David Holloway

Bogey

Been modeling all me life. Always will.

44
Followers
0
Following
Bogey's
Bogey commented on Airfix HMS Tiger 1/600 scale upgrade kit. by Bogey
December 7, 2016
Airfix HMS Tiger 1/600 scale upgrade kit.
Bogey Hi Capn. Thanks for the suggestion. I don't actually have the 600 scale Airfix Tiger, and so hadn't noticed that. I have been working from the 700 Revell, which is waterline. I have been trying to score the Airfix kit on ebay for some time now, but failing that I will see what I can do. I can be difficult to match parts, without the kit in front of you.
Bogey I should have mentioned that I have omited the ladder, as that is much better added in photo etch, available elsewhere.
Bogey The pics are up, and as you can see, these could be further enhanced with the addition of the water cooling pipes fashioned from very thin wire.
Bogey Thanks to some better referance material appearing on the internet, the twin 6 inch turrets have hade a serious make over. Far more accurate and detailed, and I have also been able to included barrels this time. If anyone that has priviously bought the kit would just like to upgrade the turrets, pm me and I will make them available. Other scales will follow shortly, allthough barrels my still not be possable in 700 scale. I will post before and after render soon. cheers, Bogey.
4.5 Mk6 Naval Gun and Limbo Mk 10 Mortar. 1/350.
Bogey Hi gattman thanks for your inquiry. I have been working on a complete kit of the RAN Daring, HMAS Vampire, and there is a set of three 4.5s and the limbo for that ship already. There are however some slight variations in the layout of the cover plates between ships. Which one was you intending to do, so I can match them correctly.
Bogey commented on Scharnhorst by Bogey
April 26, 2015
Scharnhorst
Bogey Thanks, You are quite correct. I have rectified the file.
Bogey commented on HMS Tiger upgrade kit. 415 scale. by Bogey
March 24, 2015
HMS Tiger upgrade kit. 415 scale.
Bogey I had a few request to provide this kit in the Frog / Novo 415 scale. I have altered the kit slightly from the 600 scale version. I have removed the 6inch turret's base ring, as this is included in the kit this time. Also I have provided barrels for the 6 inch. They are still slightly over scale, but are an improvement over the kit version. As they are separate pieces, it is still possible to use ether the kit, or custom made brass barrels.
Airfix Leander to Rothesay Conversion Kit 2. 1/600
Bogey Here is a render of the boats, including the new kit upgrades, and the ribs nearing completion, ready for the next conversion sets.
Bogey If you would only like the upgraded boats, I will be adding one or two sets shortly, to cover a range of ships.
Bogey After working on some 350 scale parts, I remodeled quite a few of the objects with increased accuracy and detail. I have now rescaled them down to pass on the improvements to 600 scale fans. The ships boats have had a total make over, with a new 25ft fast motor launch, and a completely new 27ft whaler. Also the 4.5 mounting has been remodeled with greater accuracy and detail. The Limbo has been upgraded and now comes in separate pieces. One bed, and two sets of barrels. One set to represent straight up, or reloading. The other angled forwards and can be positioned to either side. The Exoset Leander kits now have the 27ft Cheverton work boat in place of the 25ft motor launch. More good stuff to come soon.
Bogey commented on Airfix Leander to Rothesay Conversion Kit 1/600 by Bogey
February 10, 2015
Airfix Leander to Rothesay Conversion Kit 1/600
Bogey After working on some 350 scale parts, I remodeled quite a few of the objects with increased accuracy and detail. I have now rescaled them down to pass on the improvements to 600 scale fans. The ships boats have had a total make over, with a new 25ft fast motor launch, and a completely new 27ft whaler. Also the 4.5 mounting has been remodeled with greater accuracy and detail. The Limbo has been upgraded and now comes in separate pieces. One bed, and two sets of barrels. One set to represent straight up, or reloading. The other angled forwards and can be positioned to either side. The Exoset Leander kits now have the 27ft Cheverton work boat in place of the 25ft motor launch. More good stuff to come soon.
