by
curvecreative
Nanolet
Everyone's wearing their Nano on their wrist nowadays, now you can wear it on a one part 3D printed nano bracelet.
The NANOLET simply wraps around your wrist and fits snugly up to your hand which is perfect for running and everyday use. An alternative to the plethora of nano watches that are around now.
Featured on: Mashable , Cult of Mac , Yanko Design and many more.
Suitable for medium sized wrists. Available in a range of colors
Medium is for a wrist of circumference 165mm - 185mm. The best way to measure your wrist is to wrap a piece of string around your wrist, mark it and then measure it. Maximum wrist size is 190mm.
Unboxing Video here
Click here for OTHER SIZES
Click here to visit our site
Or click here to keep up to date on Facebook
Interested in buying Nanolets in BULK at reduced price? For LARGE , MEDIUM and SMALL
by
dadrummond
A perfect scarab with all the little details. What an Egyptian metalsmith would have crafted, had the pharoahs dreamed of direct-metal printing.
Featured on BoingBoing, NotCot, and entymologically discerning sterna worldwide.
To wear as a pendant, a simple 2mm-thick cord works well.
Featured on BoingBoing, NotCot, and entymologically discerning sterna worldwide.
To wear as a pendant, a simple 2mm-thick cord works well.
by
fakebusker83
Just added: a photo of an awesome leader Starscream custom using these hands, done by my good friend Encline!
Note: I have tested these hands in both Strong Flexible and Detail material, and I conclude SF is the better alternative as it is much hardier and is able to stand up to the wear and tear of the joints. Detail material is disappointingly unable to do so, and the joints are too loose for comfort. For better surface detail, I highly recommend ordering the hands in White Strong Flexible Polished!
A pair of posable hands for the Revenge of the Fallen Leader Starscream figure!
Each order comes with 2 hands with interchangeable core, giving customizers the freedom to mount the core with a 5mm socket to allow arming of compatible weapons, or the lack of a socket for an aesthetically pleasing appearance.
Each hand possesses 3 posable fingers on ball-joints, bending in 2 places, and 2 thumbs also mounted on ball joints.
The wrist too, is on a ball joint, allowing for dynamic poses on a already awesome figure.
Due to the nature of the installation, this model is for experienced customizers only. You need a dremel, cutting knife and a strong epoxy sculpt. These are for removing the existing hands and installing the wrist ball-joints in their place.
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
Note: I have tested these hands in both Strong Flexible and Detail material, and I conclude SF is the better alternative as it is much hardier and is able to stand up to the wear and tear of the joints. Detail material is disappointingly unable to do so, and the joints are too loose for comfort. For better surface detail, I highly recommend ordering the hands in White Strong Flexible Polished!
A pair of posable hands for the Revenge of the Fallen Leader Starscream figure!
Each order comes with 2 hands with interchangeable core, giving customizers the freedom to mount the core with a 5mm socket to allow arming of compatible weapons, or the lack of a socket for an aesthetically pleasing appearance.
Each hand possesses 3 posable fingers on ball-joints, bending in 2 places, and 2 thumbs also mounted on ball joints.
The wrist too, is on a ball joint, allowing for dynamic poses on a already awesome figure.
Due to the nature of the installation, this model is for experienced customizers only. You need a dremel, cutting knife and a strong epoxy sculpt. These are for removing the existing hands and installing the wrist ball-joints in their place.
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
by
fakebusker83
Version 2.0
A pair of posable hands for the Dark of the Moon Leader class Ironhide figure! Each finger is double-jointed, the wrists and thumbs are also ball-jointed, and the hands still fit behind the windscreen in his alt mode!
Not for casual collectors. You will need a dremel and some skill to install these hands.
I recommend these to be printed in Strong Flexible material for maximum reliability.
Radicon thread here. (With installation instructions)
Flickr gallery here.
A pair of posable hands for the Dark of the Moon Leader class Ironhide figure! Each finger is double-jointed, the wrists and thumbs are also ball-jointed, and the hands still fit behind the windscreen in his alt mode!
Not for casual collectors. You will need a dremel and some skill to install these hands.
