and everyday use. An alternative to the plethora of nano watches that are around now.

Featured on: Mashable , Cult of Mac , Yanko Design and many more.

Suitable for medium sized wrists. Available in a range of colors

Medium is for a wrist of circumference 165mm - 185mm. The best way to measure your wrist is to wrap a piece of string around your wrist, mark it and then measure it. Maximum wrist size is 190mm.

Unboxing Video here

Click here for OTHER SIZES

Click here to visit our site

Or click here to keep up to date on Facebook

Interested in buying Nanolets in BULK at reduced price? For LARGE , MEDIUM and SMALL

 This 2in wide cuff is truly a bold accessory! It features a flexible C-shaped design that fits closely against the wrist. It was grown from 4 separate root points which gradually intertwined into a single network.

watch the video to see how it was created!

Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.

An espresso cup specially designed with fins, to ensure the successful deployment of your rocket fuel. All systems are go! Paraboloid bowl holds approximately 1.5 fl oz. or 45 mL. (Note that I previously claimed the cup held 60 mL. While my 3D modelling software still reports that as the internal volume, some combination of the printing process and glazing is robbing me of internal volume. Contact me if you'd be interested in a larger, more expensive 60 mL cup.)

After receiving feedback from Shapeways, I've created a slightly revised model for the cup. I'm told that this model will be easier to print and glaze, leading to a more reliable product. The changes are minor -- it's a little wider, a little heavier, and has more rounding on edges that were previously sharp (a 3D rendering shows the differences above).

Update (April 13th, 2013): The cup has had a great run on Shapeways, and I deeply appreciate the attention and positive feedback it has received. The bad news is that I've got to stop offering it for sale here. The good news is that the cup is now available commercially! It's being manufactured by Fred and Friends, sold under the name "Blast Off! Espresso Cup Set". It's already available for purchase online (perpetualkid.com, thinkgeek.com), and I'm sure you'll be able to find it in your favourite housewares store soon.

Sad Keanu comes in two sizes

Both are equally sad.

Teeny Keanu ($25) Little Keanu ($45)

---

Want to get both?

+

---

Cheer up, Little Keanu Reeves, it's ok. Just finish your sandwich and march on. Life is like a box of chocolate. Which pill will you choose? There is no spoon. You can't handle the truth! Wait. What was I doing again?

Since the response has been so great. I am raising funds on Kickstarter to offer a more refined product with nickel plating and milled from steel. Click here to support my Kickstarter

Even if you would like to order the 3D printed version here, please consider backing the Kickstarter to help me launch the product more affordably and with greater fidelity.

Have a new MacBook? Here's a little tool to help you keep a MagSafe adapter on you at all times :) And here is a link to the converter just in case, Apple Store MagSafe Converter

A theorem walks into a bar...
The Klein Bottle is a mathematical joke: a surface with only one side. This one feels just right in your hand and opens bottles with ease and style. Built to last in steel, it's the perfect touch for any math fan's kitchen.

Yes, it really works!

Klein not-a-bottle-opener is here.

Over The Top is a world-record 17x17x17 Rubik's Cube. It makes quite pretty patterns. It can take many, many hours to solve. The puzzle was first presented live to the world at  at the New York Puzzle Party Symposium, Saturday Feb. 12th. The YouTube video was be published after that event, and the record was accepted by Guinness World Records.

---

Buy this puzzle as a set by clicking below

+ + + + + + + + + + + + + + + + + + + + + + + + + +

---

The complete Over The Top 17x17x17 puzzle requires
-1x Set 1
-26 x Set 2
(Actually, you need only 24x Set 2, but it is strongly advised to order some spare parts.)

Watch the YouTube video.
Take a look inside the puzzle.
Read at the Shapeways Forum.
Read more at the Twisty Puzzles Forum.

Please contact Oskar directly if you are interested in obtaining a fully colored, stickered and assembled sample of this puzzle.

A fine network of vessels defines the surface of this crescent-shaped pendant which was inspired by how veins form in leaves. The densely interconnected structure is at once airy and strong.

It is a part of Hyphae, a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge.

Watch the video below to see the the form was created.

--
If you are interested in purchasing the necklace with the chain, please buy from our website
nylon plastic version: http://n-e-r-v-o-u-s.com/shop/product.php?code=85
sterling silver version: http://n-e-r-v-o-u-s.com/shop/product.php?code=96
 
If you purchase directly from Shapeways it will not come with a chain.

