by
TheoJansen
[Note: This propeller propulsion add-on does not include a 3D printed Strandbeest, which should be bought seperately! This propeller does not fit the Ondula version!]
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
by
virtox
Cubichain bracelet (for custom sizes)
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 to 24cm/5.5 to 9.4 Inch.
Actual length may vary about 5%, but material will stretch a little bit.
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
Enter this cm value in the Inner Length field.
Popular sizes
You can order most popular sizes directly via the links below, this is cheaper and faster!
XS 14 cm/ 5.5 inch
S 16 cm/ 6.3 inch
M 18 cm/ 7.1 inch
L 20cm/ 7.9 inch
XL 22cm/ 8.7 inch
XXL 24cm / 9.4 inch
A matching necklace available here:
Cubichain Necklace 8
Remove Label
To aid in production and sorting the model will be labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 to 24cm/5.5 to 9.4 Inch.
Actual length may vary about 5%, but material will stretch a little bit.
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
Enter this cm value in the Inner Length field.
Popular sizes
You can order most popular sizes directly via the links below, this is cheaper and faster!
XS 14 cm/ 5.5 inch
S 16 cm/ 6.3 inch
M 18 cm/ 7.1 inch
L 20cm/ 7.9 inch
XL 22cm/ 8.7 inch
XXL 24cm / 9.4 inch
A matching necklace available here:
Cubichain Necklace 8
Remove Label
To aid in production and sorting the model will be labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
by
zinnsoldat
A high resolution model of the original movie requisite. It is very exact modulated from sketches of the movie.
by
vertigopolka
This stretchy twisty spiral bracelet is surprisingly strong and flexible, and has an inside diameter of 63mm (approx. 2.5 inches).
Other sizes available:
Thin Spiral Bracelet medium 69mm inside diameter (approx. 2.75 inches)
Thin Spiral Bracelet large 76mm inside diameter (approx. 3 inches)
Other sizes available:
Thin Spiral Bracelet medium 69mm inside diameter (approx. 2.75 inches)
Thin Spiral Bracelet large 76mm inside diameter (approx. 3 inches)
