by
fakebusker83
Version 1.0
This is a pair of articulated hands for the FOC voyager Soundwave figure! Every digit is articulated and the thumb is on a ball joint. The hands have a wrist swivel joint and is designed to easily replace the originals.
This design is modified from the previously designed 14mm posable fists, and functions similarly. These hands will fit the FOC Soundblaster and FOC Blaster figures as well.
This model has not been tested. Strong Flexible material is recommended.
This is a pair of articulated hands for the FOC voyager Soundwave figure! Every digit is articulated and the thumb is on a ball joint. The hands have a wrist swivel joint and is designed to easily replace the originals.
This design is modified from the previously designed 14mm posable fists, and functions similarly. These hands will fit the FOC Soundblaster and FOC Blaster figures as well.
This model has not been tested. Strong Flexible material is recommended.
by
Tom.B
---Still in testing, Currently working out some bugs---Design revisions pending---A custom target sidekick for your TF figures. Transforms from Bot to Gun battery.
by
fakebusker83
Version 1.0
A compact variant of the Quadricore Explodator, the Implodators are most suitable for mounting on vehicular forms and for smaller figures. They make great auxiliary weapons! They are held by the use of a 5mm peg, and each one has a 3mm rail on its side.
This set consists of a mirrored pair of Implodators. Each one is 3 cm long.
This model is tested successfully on White Strong Flexible.
A compact variant of the Quadricore Explodator, the Implodators are most suitable for mounting on vehicular forms and for smaller figures. They make great auxiliary weapons! They are held by the use of a 5mm peg, and each one has a 3mm rail on its side.
This set consists of a mirrored pair of Implodators. Each one is 3 cm long.
This model is tested successfully on White Strong Flexible.
by
sevensheaven
The classic old school Koopa character from the NES version of the Super Mario Brothers game, carefully translated to 3D pixels.
This is a separately orderable part from the Mariorama sculpture, which can also be found in the Sevensheaven 3D Print Store.
This is a separately orderable part from the Mariorama sculpture, which can also be found in the Sevensheaven 3D Print Store.
by
TecromDesigns
Above is a picture of the Tempest blaster, printed in the "Frosted Ultra Detail" material from Shapeways and an artist's paint application on the model. The Blasters have a 5mm peg/grip which should allow most figures that utilize this grip measurement to securely hold the model. In addition, I've included an image of RID Transformers Prime Arcee with a Tempest head add-on it (sold separately) to illustrate how a figure might hold the model. Note the set you will receive if purchased will includes "a pair" of Tempest blasters, however the pictures above depict only one blaster.
by
BigHache
Smoke stacks to replace the rubber ones in the Leader Class Optimus Prime figures. Simply remove the rubber ones and insert these.
This is the version B that is 1cm longer than the original model.
Note: please make sure that you've done any painting/effects to these before install. The Strong & Flexible material won't take several installs and removals.
This is the version B that is 1cm longer than the original model.
Note: please make sure that you've done any painting/effects to these before install. The Strong & Flexible material won't take several installs and removals.
by
TreadshotA1
An upgrade kit for Fall Of Cybertron Deluxe Class Onslaught figure.
-
Kit includes: -- 2x Twin Cannons (Left/Right) -- 2x Hinges (Left/Right) -- 1x Hinge Blaster NOTE: WSF Polished is being allowed due to demand. Model has not yet been printed in this material. Purchasing this model in WSFP is at the buyer's risk.
by
zoso1900
Add on kit for to turn Prime Wheeljack mold into Hot Rod. The pipes and spoiler are on ball joints to make them integrated with the transformation. The pipes are held on using clips that slide on the lip at the bottom of the door/arm. The ball joint for the pipes can be a little loose but will hold in place without a problem. The spoiler plugs into the location of the current, smaller stock spoiler. It is tight without the placement of screws but the mount has holes to allow the reuses the stock screws that are used with the stock spoiler. These parts have been tested using WSF. Thanks for looking and enjoy.
by
sunlink
Inspired by the original G1 Hot Rod's weapon. This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole and Classics Rodimus 4mm peg hole.
by
TreadshotA1
"What if Starscream actually led the 'Cons? He'd have twin Fusion Boosters, that's what. And they'd attach in Jet mode to make him fly even faster!
When you let Starscream finally have the power he desires, what could be better than rubbing it in his former master's face by giving him twin Fusion Cannons? Three missiles either side was never enough to really obliterate the remaining 'Bots. A fusion cannon on each arm...that's twice the firepower that Megatron had!
To add insult to injury, these Fusion Cannons aren't spiked just to look cool. They aren't sloped and sheared just for looks either. They're made to pierce the air, and when they're attached to the side of Starscream's Jet mode, entering orbit is a very real possibility. Powered by Dark Energon, even Starscream struggles to control his flight. He'd never admit that, of course."
Model includes 2 Fusion Boosters for TFP First Edition Starscream. Fusion Boosters attach in Jet and Robot modes.
by
lorddragonmaster
Whether you are unlocking a cyberforming omega device, or just wanting to play hide and go seek the relic, the Omega Keys are for you! These handy keys are great for keeping both Autobots and Decepticons distracted, as they search for a means of restoring their war torn home, or transforming yours! You can also store them in extra any Iacon canisters, Elite Guard trainees, or old socks for safe keeping.
Yes these little suckers do it all! (Except for plugging into transformers to allow additional weapons to pop out. That’s just ridiculous.)
Each knock off…er I mean…totally authentic original, comes in a set of 4.
Get them before your enemies do!
(Does not include Omega lock)
(Do not trade to Decepticons in exchange for Children)
This product has been successfully tested in WSF
by
baltimore
Remember that awesome video game for atari called Adventure? Here's your chance to own all the objects from it! Available in my shop are the keys, bridge, gates, all three styles of dragon, sword, hero, chalice, bat, and magnet.
you probably will want a few colors
