A replica of Cobb's totem from the film "Inception". As a below review has noted, and from my own version, the top works very well, and spins upwards of 90 seconds before toppling. You just might be in a dream.

Nuke Lamp it's is a unique table lamp, its complex surfaces were created using real fluid dynamics simulations.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed  piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com  for shipping address.
Thank you.

Type in your text and we turn it into a customized metal branding iron.

Does not include the lighter.
The lighter is a BIC World, Classic, Maxi.

Want to make your own? Download the lighter attachment part here: http://www.shapeways.com/model/121517/ Do not flip/mirror the image, ie. please upload one you want as the actual result of the branding. If you have trouble uploading image like invalid file type, please make sure the filename has extension, for example, .jpg

This detailed model of the moon is hollow and therefore very price efficient. It will balance on a small gap on the bottom. You can also hang it on a wire using a bent paperclip. See video and images. Made for full color sandstone.

Draw your earrings and we will turn them into 3d.
Instructions:
1) Download Sketch Sheet
2) Scan the sketch sheet and save the image.
3) Click "Personalize" and upload the image.
4) Order your ring in your choice of material. Shapeways will turn your drawing into a printable 3D model, and ship it to you.

Some people are hurt on the outside, but some have their pain somewhere a bit deeper. Wear this pendant to show your awareness of the kinds of pains that can't be seen.

This pendant was made in homage of a certain visual novel that celebrates ones overcoming their wounds that lie both on the inside as well as the outside.

Being at just over one inch square, it is the perfect size for either men or women.

This is an iphone 4/4s case
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card holder, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. **

This Design has been printed and tested.. You can now safely purchase it.

I have several variations of this case that fit the iphone 5 and soon the Glaxy S3. I also have variations with kickstand and earbud organizers. Check out my store and have other features like kickstand. So if you like to see other models visit shapeways.com/shops/amznfx

**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
 the bikini Wallet

** metal piece for the bottle opener has been created but needs to be purchased SEPARATELY. it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.

Go to amznfx.com/shopping-cart

Based on the famous painting that's used to make antiquated versions of rap lyrics.

A ring with your name on a circle. The name will be connected to the other circles with has your name mirrored.

You don't have to catch 'em all, only the one you really care about.

Inspired by a touching proposal shared on the internet, this openable pokeball is just large enough to hold a ring or two. There is also an embossed line of text reading "I Choose You" inside of the lower half of the Pokeball.

Due to this model's recent success, I have decided to open up the available materials to the remaining Strong and Flexible colors as well as the metals.

Congratulations to all of the happy couples!

The Pokeball Ring Box sizes in at 4cm in diameter and opens in two pieces. Currently, this pokeball does not come pre-colored and will need to be painted or colored in some manner. This was decided due to sandstone (the only medium able to be pre-colored) may scratch and scuff anything inside of the Pokeball.

For all you computer animation lovers out there, this cufflink is for you! Note: This is for one cufflink. Order 2 for a full set, unless you rock your own style! For more on my designs, visit www.prero.com.

---

Want to get a set?

+

---

Carry the power of the tri-force with you wherever you go.

Heeey Sexy Lady

[en]
This jewel takes inspiration from our background in the aeronautic industry. In this shop is also available a small version. Please note that necklace is not included.

[it]
Questo gioiello prende ispirazione dal nostro background nell'industria aeronautica. In questo negozio è disponibile anche la versione piccola. Notare che la collanina non è inclusa

This is the “turbine” series.
See also:
turbine pendant (26mm)
turbine earrings

KIORO'design - 3D printed designs
Facebook
Twitter
Tumblr

Proof that it's easy to make fabulously expensive models easily with Mineways: size matters. This one's scaled to print out in color, so really adds up in cost, even with the base being hollow. That said, I didn't spend time making sure all the rooms inside the castle were filled in, so that they could be hollowed out later - I didn't think anyone would actually print this model out! Sarconix did, as a surprise. I suspect I could have saved maybe $20 by placing torches at room doorways and then using the "seal off entrances" option to fill the rooms (which would then get hollowed). Model built by Sarconix in Vokselia, vokselia.com

A new take on the engagement ring. The large diamond (8mm) is also made of steel. This ring was first designed as Ring - Diamonds, but during the test print it turned out that the resolution of the model was to high for the printer.

Contact me if you want a size outside of the co-creator range. I can also provide this ring on request in a plastic material for casting in silver or gold.

