The first 3D Printed iPhone 5 Bumper designed to account for differences in outside temperatures that can make other 3D printed bumpers looser and tighter.
HeatLock is designed to be too small for your iPhone 5, which may sound strange, but is actually a revolutionary concept. As the bumper gets hotter, the plastic nylon it is made out of will expand, causing the bumper to get bigger. If the bumper starts too small for the phone, you could heat it up enough to get the case on, then as it cools it will fit perfectly.When your case arrives simply heat it up with a blow dryer or heat gun for a few seconds to expand the plastic. Slip the case on and allow a few minutes for it to cool off. The case should shrink down so that it is snug to your phone.
Prototyping is complete! Model will fit very snug on an iPhone 5 after heating!
Using your bumper:
1. Unpack from box
2. Heat corners of bumper
3. Stretch onto iPhone
4. Keep heating and stretching until bumper fits
5. Enjoy!
To undo case, reverse process. iPhone will not be damaged by added heat; however, Shapeways nor SolidWorks Tech Designs assumes responsibility for any damage done to your iPhone.
Heat Resistance Guide for Materials :
White Strong and Flexible or Colored : 176 Degrees F
White or Black Detail : 118.4 Degrees F
Frosted Plastics : 176 Degrees F
Updates :
10/14/2012 : Model complete. Anylasis inside SolidWorks with an iPhone 5 model confirms all sides overlap iPhone by about 1/30th of its width and height. Holes should align after heating and cooling. Model uploaded.
10/24/12: Model recieved, inaccuracies corrected. Overall size increases and hole location changes. Overall width increased. Ordered another prototype to test new changes.
11/13/12: 2nd Version received. Model is correct and will now work with a slight heat. Model price increased- no longer in prototype.
Please order this case if you are slightly interested and let me know how it turns out! Feel free to DM any messages or questions you may have about design. Stay tuned for future updates!
Your charge buddy on the go.
Clip-it for iPhone converts your Euro iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it lets you wind the usb cable easily around your charger while taking it with you.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock the cable at the bottom. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (European version).
After all the excitement, an US version of Clip-it is available here!
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
The idea for this ring is based on my Sonnet Ring design. Instead of the first verses of a sonnet though, you are free to custom order a ring with your own text, message, proposal or poem.
Maximum number of characters (capital letters only), including spaces: 180 (roughly as much as a mobile text message).
Your text will be engraved on the external surface of the ring and a dedication will be engraved on the inside. The text is placed around the ring in a helix pattern, so that it can be read by simply revolving it in one direction.
Choose your size at the chart above or here (US/CANADA sizes) and co-create your very own ring by pressing the ''Personalize'' button. You can also choose your own dedication which will be engraved on the inside of the ring. Maximum number of characters, including spaces: 50
Note: The item you order may require cleaning of extra support material and/or polishing.
WARNING: Some materials such as Stainless Steel tend to shrink during the manufacturing process, sometimes up to 8%. Keep that in mind when ordering your custom size.
Antique Bronze Matte, Stainless Steel or Gold Plated Matte are our personal favorites, as they emphasize the design with an authentic look and feel.
We recommend using a leather or rubber necklace. (Diameter of the hole is 4 mm, so any necklace of your choice should fit)
Also designed to be used as a key fob.
Because Apple has no plans to sell standalone dock for iPhone 5, I decided to create one. This dock is compatible with the lightning cable sold with the iPhone 5. You just need to put in place the lightning cable and to plug your iPhone!
Features :
- Works with the lightning cable
- Horizontal and vertical orientation
- iPhone speakers acces on the front
- Easy and quick system to place the lightning cable
If you need further information, please don't hesitate to contact me.
You can also check out my iPhone 5 Cases :
iPhone 5 - vGraphene case iPhone 5 - Minimal bumper
Apple didn't make a dock for iPhone 5, but with the standard Lightning cable and this model, you can dock again!
Not only does this dock give you a solid and visually pleasing place to mount your phone, it also ports through the mic and speaker to the front of the dock.
Once you get the dock, you can do some things to dress it up, such as putting something heavy in the internal cavities to weigh the dock down and add some feet to keep it in place. The current design assumes use of feet like these: Silicone Bumpers - Small (8x2mm, 4 pack)
Based on Apple's dimensional drawings for the iPhone 5.
Nomad Panohead Samyang 7.5mm MFT +0° for NEX
Visit thomashuang.net for more information
A compact and lightweight panohead with portability in mind, the Nomad Panohead is quick and simple to use. It is designed to mount a Samyang 7.5mm MFT fisheye lens with a Sony NEX or Micro Four Thirds (MFT) camera for creating spherical panoramic photos in 4 shots. The Samyang lens is also branded by Rokinon, Walimex Pro, and Bower. The Nomad Panohead body and fasteners are sold and shipped separately, due to the production process. You need to purchase fasteners to operate the Nomad Panohead.
- Fixed tilt +0°
- Fixed position at NPP of horizon
- Rotator at 15° increments, indicators for 4 + 6 divisions
- Flip rotator over for smooth rotation
- Free access to focus + aperture rings
- Camera orientation in portrait or 37°, grip up or down
- Material: Polymide 12 Nylon, strong and durable
- 3/8"-16 thread mount (1/4"-20 adapter not included)
- 9000 x 4500 px resolution with 16mp APS-C camera
- 10,400 x 5200 px resolution with 12mp MFT camera
This purchase is for the panohead body ONLY. Fasteners are sold and shipped separately. You MUST purchase fasteners to operate the Nomad Panohead. Camera, lens mount adapter, lens, tripod, monopod, thread adapter, tape, knife, bags, and other accessories in photos and videos are not included and need to be purchased on your own.
Compatible with:
- Sony NEX-7, NEX-6, NEX-5R, NEX-f3 (except +5° in grip up only)
- Sony NEX-5n, NEX-5 NEX-c3, NEX-3
- Olympus E-P1, P2, P3, PL1, PL2, PL3, PM1
- Panasonic GX1 (except +5° in grip up only)
- Panasonic GF1, GF2, GF3, GF5
NOT Compatible with:
- Olympus OMD E-M5
- Panasonic G1, G2, G3, GH1, GH2, GH3
Can be printed in plastic or metal as shown (upper steel, lower white strong & flexible)
Tie a strong 2mm elastic (available at any sport store) arround two pieces to hold all your Bank and Credit Cards.
This Card Wallet has a locking mechanism to avoid card falling simply by pulling the elastic.
A finger hole is available to push out the cards and a special fillet facilitates their insert.
Replace your traditional wallet by this secure card wallet.
Attach it to your ring keys or simply insert it into your pocket.
The ''ShapeTool Pico'' Multitool is a practical keychain accessory, useful for everyday tasks such as letter/cardboard box opening, cutting, nail removal/scraping and puncturing.
''Shapetool Pico'' specifications:
Length: 3,4 cm / Height: 1,8 cm / Width: 0,3 cm / Blade Length: 2,0 cm / Weight: 6gr
Available in several finishes and materials (Stainless Steel, Antique Bronze Matte, Antique Bronze Glossy, Gold Plated Matte, Gold Plated Glossy, Silver and Silver Glossy). Please choose from the right.
For safety reasons when carried in a pocket, a protective sheath is recommended and available here.
Note: The item you order may require cleaning of extra support material, polishing and sharpening. The item will be shipped unsharpened and the bladed side can be used as a scraper.
