by
nervoussystem
this piece is size MEDIUM
size LARGE also available
not sure which size you need? check out our sizing chart
An intricate, organic cuff from our Cell Cycle collection which was inspired by cellular forms. The C-shaped, flexible design fits close to the skin, is light-weight, and uses minimal material. The final product is built up layer by layer in durable nylon plastic using Selective Laser Sintering, a kind of 3D printing. Nylon is quite comfortable to wear because it is lightweight and flexible.
The design was formed in a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure. In our work, we start with a natural inspiration and translate that into interactive software which we can use to generate an infinite variety of forms and patterns.
size LARGE also available
not sure which size you need? check out our sizing chart
An intricate, organic cuff from our Cell Cycle collection which was inspired by cellular forms. The C-shaped, flexible design fits close to the skin, is light-weight, and uses minimal material. The final product is built up layer by layer in durable nylon plastic using Selective Laser Sintering, a kind of 3D printing. Nylon is quite comfortable to wear because it is lightweight and flexible.
The design was formed in a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure. In our work, we start with a natural inspiration and translate that into interactive software which we can use to generate an infinite variety of forms and patterns.
by
Whystler
The nocturnal (or nocturlabe) is a very old instrument for telling time at night by measuring the stars. While concept is ancient, this design is all original. It is fully functional (all dials move properly) and meant to be worn as a pendant. This is now available for sale, as it has been tested and works nicely.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
by
harryapeman
UPDATE: Click this link to see the new version with loops for easy addition of a necklace chain! *Chain NOT included*
Makes a great Valentine's Day gift!!
They balance nicely on the top to fingers. With some dexterity they can also be fashioned into a necklace.
Makes a great Valentine's Day gift!!
They balance nicely on the top to fingers. With some dexterity they can also be fashioned into a necklace.
by
ThreeForm
The Lotus top is a graceful form that embraces the upper body, accentuating the shoulders and clavicles. It's name comes from its unique design that blooms at the center opening, allowing the wearer to put her head through and rest it comfortably on the neck and shoulders.
A perfect fit requires a 3D body scan. Email Contact (at) ThreeFormFashion.com for more information on full service scanning and fitting.
A perfect fit requires a 3D body scan. Email Contact (at) ThreeFormFashion.com for more information on full service scanning and fitting.
by
SheilaMunro
Beautifully designed Dragon Claw Bracelet by: Sheila Munro. Inner circumference measurement is 19.5 cm. Inner Diameter is approximately: 65mm Distance between claws is: 32 mm. Wearable on the forearm as well. Medium version. Please contact for a custom size, also currently available in SMALL & LARGE. Please DO NOT try to bend open with metal prints to avoid any risk of injury! The metal will not bend, this is a strong, sturdy bracelet in metal. If these sizes will not fit you I will make a custom size no extra cost. ancienteyes@shaw.ca
by
DarioScapittaDesign
SPARKLING Necklace is a part of an entire collection including armband and ring. Realized in polyamide using 3D print technology is available in different colours and size. Inspired by sparkling bubbles like Champagne or Prosecco wine, is an elegant and delicate decoration for your body.
The necklace is also available in different size. www.darioscapittadesign.com
by
AyameDeude
You don't have to catch 'em all, only the one you really care about.
Inspired by a touching proposal shared on the internet, this openable pokeball is just large enough to hold a ring or two. There is also an embossed line of text reading "I Choose You" inside of the lower half of the Pokeball.
Due to this model's recent success, I have decided to open up the available materials to the remaining Strong and Flexible colors as well as the metals.
Congratulations to all of the happy couples!
The Pokeball Ring Box sizes in at 4cm in diameter and opens in two pieces. Currently, this pokeball does not come pre-colored and will need to be painted or colored in some manner. This was decided due to sandstone (the only medium able to be pre-colored) may scratch and scuff anything inside of the Pokeball.
Inspired by a touching proposal shared on the internet, this openable pokeball is just large enough to hold a ring or two. There is also an embossed line of text reading "I Choose You" inside of the lower half of the Pokeball.
Due to this model's recent success, I have decided to open up the available materials to the remaining Strong and Flexible colors as well as the metals.
Congratulations to all of the happy couples!
The Pokeball Ring Box sizes in at 4cm in diameter and opens in two pieces. Currently, this pokeball does not come pre-colored and will need to be painted or colored in some manner. This was decided due to sandstone (the only medium able to be pre-colored) may scratch and scuff anything inside of the Pokeball.
by
SemajNamssiw
A smaller version of the DNA Earring.
You should receive two earrings if this model is ordered. I have not tested this myself. Let me know if it works correctly! Note that earring hooks ARE included.
You should receive two earrings if this model is ordered. I have not tested this myself. Let me know if it works correctly! Note that earring hooks ARE included.
by
DarioScapittaDesign
BLACK ROSE Armband is a part of an entire jewellery set in polyamide material. The collection includes necklace, ring and earrings available in different size and colours.
Wearing those objects it is like to have just drawed roses up on your skin. The rose's silhouette is able to decorate the body with a touch of glamour; a very classic style reinvented with a chic and modern style.
The BLACK ROSE armband is also available in 3 different size SMALL, MEDIUM and LARGE. www.darioscapittadesign.com
by
mdavisstudios
**This listing is for both the left and right anatomical inner ears.**
Pictured above are the lovely results in both sterling silver (shown polished) and stainless steel. Results have also been wonderful in any of the bronze/gold coatings.
This unique pendant or earring set is an anatomically correct model of the inner ear, modeled and 3D printed at actual life-size.
The inner ear, a tiny bony apparatus in the skull, is responsible for our sense of balance and hearing, and makes a great one-of-a-kind gift for someone in acoustics, audiology, or music.
Dimensions: 2 cm. in length
**Comes with both the left and right anatomical inner ears
Order through Etsy to get 18" dark silver chain, or strung on actual earrings, and gift packaging: http://www.etsy.com/shop/mdavisstudios
Thanks for looking!
Pictured above are the lovely results in both sterling silver (shown polished) and stainless steel. Results have also been wonderful in any of the bronze/gold coatings.
This unique pendant or earring set is an anatomically correct model of the inner ear, modeled and 3D printed at actual life-size.
The inner ear, a tiny bony apparatus in the skull, is responsible for our sense of balance and hearing, and makes a great one-of-a-kind gift for someone in acoustics, audiology, or music.
Dimensions: 2 cm. in length
**Comes with both the left and right anatomical inner ears
Order through Etsy to get 18" dark silver chain, or strung on actual earrings, and gift packaging: http://www.etsy.com/shop/mdavisstudios
Thanks for looking!
by
AngelaEstenson
“Flamenco Nouveau” pin is inspired by a classic art nouveau hair pin, but given a more contemporary look. It suggests the shape of the “Clavel” (Carnation flower) that is fundamental in the aesthetic of Spanish flamenco dancing and culture.
It is recommended as a decoration for the hair, not as a hair holder. Whenever you have your hair gracefully done up as you like it, you can give the final touch of “Flamenco Nouveau” by adding one or two pins to your hair do. Then, you will look at your self and say “ OLÉ !”
