by
robo3687
NOTE: This ring does not come with a leather cord. You can easily (and inexpensively buy such a cord from ebay (search for 'flat leather cord') or from a craft store.
Price Reductions are now permanent
Stainless Steel = $25
Sterling Silver Glossy = $70
Antique Bronze = $27
It has 3 inscriptions:
- SIC PARVIS MAGNA: meaning "Greatness from small beginnings"
- 29 Januarie 1596: the day after Sir Francis supposedly died
- 9.32.79: The coordinates of his coffin
Ring comes in one size only and is designed to be worn around your neck (or on your finger if it fits, it's a US size 10)
For the Uncharted 1+2 version of the ring go here: http://shpws.me/ETR
Price Reductions are now permanent
Stainless Steel = $25
Sterling Silver Glossy = $70
Antique Bronze = $27
It has 3 inscriptions:
- SIC PARVIS MAGNA: meaning "Greatness from small beginnings"
- 29 Januarie 1596: the day after Sir Francis supposedly died
- 9.32.79: The coordinates of his coffin
Ring comes in one size only and is designed to be worn around your neck (or on your finger if it fits, it's a US size 10)
For the Uncharted 1+2 version of the ring go here: http://shpws.me/ETR
by
roessnakhan
A replica of Cobb's totem from the film "Inception". As a below review has noted, and from my own version, the top works very well, and spins upwards of 90 seconds before toppling. You just might be in a dream.
by
joabaldwin
This is a mobius strip of Level 1 or Super Mario Bros. The whole level is wrapped around itself in a single surface, and poor Mario begins and ends at the same spot every time :(
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
by
fakebusker83
Version 4.5: Edited for peg locks to be sturdier.
Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!
This version is successfully tested on WSF and FUD.
Radicon thread here
Flickr gallery here.
Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!
This version is successfully tested on WSF and FUD.
Radicon thread here
Flickr gallery here.
by
fakebusker83
Version 2.0
This is an update for the pair of hands I did for ROTF Leader class Optimus Prime. Much time has been invested in making them look as movie accurate as possible. These hands, like their predecessors, are fully articulated with ball joints on the fingers, thumbs and wrists and they are capable of holding 5mm peg mechtech weapons as well as his original rifle!
Recommended materials: Strong Flexible
This is an update for the pair of hands I did for ROTF Leader class Optimus Prime. Much time has been invested in making them look as movie accurate as possible. These hands, like their predecessors, are fully articulated with ball joints on the fingers, thumbs and wrists and they are capable of holding 5mm peg mechtech weapons as well as his original rifle!
Recommended materials: Strong Flexible
by
Drawn-SteelHero
Fearsome-looking machine gun converts into a 56mm robot action figure with 10 points of articulation.
Gun mode's handle is a 5mm diameter peg, making it compatible with many larger robot action figures.
Supplied as a 14-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions available at:
http://www.shapeways.com/forum/index.php?t=msg&goto=21214&#msg_21214
If you purchase Salvo, in any material, I'd love to see your results in the "It Arrived" forum!
Gun mode's handle is a 5mm diameter peg, making it compatible with many larger robot action figures.
Supplied as a 14-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions available at:
http://www.shapeways.com/forum/index.php?t=msg&goto=21214&#msg_21214
If you purchase Salvo, in any material, I'd love to see your results in the "It Arrived" forum!
by
fakebusker83
A fusion cannon and blade replacement for the TF: Prime Powerizer Megatron figure! This set includes a fusion cannon and an forearm armour attachment with a fold-out blade.
All components need to be assembled, and the cannon is designed to accommodate an LED circuit.
For the "Dark Energon" variant, click here
This model has been successfully tested and recommended in White Strong Flexible material.
All components need to be assembled, and the cannon is designed to accommodate an LED circuit.
For the "Dark Energon" variant, click here
This model has been successfully tested and recommended in White Strong Flexible material.
by
fakebusker83
A fusion cannon and blade replacement for the TF: Prime Powerizer Megatron figure! This set includes a fusion cannon and an forearm armour attachment with a fold-out blade.
All components need to be assembled, and the cannon is designed to accommodate an LED circuit.
For the "Dark Energon" variant, click here
This model has been successfully tested and recommended in White Strong Flexible material.
All components need to be assembled, and the cannon is designed to accommodate an LED circuit.
For the "Dark Energon" variant, click here
This model has been successfully tested and recommended in White Strong Flexible material.
by
COVO
Product Name "Ring of the gamer". Designed by Japan.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
by
joabaldwin
Low polygon Cloud Strife from Final Fantasy 7. I modeled him identical to the original low poly you see in the FF7 videogame (not the cutscenes version or fights version, but the playable, big headed one you actually control).
