Important notice: a lot of people have been very happy with this product, but, as can be read in some of the comments below, it's clear that this design is right on the edge of what Shapeways can produce to the right quality at this moment. If you buy it, there's a risk of having a less then perfect fit, colors can be different from what you see on the screen, and, depending on how you use your phone as well as the tolerances of the case, it has been reported that the polyamide material can give a sort of polishing/scratching effect on the metal rim of the phone (you can find descriptions online of how to remove these kind of blemishes, but it may still be annoying).
Shapeways has, in my experience, been very good with customer service on this item, so they'll be happy to either return your money or provide a new product if you would be one of the unlucky ones; but it's up to you if you want to run the risk that you may have to go through this process.

Essential protection for iPhone 4S and iPhone 4

Even though 4-4 may be the worlds lightest and smallest iPhone 4 case, it still provides great protection to the vulnerable edges of the iPhones' front and back covers - while all controls and connections remain accessible. Its slightly protruding profile helps prevent protect the glass when laying your phone down; using 4-4 can also help to avoid signal loss problems.

This bumper-style case may be combined with commercially available screen protectors. 4-4 is manufactured from tough and durable 3d printed polyamide; it has a slightly textured surface that gives you great grip on your phone. Available in white, black and limited edition colors - note that in white, the 3d printed material may get dirty more quickly - but you can (seriously!) dishwash this product, so that shouldn't be too much of a problem. The 4-4 case is designed to have a tight fit around for iPhone. To put the iPhone in the case, or take it out, start at one of the bottom corners, where there are no buttons. Colors in the images above are for reference only; please check under 'select material' to get the most up-to-date preview of currently available product colors. Product is shipped in basic Shapeways packaging.

4-4 fits the GSM and CDMA/Verizon versions of iPhone 4, as well as the new iPhone 4S.

A two pack of 4-4's in the same color is available at reduced prices here.

You can have a look at all the products in my shop here. Consider buying 4-4 together with The Wrap, a handy cable winder for the European iPhone charger.

If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com.

The third public evolution of the Animaris Geneticus Parvus. #7 has evolved legs, with pointy feet instead of flat. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros".
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!

The mechanism is printed assembled, and will work without further assembly right after birth from the printer.

A few tips to consider:

- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!

- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.

- The best way to push it is by its nameplate. Do not push down, but forward.

- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.

A replica of Cobb's totem from the film "Inception". As a below review has noted, and from my own version, the top works very well, and spins upwards of 90 seconds before toppling. You just might be in a dream.

Sad Keanu comes in two sizes

Both are equally sad.

Teeny Keanu ($25) Little Keanu ($45)

---

Want to get both?

+

---

Cheer up, Little Keanu Reeves, it's ok. Just finish your sandwich and march on. Life is like a box of chocolate. Which pill will you choose? There is no spoon. You can't handle the truth! Wait. What was I doing again?

If M.C. Escher had owned fidget toys, he would have worn "One ring to rule the ball" as a pendant. A single, continuous line contains a small ball that makes orbit after mesmerizing orbit but cannot escape, always held down in four directions. Available in solid, durable stainless steel with optional antique bronze and gold plated finishes to fit any context, "One ring to rule the ball" now also includes a free rubber necklace so that you can confuse your mind any time the fancy strikes you! One customer echoes many others in saying, "I couldn't put it down. This thing is just too fun!"

Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com

Cheer up, Little Keanu Reeves, it's ok. Just finish your sandwich and march on. Life is like a box of chocolate. Which pill will you choose? There is no spoon. You can't handle the truth! Wait. What was I doing again?

Sad Keanu comes in two sizes. Both are equally sad.

Teeny Keanu -- 2.6inches -- ($25) Little Keanu -- 4inches -- ($45)

---

Want to get a set?

+

---

My case for Raspberry Pi computer. To be assembled with the "LED lightguide" model nr. 486757 (http://shpws.me/6yFP). This is the case everyone is talking about! ;) Features: snap-fit fixing system for the board, easy to mount/unmount; snap-fit closing system, no screw required; bottom holes for blocking the computer by screws (sliding mount); led lightguides (not included in this model, available here: http://shpws.me/6yFP ); pre-shaped hole for GPIO access, just cut it out to open. In this page you can find a gallery of shots working cases by enthusiast users! http://marcoalici.wordpress.com/raspberry-pi-case-gallery/

Nuke Lamp it's is a unique table lamp, its complex surfaces were created using real fluid dynamics simulations.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed  piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com  for shipping address.
Thank you.

Bicycle Chainring Cufflinks perfect for use in a French cuff shirt.

-Default size is D.18mm (finger diameter) - Assassin's ring the size is adaptable because the ring is flexible - now the model is a Co-creator - Suggest for all... if you want enlarge the ring you have to flex the wings,not the Assassin symbol

Bracelet based on branching pattern.
Default diameter is 65 mm (various sizes available).
Also available as ring.. Please contact us

Updated Geometry/ Issues fixed

Bracelet based on branching pattern.
Default diameter is 65 mm (various sizes available).
Also available as ring.. Please contact us

Updated Geometry/ Issues fixed

love hurts...but it's fashionable. Clip on back slides into pocket or hangs on pin. Can also be strung as a necklace. Depicting the beauty & pain associated with love… white symbolizing purity, red for passion, black for loss, & silver for reward. The trickle of blood symbolizes sacrifice. It was inspired by the irony of such conflicting emotions within the experience of a relationship.

love hurts...but it's fashionable. Clip on back slides into pocket or hangs on pin. Can also be strung as a necklace. Depicting the beauty & pain associated with love… white symbolizing purity, red for passion, black for loss, & silver for reward. The trickle of blood symbolizes sacrifice. It was inspired by the irony of such conflicting emotions within the experience of a relationship.

