Important notice: a lot of people have been very happy with this product, but, as can be read in some of the comments below, it's clear that this design is right on the edge of what Shapeways can produce to the right quality at this moment. If you buy it, there's a risk of having a less then perfect fit, colors can be different from what you see on the screen, and, depending on how you use your phone as well as the tolerances of the case, it has been reported that the polyamide material can give a sort of polishing/scratching effect on the metal rim of the phone (you can find descriptions online of how to remove these kind of blemishes, but it may still be annoying).
Shapeways has, in my experience, been very good with customer service on this item, so they'll be happy to either return your money or provide a new product if you would be one of the unlucky ones; but it's up to you if you want to run the risk that you may have to go through this process.

Essential protection for iPhone 4S and iPhone 4

Even though 4-4 may be the worlds lightest and smallest iPhone 4 case, it still provides great protection to the vulnerable edges of the iPhones' front and back covers - while all controls and connections remain accessible. Its slightly protruding profile helps prevent protect the glass when laying your phone down; using 4-4 can also help to avoid signal loss problems.

This bumper-style case may be combined with commercially available screen protectors. 4-4 is manufactured from tough and durable 3d printed polyamide; it has a slightly textured surface that gives you great grip on your phone. Available in white, black and limited edition colors - note that in white, the 3d printed material may get dirty more quickly - but you can (seriously!) dishwash this product, so that shouldn't be too much of a problem. The 4-4 case is designed to have a tight fit around for iPhone. To put the iPhone in the case, or take it out, start at one of the bottom corners, where there are no buttons. Colors in the images above are for reference only; please check under 'select material' to get the most up-to-date preview of currently available product colors. Product is shipped in basic Shapeways packaging.

4-4 fits the GSM and CDMA/Verizon versions of iPhone 4, as well as the new iPhone 4S.

A two pack of 4-4's in the same color is available at reduced prices here.

You can have a look at all the products in my shop here. Consider buying 4-4 together with The Wrap, a handy cable winder for the European iPhone charger.

If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com.

Make your own slide-on macro lens for the iPhone 4 or 4S. I designed this for my iPhone 4 when I couldn't find the image quality I wanted for less than $60.

Print this model and then buy the glass lens for $4 from Surplus Shed (http://www.surplusshed.com/). The Surplus Shed part number is L4471. For some reason the search box on the Surplus Shed home page does not work with part numbers. To get to L4471, use the "Lens Finder". In the Lens Finder type:

Lens Type: PCX, Plano Convex
Diameter: 12mm to 12mm
Focal length: 51mm to 51mm

It will get you to L4471

The lens fits in a recess in the model and is held in place with a few tiny drops of Superglue. If you get any glue on the lens it can cleaned off with nail polish remover or acetone. The lens is plano-convex (one side is flat). When inserted in the holder, the flat side of the lens faces the phone.

Note that the lens fits pretty snugly into the opening. Try fitting the lens before applying any glue. A good technique is, with the lens holder laying face-down on a table, lay the lens in position, and then push it into the recess by poking the lens with the eraser-end of a pencil. Once you know the lens fits cleanly, push it back out and put two tiny drops of superglue on opposite edges of the opening. I use a toothpick to apply the glue because squeezing the superglue directly out of the tube risks putting on too much. Then push the lens back in the same way as in the test fit.

The object pictures in the photo gallery (dime, ruler, and watch) are unedited and uncropped shots directly from my iPhone4.

This model will not slide over iPhone cases.

Our entry into the Siri design competition, an accessory which slides onto the iPhone and serves as the 'face' of Siri. The androgynous face has a wry, elusive smile suggesting the machine knows something that the user does not. Behind Siri's all-knowing gaze, the glow of the iphone screen is visible through the sculpture, and the main buttons are still accessible even when the screen is obscured. The design, when placed over the iphone, forces the user to interact with Siri instead of tapping on the screen to engage commands. For more complicated tasks requiring the screen however, the phone can easily be slipped out of the top of the case.

Product Name "Brick Ring". Designed by Japan.

Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.

The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
The brick can be attached by all the sizes.
Please refer to a this page.

Conversion chart for ring sizes

US Ring Size      Inside diameter
       8                         18.1mm
       9                         19.0mm
      10                        19.8mm
      11                        20.6mm
      12                        21.4mm
      13                        22.2mm

Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma

Puzzle Case will set your iPhone apart from all the rest. Order this one-of-a-kind design with your choice of color for the top and bottom pieces. This is the top piece. Be sure to also order at least one Puzzle Case Bottom piece. http://www.shapeways.com/model/362223/puzzle_case_bottom.html

Please read the entire listing. Thank you!

Make your designer puzzle style case even more unique by choosing the style and color of each side.

Choose either a swirl or gear motif for each side, then choose your color.


**MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!**


Reminiscent of Victorian filigree, this half of your unique Designer iPhone 4S/4 case is a durable and stylish alternative to mass produced cases on the market today.

Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).

This case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)

Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.

The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!

*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY

Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.

I designed it for easy access to all buttons, ports and controls.

The colors available are what Shapeways currently offers.

*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.

*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case. Watch these videos to see how to put on and take off this snap style case:
On: http://youtu.be/PEE4IV3JS90
Off: http://youtu.be/qlcGGMVAwIs

*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.


To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.

- Structure on the back of bumper to wind your earphone cord. No more chaos with earphone cord!

- Will work with most of earphones including stock iphone4 earphone.

- Raised volume and lock keys for easy clicking.

 

'Pixel' is a D.I.Y. iPhone 4 / 4s case. Its been designed with the creative in mind, and those who aren't pleased with the same look day-in day-out.

 

With multiple color options and new colors on their way, this case provides a high level of customization.

 

The 'Pips' which can be bought here, can easily be separated from one another with a scalpel or craft knife. Then simply push the 'Pips' into any of the corresponding holes on the case. They will hold snugly and allow for easy removal and re-design.

 

Short words or initials work well too!

 

Create away!

 

Note: Care must be taken to remove all the post material that connects the individual 'Pips' otherwise they may not fit side by side perfectly.

 

To my shop

You can store your credit card and USB flash drive in this multi-functional case!! Transcend JetFlash T3 Series drive fits in it.