#####This is NOT an official model by Square Enix#####
I just made it myself since I couldn't find official merchandise with the low poly character.
The 3d print looks great, though the hair isn't as spiky as it should be, since color printing can't do such sharp points.
#####This is NOT an official model by Square Enix#####
I just made it myself since I couldn't find official merchandise with the low poly character.
The 3d print looks great, though the hair isn't as spiky as it should be, since color printing can't do such sharp points.
by
fakebusker83
Version 2.0
A pair of mighty, tri-barreled blaster accessories for TF: Prime RID deluxe Cliffjumper! These are inspired by their appearance in the animated series, and offers a great compromise between playability and show-accuracy!
Version 2.0 has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr gallery here.
A pair of mighty, tri-barreled blaster accessories for TF: Prime RID deluxe Cliffjumper! These are inspired by their appearance in the animated series, and offers a great compromise between playability and show-accuracy!
Version 2.0 has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr gallery here.
by
Automaster
AVAILABLE NOW!!
Here is Seeker Missile 2.0. Designed to be more in scale with your Seeker's arm than the store bought clunky ones, and it has added detail. This gives you, the fan, the choice of weapon length for your Seeker Army.
For smoothest results order in White Strong & Flexible Polished. Perfect for Classics/Henkei/Universe/Generations Starscream, Skywarp, Thundercracker, Ramjet, Dirge, Thrust, and Acid Storm.
I've personally designed these missiles for your Seeker army. These are sleek and lean compared to the clunky store bought versions. Looks great printed in white, black, or gray strong & flexible. For a super smooth store-like finish order in White, Strong & Flexible Polished and paint accordingly.
If you've ordered my products and are really happy with them, please take a minute to leave me feedback at tfw2005.com:
http://www.tfw2005.com/boards/commissioner-listing-feedback/476321-automaster-customs-shapeways-tf-accessories.html
I appreciate your business and your feedback will help me make more and better products.
Here is Seeker Missile 2.0. Designed to be more in scale with your Seeker's arm than the store bought clunky ones, and it has added detail. This gives you, the fan, the choice of weapon length for your Seeker Army.
For smoothest results order in White Strong & Flexible Polished. Perfect for Classics/Henkei/Universe/Generations Starscream, Skywarp, Thundercracker, Ramjet, Dirge, Thrust, and Acid Storm.
I've personally designed these missiles for your Seeker army. These are sleek and lean compared to the clunky store bought versions. Looks great printed in white, black, or gray strong & flexible. For a super smooth store-like finish order in White, Strong & Flexible Polished and paint accordingly.
If you've ordered my products and are really happy with them, please take a minute to leave me feedback at tfw2005.com:
http://www.tfw2005.com/boards/commissioner-listing-feedback/476321-automaster-customs-shapeways-tf-accessories.html
I appreciate your business and your feedback will help me make more and better products.
by
Automaster
AVAILABLE NOW!!
Here is Seeker Missile 2.0. Designed to be more in scale with your Seeker's arm than the store bought clunky ones, and it has added detail. This gives you, the fan, the choice of weapon length for your Seeker Army.
For smoothest results order in White Strong & Flexible Polished. Perfect for Classics/Henkei/Universe/Generations Starscream, Skywarp, Thundercracker, Ramjet, Dirge, Thrust, and Acid Storm.
I've personally designed these missiles for your Seeker army. These are sleek and lean compared to the clunky store bought versions. Looks great printed in white, black, or gray strong & flexible. For a super smooth store-like finish order in White, Strong & Flexible Polished and paint accordingly.
If you've ordered my products and are really happy with them, please take a minute to leave me feedback at tfw2005.com:
http://www.tfw2005.com/boards/commissioner-listing-feedback/476321-automaster-customs-shapeways-tf-accessories.html
I appreciate your business and your feedback will help me make more and better products.
Here is Seeker Missile 2.0. Designed to be more in scale with your Seeker's arm than the store bought clunky ones, and it has added detail. This gives you, the fan, the choice of weapon length for your Seeker Army.
For smoothest results order in White Strong & Flexible Polished. Perfect for Classics/Henkei/Universe/Generations Starscream, Skywarp, Thundercracker, Ramjet, Dirge, Thrust, and Acid Storm.
I've personally designed these missiles for your Seeker army. These are sleek and lean compared to the clunky store bought versions. Looks great printed in white, black, or gray strong & flexible. For a super smooth store-like finish order in White, Strong & Flexible Polished and paint accordingly.