Pen not included. This sleeve is for Kickstarter backers of the Pen Type-A campaign. If you bought a USA made version of the pen at shop.cwandt.com, it'll fit, but it will not be a snug fit. These sleeves sometimes comes with some extra powder in it, please make sure you get it all out. Video of powder removal -> https://vimeo.com/47323037

I created the skeleton of a skeletal Lepidoptera. The Death's Head Hawkmoth (Acherontia atropos), seen on The Silence of the Lambs , has a skull marking on its back. I made a full human-like bone structure for the moth, with the grinning skull protruding from its back.

The model is very thin, yet sturdy and flexible. Detail level is fantastic, and the natural texture of the 3d printing process gives it a bone-like appearance that works wonders.

Yes, moths don't have endoskeletons, that's the whole point...

An 3d version of one of M.C. Escher's drawings.

(Note, prices reduced) This is a sound magnifier for your iPhone 4 or 4s (does not fit others), based on the old Gramophones of the late 19th and early 20th Centuries. NOTE: BASE AND HORN ARE NOW SOLD SEPARATELY FOR TECHNICAL REASON. THIS FILE IS THE BASE ONLY. SEE THIS LINK FOR THE HORN: http://shpws.me/5i0B . (Adding this to cart will add both)

---

Want to get a set?

+

---

This detailed model of the moon is hollow and therefore very price efficient. It will balance on a small gap on the bottom. You can also hang it on a wire using a bent paperclip. See video and images. Made for full color sandstone.

This is a new version of the Hand- Heart sculpture. It includes loops that make for easy attachment of a necklace chain!

*Chain NOT included* If you are looking for a chain, here's a helpful link!: Chains

UPDATE: Click this link to see the new version with loops for easy addition of a necklace chain! *Chain NOT included*

Makes a great Valentine's Day gift!!

They balance nicely on the top to fingers. With some dexterity they can also be fashioned into a necklace.

A ring with crystals growing from it .

*Hole diameter 18,20mm* Size 8.


*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring

Ever lose the little plate with nowhere to put your cup of espresso? It's confusing. Designed to eliminate the need for a plate or coaster, the plateless espresso cup can sit directly on the table without leaving a ring behind. Without the plate, you can move from room to room with your espresso and still have one free hand. You'll find yourself wondering why espresso cups ever got involved with the little plates in the first place. Can hold up to 90ml.

Size 6 Size 7 Size 8 Size 9 Size 10 Size 11 Size 12

The Skull Ring by Bits to Atoms is 3D printed in stainless steel with a tessellated and slightly pitted texture. A masculine piece that works just as well with denim jeans and a t-shirt as it does with a 3 piece suit (or formal dress).Please contact for bespoke sizing.

This is an iphone 4/4s case
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card holder, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. **

This Design has been printed and tested.. You can now safely purchase it.

I have several variations of this case that fit the iphone 5 and soon the Glaxy S3. I also have variations with kickstand and earbud organizers. Check out my store and have other features like kickstand. So if you like to see other models visit shapeways.com/shops/amznfx

**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
 the bikini Wallet

** metal piece for the bottle opener has been created but needs to be purchased SEPARATELY. it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.

Go to amznfx.com/shopping-cart

My iPhone 5 case. The jaw serves as a clip for your pocket, pack strap, purse, belt, sock, underpants, or karate head band, etc. You can also stuff cash, credit cards, business cards, etc under the skull. The shapes reference the 6 primitives used in digital modeling. RIP Steve Jobs

A triply model, composed of three interlocked but separate matrices, which is nearly impossible to make without 3d printing!
Suitable as pendant, key fob or fidget toy :-)
Also available as a pair of earrings(including silver hooks).

Designed for the Strong and Flexible materials.
Strut thickness : 1mm.
Hole size 4-5 mm.

Big available here: here it is.

Solo e Sola is an espresso cup that holds a single cigarette.

The Solo e Sola cup was inspired out of need, and could be used to build an entire business model... imagine a food truck offering single espresso shots with single cigarettes. Currently illegal, probably unhealthy, yet understandably desirable, Solo e Sola is a serving piece for a food truck, a cafe or a restaurant, or individuals.

A product of Tomorrow Lab’s CoBuilt process [ http://tomorrow-lab.com/cobuilt ], this cup was developed for a low cost using rapid fabrication processes including an inhouse MakerBot and Shapeways.com.

No matter what everyone say... you deserve it!
It is written on the ring to remember you about this fact.

The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.

Use one of the following links to choose a different ring size.

US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in

US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in

US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in

US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in

US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in

US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in

US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in

US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in

US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in

US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in

Other size needed? Just send me a message!

Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.

A LEGO scaled version of the Master Sword, a blade featured in The Legend Of Zelda: The Wind Waker. Note: The hilt was altered slightly to look more like the original, hence it looks different on the new renders.