"You might belong in Gryffindor,
Where dwell the brave at heart,
Their daring, nerve and chivalry
Set Gryffindors apart"

The ring features the Gryffindor lion crest on the front and the name of the house inscribed along the back band of the ring. The crest measures about 3/4" (2cm) tall by about 1/2" (1.3cm) wide.

The Ring is available in US sizes  4  5  6  7  8  9  10  11 and 12  (click the link for the size you need, This default listing is for a size 9) if you don't know your ring size you can find it here: http://findmyringsize.com/

Be sure to see the rest of my shop for the other house rings! :)

If you have any questions about any of my Harry Potter inspired designs feel free to ask, you can message me here on Shapeways or you can also find me on twitter at: @HallowsNecklace

A nice doorplate in Art Deco style for a posh office. This is customizable using the creator template below! Printed in SWF material, this white looks great on wooden or darkly painted doors. This material also takes acrylic paint nicely, and looks great in metallic colours especially when applied with a dry-brush technique over a darker base coat.

"Wisdom, Courage, and Power."

Now you can wear the symbol of the ancient and powerful TriForce. Courage, Power, and Wisdom will unite at your call, as you rush to save Hyrule.

The bumped version can be found here.

Pictured chain not included in design. Plastic models will not be painted.

Cup capacity = 27 ml
To hold it, wear it as a ring :-)
Related designs:
Espresso & Sake Finger Heart Cup
Sake Finger Cup #1
Sake Finger Cup #2
Sake Finger Cup #3
Sake Finger Cup #4
Sake Finger Cup #5
Sake Finger Cup #6
Sake Finger Cup #7
Dutch Soccer Shoe Universal "Shot Glass" :-)
Knitted Ceramics "Shot Glass"
Gun Barrel Universal "Shot Glass" ;-)
Dutch Shoe Universal "Shot Glass"
"Drink to Your DNA!" - Espresso & Sake Tower (Cup)
Sake & Espresso Spiraling Tower Cup
Triangular Sake & Espresso Tower (Cup)
Rectangular Sake & Espresso Tower (Cup)
Sake Spring Cup #1
Sake Spring Cup #2

Ring size that will go to cart: 12
If you wish to purchase a different size, select the size from the list below.

A very simple ring featuring a Pokeball as its centerpiece. It is simply a single band that meets the pokeball at the center. For measureable size reference, the pokeball is about 7mm across.

Available in the following sizes (please click the size to be brought to the appropriate purchasing site):
5
5 1/2
6
6 1/2
7
7 1/2
8
8 1/2
9
9 1/2
10
10 1/2
11
11 1/2
12

For reference: Ring Size Measurement and Conversion Chart

Protip: color the Pokeball with a bit of acrylic paint or nail polish to deepen the impact of the Pokeball itself. Do NOT use enamel paints on any of the plastics.

Note: this ring does NOT come fully colored. You must choose your printing medium and then paint it yourself (or keep as is). I suggest black detail so you won't have to worry about painting the line between the two halves.

One of the headpieces I created for Halloween 2010. This model is based on a 3D scan of my head to ensure a perfect fit, but it also fit well for everyone else who tried it. In the video below, a VRML viewer was used to explore the design and run around in it like a video game. It is fairly sturdy but be aware that your Head Village may be missing a few trees by the time it gets to you.

A miniature 1.5" tall Playstation 3 trophy.  The diameter of the cup is roughly 5/8". To reduce costs, the cup base was hollowed out and scale was reduced.  

This is not an official licensed Sony product.  Playstation trophy is the intellectual property of Sony Entertainment.

I am offering an updated version of this ring on my etsy store at http://cymonsgames.etsy.com/ 3D printed on my home printer. A smaller version of my TARDIS ring for smaller fingers (to save you material cost). US ring sizes 0-7 available. TARDIS model modified from version created by user Gossamer on thingiverse: http://www.thingiverse.com/thing:13109

NOTE: THIS IS ONE COMPONENT NOT THE FULL PROP! Top half of the Goldeneye 007 Remote Mine Prop. Video of complete and working unit can be found here: http://www.youtube.com/watch?v=3L6eVMm9JNk&feature=youtu.be One of a few components needed to create your very own Remote Mine prop from the Movie/game Goldeneye 007. Please click here for instructions on how to create your own blinking + beeping prop using these parts: http://www.thingiverse.com/thing:54528