I recommend these to be printed in Strong Flexible material for maximum reliability.
Radicon thread here. (With installation instructions)
Flickr gallery here.
by
fakebusker83
Version 1.5
A pair of posable hands for use with the ROTF leader Optimus Prime figure! The wrists, thumbs and all fingers are ball-jointed. Additionally, the back of each hand unfolds to form a deadly knuckle duster!
This design is recommended in Strong Flexible material.
TFW Radicon thread here.
Flickr gallery here.
A pair of posable hands for use with the ROTF leader Optimus Prime figure! The wrists, thumbs and all fingers are ball-jointed. Additionally, the back of each hand unfolds to form a deadly knuckle duster!
This design is recommended in Strong Flexible material.
TFW Radicon thread here.
Flickr gallery here.
by
fakebusker83
Version 1.6: Fixed thin wall issue on missile fins.
This is a set to upgrade the Transformers Prime deluxe (FE) Starscream figure! It contains a blaster, 2 triple missile launchers, 2 single missile launchers, 2 knee spikes, and 1 head spike.
You can find installation instructions at my TFW2005.com thread.
This is a set to upgrade the Transformers Prime deluxe (FE) Starscream figure! It contains a blaster, 2 triple missile launchers, 2 single missile launchers, 2 knee spikes, and 1 head spike.
You can find installation instructions at my TFW2005.com thread.
by
fakebusker83
In response to requests from friends and supporters, I did a revised version of my posable hands for the DOTM leader Sentinel Prime figure, this time to be much more movie accurate and with even more detail!
Each hand is articulated at the wrist with a ball joint. The fingers each are double jointed, and even the thumbs are on ball joints. The leader's hands are big enough for me to design it such that it can hold weapons without relying on the tension of the finger joints, so you can pose them in many different ways, with many different weapons. Transformation is very much possible, I made sure of that (yay!). Just make sure the fingers are arranged properly, kinda similar to how the original fingers were. IssuesThe test sample has a loose wrist ball-joint. This issue is not fixed as I used the same measurements as my other hands. Those hands came out with tight joints so it beats me why this sample was loose. Use super glue to tighten if necessary. As the joints are all designed to be sturdy and the pieces are kinda chunky, I will not recommend ordering them in Detail material or Frosted Ultra Detail material as they will most likely break under that pressure. However, I still will make these materials available for those who are picky about their surface detail. Buyer beware!
TFW2005 thread here. (Includes assembly instructions)
Flickr gallery here.
Each hand is articulated at the wrist with a ball joint. The fingers each are double jointed, and even the thumbs are on ball joints. The leader's hands are big enough for me to design it such that it can hold weapons without relying on the tension of the finger joints, so you can pose them in many different ways, with many different weapons. Transformation is very much possible, I made sure of that (yay!). Just make sure the fingers are arranged properly, kinda similar to how the original fingers were. IssuesThe test sample has a loose wrist ball-joint. This issue is not fixed as I used the same measurements as my other hands. Those hands came out with tight joints so it beats me why this sample was loose. Use super glue to tighten if necessary. As the joints are all designed to be sturdy and the pieces are kinda chunky, I will not recommend ordering them in Detail material or Frosted Ultra Detail material as they will most likely break under that pressure. However, I still will make these materials available for those who are picky about their surface detail. Buyer beware!
TFW2005 thread here. (Includes assembly instructions)
Flickr gallery here.
