(Does not actually make sound)
Recommended material:
White Strong and Flexible
This pile of pixels is an exact match in numbers and colors that is required to assemble a Mario spite! Of course you could use them to make your own sprites. Mario is just a suggestion :).
Please let me know if you like this type of item and I will make ...more!
VERY IMPORTANT! What you do need to build sprites with these pixels is the 25x25 Grid! It can be found HERE
I also have Double and Triple Starburst Rings that feature starbursts in different sizes. If you like this ring, check them out, too!
I just received my print, and it's more flexible than I imagined.
Check out the attached video that shows its flexibility!
A bottle opening ring customized with your initials that's what!
You'll impress everyone when you pop open your frosty beverage with your unique, customized, stainless steel ring!
Sure you could buy a cheap bottle opener ring from Amazon that was made in China, but you won't find one that's customize-able with your intials anywhere else!
The text is available in either a contemporary Helvetica style font or classic Blackletter Old English font (see text sample image) and you can choose from either an oval, square or round base.
The rings are designed manually by Noesis Design and 3D printed in Stainless Steel by Shapeways.
When customizing you will be able to decide on:
-The initials you'd like on the ring (1 minimum, 3 Letters maximum)
-The font you'd like to use (Helvetica or Old English)
-The base style (oval, round or square) and
-Your ring size (Available in size 8,9,10 or 11)
Not sure what size you need? Try this!
Ring Sizer
The Lightclip was designed specifically for 3D printing in White Strong and Flexible. This material is very strong (obviously), affordable and an excellent light diffuser. The Lightclip emits a beautiful ambient light, which is evenly distributed and very easy on the eyes. Use it as a nightlight, at a camping trip or when in need of a superhero!
You can order it in any of the available colors for this material.
Please note that colors other than white block quite a bit of the light, but look amazing in a dark room and the Bat Signal is extremely bright!
Enjoy!
A 3D rolling ball maze with a bone-like matrix in a clear cube| pirate
pocket puzzle |Reach the treasure to solve the maze
Color and material options are in the "Select Material" drop-down list on
the right. If you want an option not shown or would like a quantity
discount, please click on the "Contact Designer" button to write me an
email.
A pirate chest recently washed ashore containing a never-before-seen hand
carved puzzle. The carvings on the chest indicate that the puzzle is a 3D
maze map through the caves on Dragon Fang’s island where the vast treasure
from the pirate ship Black Lion is hidden. You open the chest only to find
that the main body of the maze looks eaten away to the “Bare Bones.”
Luckily, there is a clear case in the chest as well, and a small brightly
colored ball that will help guide you. The ball fits into the maze at the
round mouth of the cave maze in the corner of the cube. The maze then
slides into the clear case; it is a perfect fit. You shove the sturdy case
with its precious map into your pocket. The question is, can you solve the
mystery of this maze and find the treasure? The carvings on the chest show
that your goal is shown as another round ring with the remains of an “X”
along its border.
To get there, roll the ball along the bones of the maze to try to reach
the treasure. Your ball can travel up, down, fore and aft, port (left) and
starboard (right) to travel through the maze. The clear walls allow you to
easily see exactly where you are in the maze, and which directions can be
tried next, but getting there is harder than it looks. Argggh, there have
been plenty of “Bones” cleverly placed along the tunnels to trip up any
unwary pirates and keep them from reaching the treasure. These can lead
you astray or plunge you into a deep pit.
The “X Marks the Spot” where your treasure is found. If you reach the
treasure you are not done yet matey! You have to return safely back to the
mouth of the cave. Be wary though, there are new perils on the way back,
and many pirates have never found their way back out. The true brave of
heart can enter again to see if they can find the treasure again, this
time, faster!
Good Luck Maties!
The 3D maze fits snuggly inside the 2 inch by 2 inch by 2 inch clear
plastic cube. The clear cube also serves as a display quality case for
this clever pirate work of art. This clear plastic display cube
is sold separately, and is available for around $3. Use the link below
to purchase it with free shipping. Note that this plastic cube
display case is part of this rolling ball 3d maze puzzle and is required
for the proper working of the maze.