Bogey commented on 1/600 Scale Leander Ikara Conversion Kit by Bogey
February 10, 2015
1/600 Scale Leander Ikara Conversion Kit
Bogey After working on some 350 scale parts, I remodeled quite a few of the objects with increased accuracy and detail. I have now rescaled them down to pass on the improvements to 600 scale fans. The ships boats have had a total make over, with a new 25ft fast motor launch, and a completely new 27ft whaler. Also the 4.5 mounting has been remodeled with greater accuracy and detail. The Limbo has been upgraded and now comes in separate pieces. One bed, and two sets of barrels. One set to represent straight up, or reloading. The other angled forwards and can be positioned to either side. The Exoset Leander kits now have the 27ft Cheverton work boat in place of the 25ft motor launch. More good stuff to come soon.
Bogey commented on 1/600 Early Exocet/Seacat Fit Leander Kit 1 by Bogey
February 10, 2015
1/600 Early Exocet/Seacat Fit Leander Kit 1
Bogey Hi chewitt13. Sorry for not replying sooner. I dident get a notification that you had posted a comment. I would like to say you did an absolutely stunning job of the Leander. I have been going over a few of the parts in the kit, and took note of your comments about the Limbo Launcher. So, after working on some 350 scale parts, I remodeled quite a few of the objects with increased accuracy and detail. I have now rescaled them down to pass on the improvements to 600 scale fans. The ships boats have had a total make over, with a new 25ft fast motor launch, and a completely new 27ft whaler. Also the 4.5 mounting has been remodeled with greater accuracy and detail. The Limbo has been upgraded and now comes in separate pieces. One bed, and two sets of barrels. One set to represent straight up, or reloading. The other angled forwards and can be positioned to either side. The Exoset Leander kits now have the 27ft Cheverton work boat in place of the 25ft motor launch. More good stuff to come soon.
Bogey commented on 1/600 Scale Gun Leander Upgrade Kit by Bogey
February 10, 2015
1/600 Scale Gun Leander Upgrade Kit
Bogey After working on some 350 scale parts, I remodeled quite a few of the objects with increased accuracy and detail. I have now rescaled them down to pass on the improvements to 600 scale fans. The ships boats have had a total make over, with a new 25 fast motor launch, and a completely new 27ft whaler. Also the 4.5 mounting has been remodeled with greater accuracy and detail. The Limbo has been upgraded and now comes in separate pieces. One bed, and two sets of barrels. One set to represent straight up, or reloading. The other angled forwards and can be positioned to either side. The Exoset Leander kits now have the 27ft Cheverton work boat in place of the 25ft motor launch. More good stuff to come soon.
Bogey commented on 1/600 Early Exocet/Seacat Fit Leander Kit 2 by Bogey
February 10, 2015
1/600 Early Exocet/Seacat Fit Leander Kit 2
Bogey After working on some 350 scale parts, I remodeled quite a few of the objects with increased accuracy and detail. I have now rescaled them down to pass on the improvements to 600 scale fans. The ships boats have had a total make over, with a new 25 fast motor launch, and a completely new 27ft whaler. Also the 4.5 mounting has been remodeled with greater accuracy and detail. The Limbo has been upgraded and now comes in separate pieces. One bed, and two sets of barrels. One set to represent straight up, or reloading. The other angled forwards and can be positioned to either side. The Exoset Leander kits now have the 27ft Cheverton work boat in place of the 25ft motor launch. More good stuff to come soon.
20mm Oerlikon and Twin 20 mm Oerlikon 1/35 Scale
Bogey Early experiments with SWF material proved to be not really successful. While the material is tough enough, detail suffered, and as such I will now make this and the other similar products only available in FUD. In the near future I hope developments in printing and materials will give us a stronger material for more demanding environments.
Next
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.