If you've ordered my products and are really happy with them, please take a minute to leave me feedback at tfw2005.com:
http://www.tfw2005.com/boards/commissioner-listing-feedback/476321-automaster-customs-shapeways-tf-accessories.html
I appreciate your business and your feedback will help me make more and better products.
by
robo3687
Carry the power of the tri-force with you wherever you go.
by
Tom.B
---Update, Small parts have been added to a runner so the gun can now be made in Black Strong Flexible---A space aged Magnum pistol for your DX or Voyager Transformers. When assembled the pistol can open for reloading (see images).
by
fakebusker83
Version 1.5
Edit: I've added spare finger pieces in case any of your fingerjoints break during assembly. This happens when you are printing in Frosted Ultra Detail.
A pair of posable hands for the Masterpiece Seeker figure! This is compatible with MP-3 Starscream and all his subsequent repaints. Each hand has a wrist ball joint, thumb ball joints, and 4 individual posable fingers!
This model has been tested successfully with White Strong Flexible and Frosted Ultra Detail. FUD fingers have a 25% chance of breaking so please be careful during assembly.
Pegged wrist variant here.
Edit: I've added spare finger pieces in case any of your fingerjoints break during assembly. This happens when you are printing in Frosted Ultra Detail.
A pair of posable hands for the Masterpiece Seeker figure! This is compatible with MP-3 Starscream and all his subsequent repaints. Each hand has a wrist ball joint, thumb ball joints, and 4 individual posable fingers!
This model has been tested successfully with White Strong Flexible and Frosted Ultra Detail. FUD fingers have a 25% chance of breaking so please be careful during assembly.
Pegged wrist variant here.
by
Tom.B
A Transformers sized Plasma Cutter! Based on the Dead Space 2 design. For use with any DX transformer that needs to cut the arms and legs off some kind of horrible living nightmare!
by
sunlink
Inspired by Marvel's G1 comic version of Shockwaves laser hand comes this add-on accessory for your Fall of Cybertron Shockave. Laser hand fits on either hand.
by
sevensheaven
The classic old school Mario from the NES version of Super Mario Brothers, carefully translated to 3D pixels.
This is a separately orderable part from the Mariorama sculpture, which can also be found in the Sevensheaven 3D Print Store.
This is a separately orderable part from the Mariorama sculpture, which can also be found in the Sevensheaven 3D Print Store.
by
process
A rifle designed for Classics/Henkei/United Optimus Prime, or any other figure with 5mm fist holes. Inspired by drawings by IDW.
by
Tom.B
My most popular model! A medium sized blaster for all your DX and Voyager Transformers.
by
fakebusker83
A pair of hands with individually posable fingers and thumbs. Knuckle width 14mm, wrist ball diameter 5mm.
This model has been successfully tested in White Strong Flexible.
This model has been successfully tested in White Strong Flexible.
by
Automaster
Available Now!!
A sword redesigned to fit in the grip of Transformers Classics Grimlock or Alternators Grimlock.
Looks great printed in red. For a super smooth store-like finish, order in White, Strong & Flexible Polished and paint red.
If you've ordered my products and are really happy with them, please take a minute to leave me feedback at tfw2005.com:
http://www.tfw2005.com/boards/commissioner-listing-feedback/476321-automaster-customs-shapeways-tf-accessories.html
I appreciate your business and your feedback will help me make more and better accessories!
A sword redesigned to fit in the grip of Transformers Classics Grimlock or Alternators Grimlock.
Looks great printed in red. For a super smooth store-like finish, order in White, Strong & Flexible Polished and paint red.
If you've ordered my products and are really happy with them, please take a minute to leave me feedback at tfw2005.com:
http://www.tfw2005.com/boards/commissioner-listing-feedback/476321-automaster-customs-shapeways-tf-accessories.html
I appreciate your business and your feedback will help me make more and better accessories!
by
BigHache
Smoke stacks to replace the rubber ones in the Leader Class Optimus Prime figures. Simply remove the rubber ones and insert these.
Note: please make sure that you've done any painting/effects to these before install. The Strong & Flexible material won't take several installs and removals. I've opened up additional materials, however, please be aware that only WSF has been tested.
Note: please make sure that you've done any painting/effects to these before install. The Strong & Flexible material won't take several installs and removals. I've opened up additional materials, however, please be aware that only WSF has been tested.
by
fakebusker83
Version 2.0
This set is specially designed for the War for Cybertron deluxe Megatron figure! It consists of a pair of forearms and a vambrace which are fully capable of working with the figure's transformation and they look great in both robot and vehicle modes!