by
grigr
grigorusha Elemental Cube - world's smallest Rubik's Cube 8mm
world's smallest Rubik's Cube - for sale
its full functionaly Rubik's cube in small size (8mm)
forum link - http://www.twistypuzzles.com/forum/viewtopic.php?f=15&t=21839
youtube review video - http://www.youtube.com/watch?v=Q0UN50FLwtc
My puzzle Ten Cube world's smallest Rubik's Cube 10mm (same as Microbic Rubik's Cube 12mm) got into the Guinness Book! and I'm absolutely nothing to do did not do;)
http://www.guinessworldrecords.com/Search/Details/Smallest-Rubik's-Cube/74256.htm
very interesting: 8*8 mm cube placed in a 08/08 day
how to assemble this Cube:
http://www.shapeways.com/forum/index.php?t=msg&goto=33589
world's smallest Rubik's Cube - for sale
its full functionaly Rubik's cube in small size (8mm)
forum link - http://www.twistypuzzles.com/forum/viewtopic.php?f=15&t=21839
youtube review video - http://www.youtube.com/watch?v=Q0UN50FLwtc
My puzzle Ten Cube world's smallest Rubik's Cube 10mm (same as Microbic Rubik's Cube 12mm) got into the Guinness Book! and I'm absolutely nothing to do did not do;)
http://www.guinessworldrecords.com/Search/Details/Smallest-Rubik's-Cube/74256.htm
very interesting: 8*8 mm cube placed in a 08/08 day
how to assemble this Cube:
http://www.shapeways.com/forum/index.php?t=msg&goto=33589
by
fakebusker83
Version 2.0
A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.
The blades contain sharp edges and small parts, not suitable for children.
The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.
Click here to order only the blasters.
A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.
The blades contain sharp edges and small parts, not suitable for children.
The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.
Click here to order only the blasters.
by
fakebusker83
Version 1.6
A pair of blasters for Transformers Prime deluxe Arcee figure. They are specially designed to be mounted on her forearm 5mm peg sockets, and they have an additional socket for her blade weapons to be mounted underneath.
Also, they can be mounted on the side of her bike mode by using the same attachment to the blades.
Printing in Detail material is recommended.
A pair of blasters for Transformers Prime deluxe Arcee figure. They are specially designed to be mounted on her forearm 5mm peg sockets, and they have an additional socket for her blade weapons to be mounted underneath.
Also, they can be mounted on the side of her bike mode by using the same attachment to the blades.
Printing in Detail material is recommended.
by
fakebusker83
Version 2.0
Yup, here's my first offering for upgrading your DOTM figures! There has been many awesome customs of Sentinel Prime lately, and you'll only need a couple of expressive, posable fists to make them complete!
Yup, here's my first offering for upgrading your DOTM figures! There has been many awesome customs of Sentinel Prime lately, and you'll only need a couple of expressive, posable fists to make them complete!
by
extrudedqwerty
Master Sword stylus for nintendo ds. Unfortunately, you cannot take the sword out of the sheath. This is done in order to keep your screen safe and fingers comfortable.
by
fakebusker83
Version 1.5
Edit: Tightened hand peg. Hopefully it fits voyager Megatron better now.
A weapon accessory for the Dark of the Moon voyager Megatron figure! The handle is a 5mm peg modified to fit into his hands.
Includes 2 auxiliary pegs on the side for storage purposes.
A larger version can be found here.
This model is tested in WSF.
Edit: Tightened hand peg. Hopefully it fits voyager Megatron better now.
A weapon accessory for the Dark of the Moon voyager Megatron figure! The handle is a 5mm peg modified to fit into his hands.
Includes 2 auxiliary pegs on the side for storage purposes.
A larger version can be found here.
This model is tested in WSF.
by
fakebusker83
Version 1.5
A pair of claw weapons for the HFTD Tomahawk figure! This design is inspired by the appearance of the Wrecker Whirl in the IDW comics, and are meant to emulate his 4 fingered claw design.
Each finger-claw has 2 ball joints and are mounted on a wrist section which can rotate 360d as well.
Because of the fist-sheath that is supposed to hide the original hands of the figure, these claws are not suitable for all figures. As a rough guideline, the width of the figure's forearm should be equal to or narrower than 12mm. Also, the figure should be able to hold a 5mm peg handle.
A pair of claw weapons for the HFTD Tomahawk figure! This design is inspired by the appearance of the Wrecker Whirl in the IDW comics, and are meant to emulate his 4 fingered claw design.
Each finger-claw has 2 ball joints and are mounted on a wrist section which can rotate 360d as well.
Because of the fist-sheath that is supposed to hide the original hands of the figure, these claws are not suitable for all figures. As a rough guideline, the width of the figure's forearm should be equal to or narrower than 12mm. Also, the figure should be able to hold a 5mm peg handle.
by
fakebusker83
Version 1.0
Here I present the weapon set for DOTM deluxe Starscream! I was actually in my head for a couple of days thinking of a satisfying, involving way of portraying Starscream's weapons in bot mode, yet a tidy way of keeping them in jet mode.