UPDATE: Click this link to see the new version with loops for easy addition of a necklace chain! *Chain NOT included*

Makes a great Valentine's Day gift!!

They balance nicely on the top to fingers. With some dexterity they can also be fashioned into a necklace.

This is the PUPIL eye-tracking headset. It is part of the PUPIL project on code.google.com/p/pupil. This is the second tested public release of the hardware. Revision 012.

(As material we have tested all SLS-nylon versions from shapeways - they call it strong and flexible. We recommend white polished or black.

This adapter holds your Apple "MagSafe to MagSafe 2 Adapter" snugly and hooks to your power adapter's cord. For that power adapter that is used to serve both old and new Macs!

...but not that cheap...

The original Eardrops
A pair of elegant spiral droplet earrings.
Absolutely stunning in the new Premium Silver!


I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included)
These are availble at your local bijoux or jewellery store or via websites.
If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!

More earrings

The Wrap - cable winder accessory for European iPhone charger

If you are from Europe and have a recent iPhone, you will probably recognize the charger shown here. You may also have noticed that you can almost wind your USB cable around it - but not quite, frequently resulting in pocket spaghetti.

I realized that one end of the charger is already perfectly fit for the job, and all you really need is the same shape on the other side as well. The Wrap provides just that, clipping securely onto the USB plug.

The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Works with recent European iPhone chargers and USB cables as shown in the images, up to iPhone 4 and 4S - please check before you purchase. Does not work with iPhone 5 cables. To save on shipping costs, you may want to consider buying two or more; you know your friends will love you for it. Product is shipped in basic Shapeways packaging. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off.

You can have a look at all the products in my shop here. If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com, or contact service@shapeways.com. If you like, follow me on twitter.

By popular demand, a US version of The Wrap is now available here.

A wholesale offer of 5 units of The (European) Wrap at reduced prices is now available here.

Phamora Ceramics!

Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!

A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.

Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.


Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.

Detailed sniper assault rifle with flip-down bipod converts into a 56mm robot action figure with 9 points of articulation.

Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose). Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.
 
Supplied as a 18-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours . 

Assembly and conversion instructions available HERE.

Detailed sniper assault rifle with flip-down bipod converts into a 56mm robot action figure with 9 points of articulation.

Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose). Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.
 
Supplied as a 18-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours . 

Assembly and conversion instructions available HERE.

arDrone 2.0 bracket for GoPro 1 & 2 cameras
NOT COMPATIBLE with GoPro HERO3 - New design will be available shortly.

NEW click here for GoPro Hero3 mount for arDrone 2

This is 5 parts which must be cut appart before installation.
Instructions for installing the mount on your arDrone https://vimeo.com/55233318

EDIT - just added the extender to this product, it is two parts, put foam between them to lower the camera and further reduce vibrations.

I have some video on Vimeo, this was shot in WINDY conditions and look pretty bad, but you get the idea, as soon as the weather in LA improves for flying small copters, I will be updating the video. www.vimeo.com/41468132

GoPro Hero2 - I recommend cutting a disc of Lee Filter 9ND-P3 and sticking it under the glass on the protective cover as that will reduce the shutter speed and practically eliminate jello.

GoPro Hero1 - have slower shutterspeed and don't suffer as much from jello as hero2, but you can also use ND film to further reduce jello if required.

All kinds of precautions apply to this product, Im not responsible for your flying of this. or what you may do to your arDrone or GoPro camera... if somebody print this in red, do send me some pictures.

NOTES on getting beautiful video with arDrone-GoPro combinations. First, you MUST understand that even the arDrone 2.0 is under powered for wild flying. to stay in the air it must use power to force air down.. when you hang a GoPro under it, the battery empty faster because it use more power.
NEXT, understand moving, happens by the drone tilting, so it essentially is "sliding down a hill" by being at a angle.. so now to keep the same altitude the motor must work even harder.
Combining the sliding down a hill motion and the weight of the GoPro, means you are operating at the limit of what is possible with a arDrone. as a result the props and motors work hard creating lots of vibrations and shaking.
The solution is flying EARLY in the morning, when the air is cool and there is absolutely no wind or even a breeze, in completely still air, the arDrone do not need to compensate for wind and will fly much more stable and smoothly, and the motors will have less work to do, resulting in less vibrations. Early morning flights is key to getting amazing beautiful video from a GoPro mounted under a arDrone. There.. NOW you know. Happy Flying.

This sale include all parts required to mount you GoPro, arms and the adjustable cradle, it do NOT include arDrone, GoPro, GoPro protective lens.

A matching pair of earrings, resembling small twigs.
Absolutely stunning in the new Premium Silver!
These are actual photos!

Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings

Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.

A matching pair of earrings, resembling small twigs.
Absolutely stunning in the new Premium Silver!
These are actual photos!

Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings

Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.