Medium
Size BCW Maze Puzzle Display Case for Bare Bones for customer in the
USA
Display
Case for Bare Bones for UK Customers
Start by setting one of the “U” shaped halves of the clear case on a table
with the sides of the “U” facing up. Before putting the “Bare Bones” maze
in the case, orient it so the circular mouth of the cave (the one in the
corner) is on the bottom. Place the ball on the bottom of the “U” of the
case, such that when you next slide “Bare Bones” down into the case half,
the circular mouth of the maze goes over the ball. Next carefully slide
the top half of the case on. The photos and video above illustrate how
this is done. You are now ready to start solving this maze puzzle.
Many a pirate has been lost in the cave, but have no fear - you can slide
open the two halves of the case and the ball can easily be shaken out to
start solving the maze game over again.
You can easily color the ball to make it show up even better in the maze.
A quick and simple method is to use highlighter markers, or Sharpie
colored markers. Enamel spray paint for plastic models also works very
well. Spray paint was used to color the ball in the photos.
The clear case is very sturdy, so you can carry this maze puzzle around in
your pocket or your bag. When not being played, this unique new type of
maze can be displayed as a fascinating work of art. Set it on your desk or
shelf, everyone will be curious to know what it is and want to give it a
try.
This new maze design uses thicker rods for the maze. They are also rounded
off so the maze structure looks like a skeletal matrix of linked up bones.
Email me with your questions. Also comments or suggestions for new mazes
you would like to see are always welcome. To send me an email just click
on the “Send Message” link on the right side of this page - just above the
small photos of some of my other maze puzzles.
Best as a complementary to the Leaf pendant.
Also available:
The original Octahedralink Necklace, a 36-inch necklace with 72 octahedron links, an extra long 55-inch Octahedalink Necklace with 120 links, and the shorter, heftier Octahedron Link Necklace, a 30-inch necklace with 36 larger, chunkier, clunkier octahedron links.
Want to get a set?
(the 36-inch, 55-inch and 7-foot necklaces)
+ 
+ 
When you look at the shape of a heart, you will find that there is a tip and a pit. "they can match", when the idea flashed through my mind, I realize that I can design a pair of gears with same heart shape(I'm major in mechanical engineering), and here is it, a pair of eardrops(without hooks).
I think it is a good idea to give such a gift to your lover. It is a perfect annotation of "My heart follows you".
If you want the gears turn like in the video, you need to order the axis pair and drill two d=2mm holes of distance = 16.5mm on a base by yourself.
You can play an on-line version of this puzzle at Jimmy's website, but if you want to baffle your friends, nothing beats an original 3D-printed Shapeways sample.
Watch the YouTube video.
Please contact Oskar directly if you are interested in obtaining a fully colored sample of this puzzle.
Bub on the front, Bob on the back.
Get two and make them fight for the ultimate highscore!
Not printed yet but should work fine.
1,5mm per pixel and 3mm thick
The great thing about these is that they won't look cheesy on the outside, as they will appear to be plain cylinders with some rings removed.
Discrete and low profile, yet classy. Ideal for fashionable mechanical engineers.
This Super Pipe Hanger has 6cm lenght.
Available in white, black and red (blue and the traditional green are sold out) and three diferent lenghts (4, 5 e 6 cm)!
DISCLAIMER:
Make sure you understand all specifications of this piece (such as surface finish, colors, size, etc) before you order one! Any questions? Do you want this piece in others dimensions? Drop me a note!
Your country may charge some importation tax. For more information about that I recomend contact the customs office of your country.
--
Anda pendurando suas coisas em cabides chatos? O cabide Super Pipe é uma maneira legal de pendurar casacos, chapéus, toalhas e bolsas! Mas cuidado! Não sou responsável se um par de "estranhos" encanadores italianos com grandes bigodes sairem deles! (;
Este Cabide Super Pipe tem 6cm de comprimento.
Disponíveis em branco, preto e vermelho (azul e o verde tradicional estão esgotados) e três comprimentos diferentes (4, 5 e 6 cm).
ATENÇÃO:
Certifique-se de que entenda todas as especificações das peças (como acabamento, cores, tamanho, etc) antes de adquirí-la! Tem alguma dúvida? Entre em contato!
AOS COMPRADORES NO BRASIL:
Este produto é importado e sobre todo produto de importação a receita federal pode cobrar taxa de importação das peças. A alíquota pode variar entre (60%-100%) e incide sobre o valor total da compra.
Twice Rings have two different sized finger passages. You can share your ring, change fingers and be more comfortable. This small koru ring has finger passages of size 7 and 8. Remember to buy the matching insert for your ring. The inserts are swappable, so you can mix and match the color!
Choose a matching insert.
Choose a different size ring.