Here I present the weapon set for DOTM deluxe Starscream! I was actually in my head for a couple of days thinking of a satisfying, involving way of portraying Starscream's weapons in bot mode, yet a tidy way of keeping them in jet mode.
by
fakebusker83
Version 2.0
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
This variant of the original uses the peg system to enable the blades to rotate, at a slight cost of visual accuracy.
Also like the original, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
This variant of the original uses the peg system to enable the blades to rotate, at a slight cost of visual accuracy.
Also like the original, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
by
fakebusker83
Version 2.5
A design for DOTM Megatron's right hand built to be used for DOTM leader Sentinel Prime figure! This hand design is made famous by Limewire's custom leader class DOTM Megatron and is now made available to you!
A design for DOTM Megatron's right hand built to be used for DOTM leader Sentinel Prime figure! This hand design is made famous by Limewire's custom leader class DOTM Megatron and is now made available to you!
by
fakebusker83
A pair of wrists, hands and add-on accessories for the ROTF voyager Starscream figure! Every finger is posable on ball joints, and the wrists are double-jointed for maximum posability!
These hands can collapse neatly in jet mode for a more satisfying, streamlined appearance. Additionally, the add-on weapons can be mounted on the underwing hardpoints. There are so many ways to customise this set!
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
These hands can collapse neatly in jet mode for a more satisfying, streamlined appearance. Additionally, the add-on weapons can be mounted on the underwing hardpoints. There are so many ways to customise this set!
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
by
fakebusker83
A design for DOTM Megatron's right hand built to be used for DOTM leader Sentinel Prime figure! This hand design is made famous by Limewire's custom leader class DOTM Megatron and is now made available to you! Note: This design contains only his right hand.
by
TreadshotA1
A custom set of null rays, ~7.5 cm long, in robot mode reaches down to robot's knees.
Rays are based on MP version, and are shorter than the Classics' original ones by 1.5 cm.
by
fakebusker83
Version 2.0
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
Of course, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
Of course, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
by
process
A sword inspired by G2 Laser Optimus Prime's (1995).
Fits any 5mm fist hole.
Fits any 5mm fist hole.
by
process
An accessory set for PCC Heavytread. Includes an articulated mine plow, 3mm post adapter, missile pod, and pistol inspired by G1 Brawl.
by
fakebusker83
Version 1.5
Edit: I've added spare finger pieces in case any of your fingerjoints break during assembly. This happens when you are printing in Frosted Ultra Detail.
A pair of posable hands for the Masterpiece Seeker figure! This is compatible with MP-3 Starscream and all his subsequent repaints. Each hand has a wrist ball joint, thumb ball joints, and 4 individual posable fingers!
This model has been tested successfully with White Strong Flexible and Frosted Ultra Detail. FUD fingers have a 25% chance of breaking so please be careful during assembly.
Pegged wrist variant here.
Edit: I've added spare finger pieces in case any of your fingerjoints break during assembly. This happens when you are printing in Frosted Ultra Detail.
A pair of posable hands for the Masterpiece Seeker figure! This is compatible with MP-3 Starscream and all his subsequent repaints. Each hand has a wrist ball joint, thumb ball joints, and 4 individual posable fingers!
This model has been tested successfully with White Strong Flexible and Frosted Ultra Detail. FUD fingers have a 25% chance of breaking so please be careful during assembly.
Pegged wrist variant here.
by
Tom.B
My most popular model! A medium sized blaster for all your DX and Voyager Transformers.
by
BigHache
Smoke stacks to replace the rubber ones in the Leader Class Optimus Prime figures. Simply remove the rubber ones and insert these.
Note: please make sure that you've done any painting/effects to these before install. The Strong & Flexible material won't take several installs and removals. I've opened up additional materials, however, please be aware that only WSF has been tested.
Note: please make sure that you've done any painting/effects to these before install. The Strong & Flexible material won't take several installs and removals. I've opened up additional materials, however, please be aware that only WSF has been tested.
