by
TheoJansen
The third public evolution of the Animaris Geneticus Parvus. #7 has evolved legs, with pointy feet instead of flat. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros".
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.
- The best way to push it is by its nameplate. Do not push down, but forward.
- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.
- The best way to push it is by its nameplate. Do not push down, but forward.
- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.
by
TheoJansen
[Note: This propeller propulsion add-on does not include a 3D printed Strandbeest, which should be bought seperately! This propeller does not fit the Ondula version!]
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
by
TerraCotta
If M.C. Escher had owned fidget toys, he would have worn "One ring to rule the ball" as a pendant. A single, continuous line contains a small ball that makes orbit after mesmerizing orbit but cannot escape, always held down in four directions. Available in solid, durable stainless steel with optional antique bronze and gold plated finishes to fit any context, "One ring to rule the ball" now also includes a free rubber necklace so that you can confuse your mind any time the fancy strikes you! One customer echoes many others in saying, "I couldn't put it down. This thing is just too fun!"
Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com
Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com
by
TheoJansen
The first public evolution of the Animaris Geneticus Parvus, #5. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros". The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet.
- The best way to push it is by its nameplate. Do not push down, but forward
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet.
- The best way to push it is by its nameplate. Do not push down, but forward
by
schreerdesign
(Note, prices reduced) This is a sound magnifier for your iPhone 4 or 4s (does not fit others), based on the old Gramophones of the late 19th and early 20th Centuries. NOTE: BASE AND HORN ARE NOW SOLD SEPARATELY FOR TECHNICAL REASON. THIS FILE IS THE BASE ONLY. SEE THIS LINK FOR THE HORN: http://shpws.me/5i0B . (Adding this to cart will add both)
+ 
Want to get a set?
+ 
by
boustalahit
This figurine is a fan art inspired by the great game "Day of the Tentacles" back in the nineties. This one is the nice and gentle green tentacle, who like to play guitar (but he doesn't have arms... HOW DOES HE DO ?)
I really recommand you the game if you find it somewhere (it's a collector now).
Please note that I don't do any markup on the price. I'd love your comment on your order too :)
by
peter@tenonedesign.com
Puzzle Case will set your iPhone apart from all the rest. Order this one-of-a-kind design with your choice of color for the top and bottom pieces.
This is the top piece. Be sure to also order at least one Puzzle Case Bottom piece.
http://www.shapeways.com/model/362223/puzzle_case_bottom.html
by
jeff
The apple came from a tree and thus a reunion is made on the back of your iPad 2.
Other patterns available are Hexastar, Cubed, and Grid
A custom pattern to make the backside of your iPad 2 a bit more interesting. The iPad 2 Wrap literally wraps itself around each corner of your iPad, giving the corners & surfaces secure protection. The inherent texture of the 3D printed plastic provides increased grip while also being an extremely strong and durable material. The Apple Smart Cover protects the iPad front well, but leaves the back vulnerable to dirt and scratches. The wrap is the perfect compliment to the Smart Cover and the two work together flawlessly. Check out the video for fit & function.
Works only with iPad 2
The black finish is only recommended for use with the black Smart Cover (or no Smart Cover) as its dye can eventually rub off onto the cover.
If you have questions or comments about the design or would like to inquire about custom patterns to personalize it or for branding purposes please contact the designer, Jeff Bare, here.
Other patterns available are Hexastar, Cubed, and Grid
A custom pattern to make the backside of your iPad 2 a bit more interesting. The iPad 2 Wrap literally wraps itself around each corner of your iPad, giving the corners & surfaces secure protection. The inherent texture of the 3D printed plastic provides increased grip while also being an extremely strong and durable material. The Apple Smart Cover protects the iPad front well, but leaves the back vulnerable to dirt and scratches. The wrap is the perfect compliment to the Smart Cover and the two work together flawlessly. Check out the video for fit & function.
Works only with iPad 2
The black finish is only recommended for use with the black Smart Cover (or no Smart Cover) as its dye can eventually rub off onto the cover.
If you have questions or comments about the design or would like to inquire about custom patterns to personalize it or for branding purposes please contact the designer, Jeff Bare, here.
by
jeff
The apple came from a tree and thus a reunion is made on the back of your iPad 2.
Other patterns available are Hexastar, Cubed, and Grid
A custom pattern to make the backside of your iPad 2 a bit more interesting. The iPad 2 Wrap literally wraps itself around each corner of your iPad, giving the corners & surfaces secure protection. The inherent texture of the 3D printed plastic provides increased grip while also being an extremely strong and durable material. The Apple Smart Cover protects the iPad front well, but leaves the back vulnerable to dirt and scratches. The wrap is the perfect compliment to the Smart Cover and the two work together flawlessly. Check out the video for fit & function.
Works only with iPad 2
The black finish is only recommended for use with the black Smart Cover (or no Smart Cover) as its dye can eventually rub off onto the cover.
If you have questions or comments about the design or would like to inquire about custom patterns to personalize it or for branding purposes please contact the designer, Jeff Bare, here.
Other patterns available are Hexastar, Cubed, and Grid
A custom pattern to make the backside of your iPad 2 a bit more interesting. The iPad 2 Wrap literally wraps itself around each corner of your iPad, giving the corners & surfaces secure protection. The inherent texture of the 3D printed plastic provides increased grip while also being an extremely strong and durable material. The Apple Smart Cover protects the iPad front well, but leaves the back vulnerable to dirt and scratches. The wrap is the perfect compliment to the Smart Cover and the two work together flawlessly. Check out the video for fit & function.
Works only with iPad 2
The black finish is only recommended for use with the black Smart Cover (or no Smart Cover) as its dye can eventually rub off onto the cover.
If you have questions or comments about the design or would like to inquire about custom patterns to personalize it or for branding purposes please contact the designer, Jeff Bare, here.
by
moloko
The perfect stand for iPad is more than it reveals at a first glance: by adding your original dock-cable it becomes an elegant yet durable docking station.
It is a convenient stand for facetime sessions in portrait mode, or for watching movies in landscape mode.
Laying your iPad down on this stand gives you a nice beveled position to write on.
You can even use this stand to hang your iPad on a wall.
The perfect stand is surprisingly lightweight but incredibly robust. Just throw it in your bag and take it anywhere -it won't break!
If you choose to order one of the lighter colors and it gets a little dirty over time - just put it in your dishwasher and it will look like new!
When choosing White Strong & Flexible, we highly recommend to rinse the product with tab water thoroughly before first use. This will remove all excess material left on the surface from the printing process. Let your product dry before using it with your iPad! All other materials do not need to be cleaned.
(iPad 3 compatible version coming soon)
It is a convenient stand for facetime sessions in portrait mode, or for watching movies in landscape mode.
Laying your iPad down on this stand gives you a nice beveled position to write on.
You can even use this stand to hang your iPad on a wall.
The perfect stand is surprisingly lightweight but incredibly robust. Just throw it in your bag and take it anywhere -it won't break!
If you choose to order one of the lighter colors and it gets a little dirty over time - just put it in your dishwasher and it will look like new!
When choosing White Strong & Flexible, we highly recommend to rinse the product with tab water thoroughly before first use. This will remove all excess material left on the surface from the printing process. Let your product dry before using it with your iPad! All other materials do not need to be cleaned.
(iPad 3 compatible version coming soon)
