by
VENERIDESIGN
Nuke Lamp it's is a unique table lamp, its complex surfaces were created using real fluid dynamics simulations.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com for shipping address.
Thank you.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com for shipping address.
Thank you.
by
fakebusker83
Version 1.5
A 5-pack of the hungriest pestilence found in the universe! Each scrapacius has a hinged jaw and ball-jointed neck joint. The legs are designed to grab onto 3mm diameter rods. Enjoys cuddling.
Each Scrapacius stands about 2cm tall.
This design is successfully tested in FUD and WSF. FUD is recommended to capture all the fine detail.
TFW2005 Radicon thread here.
A 5-pack of the hungriest pestilence found in the universe! Each scrapacius has a hinged jaw and ball-jointed neck joint. The legs are designed to grab onto 3mm diameter rods. Enjoys cuddling.
Each Scrapacius stands about 2cm tall.
This design is successfully tested in FUD and WSF. FUD is recommended to capture all the fine detail.
TFW2005 Radicon thread here.
by
fakebusker83
Version 1.5
This is a show accurate weapon set for TF: Prime Powerizer Dreadwing!
This set contains a Big Blaster, a sword and 2 bombs! Both blaster handles are movable for adaptability, and all handles are 5mm compatible pegs. The sword features a 3mm c-clip to attach to the blaster and a 5mm peg for storage in other locations.
At the side of the blaster there is an auxiliary 5mm peg for use in storage on the figure's back.
The blaster and sword measures 149 mm and 128 mm in length respectively.
This model has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr set here.
This is a show accurate weapon set for TF: Prime Powerizer Dreadwing!
This set contains a Big Blaster, a sword and 2 bombs! Both blaster handles are movable for adaptability, and all handles are 5mm compatible pegs. The sword features a 3mm c-clip to attach to the blaster and a 5mm peg for storage in other locations.
At the side of the blaster there is an auxiliary 5mm peg for use in storage on the figure's back.
The blaster and sword measures 149 mm and 128 mm in length respectively.
This model has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr set here.
by
lorddragonmaster
Version 4
This is a completely show accurate weapon for TF: Prime Voyager Optimus Prime. This is the legendary Star Saber, featured in season 2 of TF:Prime. Weild the power of the Primes with a weapon that towers over Optimus himself!
The sword and handle separate and will fit into the 5mm hands of any Transformer.
The blade measures 186 mm in length and is an imposing sight for any Decepticon.
This model has been successfully tested in WSF and FUD!
Please note the sword does not come in colour/or painted.
by
fakebusker83
Version 2.5
Note: This version is the non-ported set. It does not have peg holes on the back fillers.
This is an upgrade set for the TF: Prime RID deluxe Knockout figure! In this set you will receive a pair of shoulders, a pair of back fillers, 1 paralyzer spear, 1 cutting saw and 1 trephinator drill accessory.
The shoulders replace the original, and they can fit nicely in alt mode. The back fillers can be pegged onto the sides of the car to act as booster rockets for Knockout. Let's face it, a bot like him needs speed as well as looks.
The saw and drill accessories have 5mm peg handles and can be held in the figure's fists, or they can also be mounted straight into his forearms.
This set is successfully tested in White Strong Flexible.
For the ported version with extra 5mm peg holes, click here.
TFW2005.com thread here.
Note: This version is the non-ported set. It does not have peg holes on the back fillers.
This is an upgrade set for the TF: Prime RID deluxe Knockout figure! In this set you will receive a pair of shoulders, a pair of back fillers, 1 paralyzer spear, 1 cutting saw and 1 trephinator drill accessory.
The shoulders replace the original, and they can fit nicely in alt mode. The back fillers can be pegged onto the sides of the car to act as booster rockets for Knockout. Let's face it, a bot like him needs speed as well as looks.
The saw and drill accessories have 5mm peg handles and can be held in the figure's fists, or they can also be mounted straight into his forearms.
This set is successfully tested in White Strong Flexible.
For the ported version with extra 5mm peg holes, click here.
TFW2005.com thread here.
by
fakebusker83
A fusion cannon and blade replacement for the TF: Prime Powerizer Megatron figure! This set includes a fusion cannon and an forearm armour attachment with a fold-out blade.
All components need to be assembled, and the cannon is designed to accommodate an LED circuit.
For the "Dark Energon" variant, click here
This model has been successfully tested and recommended in White Strong Flexible material.
All components need to be assembled, and the cannon is designed to accommodate an LED circuit.
For the "Dark Energon" variant, click here
This model has been successfully tested and recommended in White Strong Flexible material.
by
fakebusker83
Version 1.5
This is a Minigun weapon accessory for TF: Prime Powerizer Skyquake!
Made to look accurate to its show appearance, this Minigun features movable rear and forward handles for maximum adaptability in posing, and the 8 barrels rotate as well!
At the side there is an auxiliary 5mm peg for use in storage on the figure's back.
The Minigun measures 126 mm in length.
This set also comes with 2 bombs.
This model has been successfully tested in White Strong and Flexible.
TFW2005.com thread here.
Flickr set here.
This is a Minigun weapon accessory for TF: Prime Powerizer Skyquake!
Made to look accurate to its show appearance, this Minigun features movable rear and forward handles for maximum adaptability in posing, and the 8 barrels rotate as well!
At the side there is an auxiliary 5mm peg for use in storage on the figure's back.
The Minigun measures 126 mm in length.
This set also comes with 2 bombs.
This model has been successfully tested in White Strong and Flexible.
TFW2005.com thread here.
Flickr set here.
by
fakebusker83
Version 1.5
This massive accessory measures 163 high, 112mm wide and 40mm in diameter for each hammer head. Some assembly is required.
The 5mm diameter handle can be used with most compatible hands.
The Etnarium has been successfully tested in White Strong Flexible.
This massive accessory measures 163 high, 112mm wide and 40mm in diameter for each hammer head. Some assembly is required.
The 5mm diameter handle can be used with most compatible hands.
The Etnarium has been successfully tested in White Strong Flexible.
by
schreerdesign
Everyone knows the coolest kids in high school were in band. And the coolest of the band kids? The tuba player. Well, after the kid who played the big drum. So second coolest. Now your iPhone can be the second coolest phone in school, and amplify tunes for you too! Please check out our iPhone cases on www.schreerdelights.com
by
schreerdesign
Remember when YouTube was contained in a giant walnut console, and it was only black and white? No? Well now you can experience it all in miniature with our little iPhone amplifier! Slip in your iPhone(4 or 4S only), and the acoustic funnel boosts the sound significantly - which then emerges from the Fab Fifties grille on the TV. Please see our great iPhone covers at schreerdelights.com.
by
Phayart
Size 18.19 (18.19 mm internal diameter)
USA size 8
British size Q
French size 57 3/4
German size 18
Japanese size 16
Swiss size 17 3/4
If you need a different size than "18.19 mm" just send me a message with your size and i''ll upload it.
