by
virtox
Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
by
fakebusker83
Version 4.0
A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.
It comes with 2 cannon/piledriver accessories.
You can also arm the Thugger with either Driller or Slammer accessories!
Radicon thread here.
Flickr gallery here.
A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.
It comes with 2 cannon/piledriver accessories.
You can also arm the Thugger with either Driller or Slammer accessories!
Radicon thread here.
Flickr gallery here.
by
fakebusker83
Version 1.6
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
by
fakebusker83
Version 1.5
A 5-pack of the hungriest pestilence found in the universe! Each scrapacius has a hinged jaw and ball-jointed neck joint. The legs are designed to grab onto 3mm diameter rods. Enjoys cuddling.
Each Scrapacius stands about 2cm tall.
This design is successfully tested in FUD and WSF. FUD is recommended to capture all the fine detail.
TFW2005 Radicon thread here.
A 5-pack of the hungriest pestilence found in the universe! Each scrapacius has a hinged jaw and ball-jointed neck joint. The legs are designed to grab onto 3mm diameter rods. Enjoys cuddling.
Each Scrapacius stands about 2cm tall.
This design is successfully tested in FUD and WSF. FUD is recommended to capture all the fine detail.
TFW2005 Radicon thread here.
by
fakebusker83
Version 3.0
"It's Seismus. The 'S' is silent."
Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.
There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.
Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.
This model is tested in White Strong Flexible.
Flickr gallery here.
TFW2005 thread here.
"It's Seismus. The 'S' is silent."
Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.
There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.
Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.
This model is tested in White Strong Flexible.
Flickr gallery here.
TFW2005 thread here.
by
coines23
The Xuvaxi investigator is a common scout and patrol ship, fast but lightly armed.
by
coines23
The Ngaksu Fury is a fast, aggressive scout ship.
by
coines23
A long-range fire support mecha. This 2-piece model is 2.8cm tall when assembled.
by
coines23
A long-range fire support mecha. This 2-piece model is 2.8cm tall when assembled.
by
coines23
A heavily armed and armored walker, designed for taking down large, fixed installations.
This 2 piece model is 3.6cm tall when assembled.
This 2 piece model is 3.6cm tall when assembled.
by
fakebusker83
Version 1.0
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
by
coines23
A combination heavy warship and troop transport.
by
fakebusker83
Version 1.0
A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!
You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!
A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!
You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!
by
chd
A 3d pixel rendering... Feedback appreciated
by
fakebusker83
Version 1.5
Edit: Thickened front spikes for greater endurance and strength.
A vicious, spiky hand cannon to arm your alien robotic ground troops with! Made to be as accurate to the movie footage as possible, this design contains hoses, armour plates and other features that cannot be easily replicated with conventional molding techniques.
Printing in Strong Flexible is recommended due to the amount of fine, fragile details.
This model is tested in WSF.
Edit: Thickened front spikes for greater endurance and strength.
A vicious, spiky hand cannon to arm your alien robotic ground troops with! Made to be as accurate to the movie footage as possible, this design contains hoses, armour plates and other features that cannot be easily replicated with conventional molding techniques.
Printing in Strong Flexible is recommended due to the amount of fine, fragile details.
This model is tested in WSF.
by
erich666
Proof that it's easy to make fabulously expensive models easily with Mineways: size matters. This one's scaled to print out in color, so really adds up in cost, even with the base being hollow.
That said, I didn't spend time making sure all the rooms inside the castle were filled in, so that they could be hollowed out later - I didn't think anyone would actually print this model out! Sarconix did, as a surprise. I suspect I could have saved maybe $20 by placing torches at room doorways and then using the "seal off entrances" option to fill the rooms (which would then get hollowed).
Model built by Sarconix in Vokselia, vokselia.com
by
coines23
The Martian Elite Republican Guard's finest frontline battlecruiser.
by
239CX5
This is a model of a Pirate ship that I made in minecraft. It has a space invaders flag :)
you can open and see inside it!
you can open and see inside it!
by
239CX5
This is a little cave church i made on a Minecraft server
by
Caffè_Macchiavelli
I tried to make a 25*25*25 chunk that represents the main features of the game. There's a house, some trees, a small pond & farm, basement storage and a whole bunch of caves and abandoned mine shafts. Also lava (what's a model without lava?).
by
7777773
Goliath
...Still working on making hollow models...
...Still working on making hollow models...
by
AotrsCommander
Sci-Soviets
The new Perun class "Tesla" Grav Tank is part of the new generation of weaponry, primarily brain-childed by Stanislav Tesla, a decendant of the famous Nikola Tesla, born in Russia on Earth. It is lighter armoured than most MBTs, being little heavier armoured thn many light battle tanks, but carries a considerable offensive punch from it's two tesla coils. It is considerably faster on it's grav-drives than the previous generation of tracked tanks, and serves to reinforce recon units of support T-150 Indrik MBTs. It carries a secondary particle beam turret for point-defence (the tesla coils themselves are effective on both infantry and armour).
All turrets in the sci-soviet range are interchangable.
Two models, approx (4.1 x 3.1 x 2.5mm)
Suggested material: SWF
The new Perun class "Tesla" Grav Tank is part of the new generation of weaponry, primarily brain-childed by Stanislav Tesla, a decendant of the famous Nikola Tesla, born in Russia on Earth. It is lighter armoured than most MBTs, being little heavier armoured thn many light battle tanks, but carries a considerable offensive punch from it's two tesla coils. It is considerably faster on it's grav-drives than the previous generation of tracked tanks, and serves to reinforce recon units of support T-150 Indrik MBTs. It carries a secondary particle beam turret for point-defence (the tesla coils themselves are effective on both infantry and armour).
All turrets in the sci-soviet range are interchangable.
Two models, approx (4.1 x 3.1 x 2.5mm)
Suggested material: SWF
by
AnachronGames
It is the age of the Anachron Legions - when war has torn civilization asunder, and new empires rise from the ashes, their mighty Legions wielding powerful and ancient weapons from before the fall of man in a new struggle for control of a shattered, desolate planet.
Some say the Greenskins are the mutant descendants of supersoldiers who fought for the Old Nations, before The Fall. Others say they were once normal men, now swollen and disfigured by radiation into hulking brutes.
When confronted by a Greenskin Walker though, all that matters is how fast you can run! Crude but heavily armed, these clanking beasts hunt in packs, their Greenskin drivers cackling gleefully as they mow down enemy infantry and rip armored vehicles to shreds in Close Combat.
Set comes with 6 Greenskin Walkers armed with twin Dakkaguns and Crushing Klaws.
by
Buckey407
The lost city of Horobus, from the Minecraft map Pharaoh's Curse 2 - Wrath of Horobus created by Kiwi_as
