Version 4.0

A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.

It comes with 2 cannon/piledriver accessories.

You can also arm the Thugger with either Driller or Slammer accessories!

Radicon thread here.
Flickr gallery here.

Version 1.6

A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.

Radicon thread here.
Flickr thread here.

Version 4.5: Edited for peg locks to be sturdier.

Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!

This version is successfully tested on WSF and FUD.

Radicon thread here
Flickr gallery here.

Version 1.6

A pair of blasters for Transformers Prime deluxe Arcee figure. They are specially designed to be mounted on her forearm 5mm peg sockets, and they have an additional socket for her blade weapons to be mounted underneath.

Also, they can be mounted on the side of her bike mode by using the same attachment to the blades.

Printing in Detail material is recommended.

Version 1.5
Edit: Tightened hand peg. Hopefully it fits voyager Megatron better now.

A weapon accessory for the Dark of the Moon voyager Megatron figure! The handle is a 5mm peg modified to fit into his hands.
Includes 2 auxiliary pegs on the side for storage purposes.

A larger version can be found here.

This model is tested in WSF.

Version 1.5

A pair of claw weapons for the HFTD Tomahawk figure! This design is inspired by the appearance of the Wrecker Whirl in the IDW comics, and are meant to emulate his 4 fingered claw design.

Each finger-claw has 2 ball joints and are mounted on a wrist section which can rotate 360d as well.

Because of the fist-sheath that is supposed to hide the original hands of the figure, these claws are not suitable for all figures. As a rough guideline, the width of the figure's forearm should be equal to or narrower than 12mm. Also, the figure should be able to hold a 5mm peg handle.

 BadBabeBot head for Transformers deluxe Terradive figure.

Both Targetmasters together, one with a double-barreled shotgun and the other with a chainsaw

They look nice in both WSF and Black Detail, although the detail material will need a little sanding on the ball joints(and maybe a little warming of the plastic) to connect the parts. The 5mm pegs work quite well in a huge range of Transformers brand figures.

Version 1.0

A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!

You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!

---Update, Small parts have been added to a runner so the gun can now be made in Black Strong Flexible---A space aged Magnum pistol for your DX or Voyager Transformers. When assembled the pistol can open for reloading (see images).

Version 2.0

A custom femme head for the HFTD Terradive mold! Be sure to order it in Frosted Ultra Detail to take full advantage of the light piping!

Transformers Wrecker Ironfist. Specifically designed to fit the DOTM Deluxe Ratchet figure. I highly recommend getting one of the detail prints. This one comes with NO bullet hole.

A G1 Kickback-style blaster for your Fansproject's Backfiery. Includes 2 peg sizes, a 5mm for your Hasbro Transformers, and a 4mm for your Fansprojects figures.

Version 1.5 This blaster is an enlarged version of the one included in the voyager Sentinel Prime weapon set, this time sized to fit the leader class Sentinel Prime figure!

Includes a 3mm c-clip to allow storage on Sentinel's many 3mm railings.

This model is untested.

A Transformers sized Plasma Cutter! Based on the Dead Space 2 design. For use with any DX transformer that needs to cut the arms and legs off some kind of horrible living nightmare!

My most popular model! A medium sized blaster for all your DX and Voyager Transformers.

A G1 Shrapnel-style blaster for your Fansproject's Thundershred. Includes 2 peg sizes, a 5mm for your Hasbro Transformers, and a 4mm for your Fansprojects figures.

This is my second version of the blade add on kit for Arcee. This time you only need to make one order to get two blades.

--Blockhead's guns are here: http://www.shapeways.com/model/618627/blockhead-s-guns.html ---A custom legion class size figure. A little off-road a little muscle-car, Block head my not be the smartest bot around but there's no one better suited to get the word out to troops in remote locations.

----Parts A contais parts for the gun, see also Part B. You will need to order both part A and B for a complete model.-----A small side arm weapon that converts into a knife for your DX transformer figures.

A attachment set with a jackhammer, grabbing claw and wrecking ball attachment for the Reveal the Shield Solar Storm Grappel figure.

This model is untested.

---Before purchasing please understand this kit will take a lot of time and patients to assemble. It will require a great deal of sanding and fitting, its a beast---Version 2.0, the tripod has been removed, it was useless--- The name might be farfetched, but this cannon is too. A massive heavy weapon for your DX and Voyager sized figures. When the reactor shields are opened the centrifuge can spin on a axle.

This large cannon was designed as an upgrade for the HA Thunderhead. It is designed to mount in his turret. It is equiped with a 5mm peg which allows it to be a hand held rifle for other transformer figures as wel.

A two headed flail for transformers figures.

A two headed flail for transformers figures.

A two headed flail for transformers figures.