Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.

This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!

NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small

Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !

Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.

Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.

Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later. +

If M.C. Escher had owned fidget toys, he would have worn "One ring to rule the ball" as a pendant. A single, continuous line contains a small ball that makes orbit after mesmerizing orbit but cannot escape, always held down in four directions. Available in solid, durable stainless steel with optional antique bronze and gold plated finishes to fit any context, "One ring to rule the ball" now also includes a free rubber necklace so that you can confuse your mind any time the fancy strikes you! One customer echoes many others in saying, "I couldn't put it down. This thing is just too fun!"

Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com

Beautifully designed Dragon Claw Bracelet. Inner circumference is 17 cm. Inner Diameter is approximately: 56mm Distance between claws is: 25.5 mm. Wearable on the forearm as well. Small version. Please contact for a custom size, also currently available in MEDIUM & LARGE. Please DO NOT try to bend open with metal prints to avoid any risk of injury! The metal will not bend, this is a strong, sturdy bracelet in metal. If these sizes will not fit you I will make a custom size no extra cost. ancienteyes@shaw.ca

A TARDIS earring for the fans of Doctor Who. Based on my 5cm miniatures also available here: http://www.shapeways.com/model/123277/dr_who_s_tardis__5_cm_.html
http://www.shapeways.com/model/189295/tardis__simple_.html?gid=ug31952

Comes with earring hook! Remember, this is only ONE item. If you want two earrings (assuming you have two ears!) then you will obviously need to order another...
***** PLEASE READ BELOW ****
With all kinds of problems printing in silver and the fact that the lettering seems to have disappeared on upload I am taking this out of sale and will have to do a complete revision.
If you would like to be notified when I have done this please email me at gslinger at rogers dot com.

Down
A cheery one in a family of quarks.

When one side goes down, the other looks up, so always cheerful :-)
Available in all metals and Strong and Flexible materials.

(Necklace not included)

Truncated Sphere D11 with 3-fold symmetry.

This die is inspired by the repulsion force polyhedra. Nonetheless, the underlying polyhedron (not rounded) is very different from the shape that can be obtained through this technique with 11 points repulsing each others.

Actually, I calculated the positions of 11 points to have a maximal radius for the circles resulting from the intersection of this underlying polyhedron with a sphere with the following constraints:
- 2 poles (upper and lower face - parallel to the horizontal plane)
- 3 points around each pole
- 3 remaining points corresponding to 3 faces perpendicular to the horizontal plane

The result is a truncated sphere with 11 circular faces of same radius.

It is numbered from 1 to 11: 2 numbers are on faces (poles), 6 between vertices and face and  3 on edges. The sum of the numbers on the 3 upper vertices surronding the North pole is 18.  Same thing for the sum of the 3 numbers on the lower vertices surronding the South pole and the sum of the 3 numbers on the edges of the equator.

This die is made of a shell of 1.5mm that contains support material to make it heavier. The engraved numbers have a 0.75 mm depth. They are quite big since they overlap the surrounding faces and thus should be very easy to read.

See this thread for more informations.

Available Truncated Sphere Dice: D4, D6, D8, D9, D10, D%, D11, D12, D14, D15, D16, D17, D18, D20, D24, D32, D33
Alternative shapes: alt D8, 3-fold D10 (rounded), 3-fold D10 (pointed), 4-fold D10, 5-folded D10 (pointed)
Coming soon: D22, D50
Related dice: Concave D4, Concave D6, D4 Shell, D8 Shell.

Available in every size between 12.5 and 22.5 mm (inside diameter).
Choose Silver Glossy for best result and most details.
Find your ringsize here:
findmyringsize.com
en.wikipedia.org/wiki/Ring_size

Know someone who's a 20? Keep a little (1.5 cm by 1 cm) photo of them inside this 20 sided die necklace. Comes in two parts. Pass your chord through the hole in the top half, through the loop inside the bottom half, and back out through the hole again. The loop is attached to a platform where you can glue picture.

A single die that emulates all the possible rolls of two six-sided dice. All 36 possible rolls are depicted on its 36 faces, using die-pip diagrams. It should be big enough to read, since it''s nice and roomy and hollow.

The pips are maybe a little too deep, but otherwise pretty good.