These hands have individually posable fingers and thumbs, and are capable of holding compatible 5mm peg accessories.
This set is also compatible with the Atomic Obliterator .
Radicon thread here.
Flickr gallery here.
This set is specially designed for the War for Cybertron deluxe Megatron figure! It consists of a pair of forearms and a vambrace which are fully capable of working with the figure's transformation and they look great in both robot and vehicle modes!
These hands have individually posable fingers and thumbs, and are capable of holding compatible 5mm peg accessories.
This set is also compatible with the Atomic Obliterator .
Radicon thread here.
Flickr gallery here.
by
fakebusker83
Version 2.0
The Sonic Spike Projector is a weapon accessory that can be used as a heavy pistol or extended in length to form a kick ass rifle! It uses the 5mm peg system for handles and ports and is compatible with many different figures.
Putting the Projector together is a simple matter of twisting and sliding in both outer shells onto the central core and attaching the spike projectile on the front.
This accessory is designed as a counterpart to the shoulder cannon that comes with Fall of Cybertron Voyager Soundwave, and scales nicely with that figure.
Standard length is 95 mm long, extended length is 108 mm.
Version 1.0 has been tested in White Strong Flexible. Version 2.0 has not been tested yet.
The Sonic Spike Projector is a weapon accessory that can be used as a heavy pistol or extended in length to form a kick ass rifle! It uses the 5mm peg system for handles and ports and is compatible with many different figures.
Putting the Projector together is a simple matter of twisting and sliding in both outer shells onto the central core and attaching the spike projectile on the front.
This accessory is designed as a counterpart to the shoulder cannon that comes with Fall of Cybertron Voyager Soundwave, and scales nicely with that figure.
Standard length is 95 mm long, extended length is 108 mm.
Version 1.0 has been tested in White Strong Flexible. Version 2.0 has not been tested yet.
by
AyameDeude
Get all retro in the 90's with an 8-bit Gameboy Classic pendant!
Intended to be printed in full color sandstone, this Gameboy pendant stands out and shows just how classic a gamer you are.
Intended to be printed in full color sandstone, this Gameboy pendant stands out and shows just how classic a gamer you are.
by
Automaster
AVAILABLE NOW!!
Designed to fit with Classics/Henkei/Botcon Sideswipe, Red Alert, Botcon Breakdown, and Botcon Custom Class G2 Sideswipe.
Upgrade your guys NOW with Super Detail!!
Available in White or Red, Strong, & Flexible.
For a very smooth store-like finish, order in White, Strong & Flexible Polished and paint accordingly. This option may require you to use clear fingernail polish or something similar to bulk up the peg for the fisthole. The polishing process can reduce a small bit of material. Also available in White Detail.
If you've ordered my products and are really happy with them, please take a minute to leave me feedback at tfw2005.com:
http://www.tfw2005.com/boards/commissioner-listing-feedback/476321-automaster-customs-shapeways-tf-accessories.html
I appreciate your business and your feedback will help me make more and better weapon accessories!
Designed to fit with Classics/Henkei/Botcon Sideswipe, Red Alert, Botcon Breakdown, and Botcon Custom Class G2 Sideswipe.
Upgrade your guys NOW with Super Detail!!
Available in White or Red, Strong, & Flexible.
For a very smooth store-like finish, order in White, Strong & Flexible Polished and paint accordingly. This option may require you to use clear fingernail polish or something similar to bulk up the peg for the fisthole. The polishing process can reduce a small bit of material. Also available in White Detail.
If you've ordered my products and are really happy with them, please take a minute to leave me feedback at tfw2005.com:
http://www.tfw2005.com/boards/commissioner-listing-feedback/476321-automaster-customs-shapeways-tf-accessories.html
I appreciate your business and your feedback will help me make more and better weapon accessories!
by
fakebusker83
Version 1.5
“As part of the main arsenal of the venerable Seeker squadrons, the Beamer has gained somewhat of a notoriety among enemies and subjugated populations. Many a tale has been told of commanders being instantly vaporised and entire armies thrown into disarray, all from a single shot of a lone Seeker agent. And where is this Seeker? A hundred miles away. Many worlds and their native species have been conquered this way, using the most expedient of strategies.”
The Beamer measures an impressive 10cm length, and comes with a unique sniper scope which can be mounted on the 3mm clip rail on the top rear. It can be held normally with its 5mm peg, or it can be held with the figure’s fist sheath within the Beamer chassis.
This model has been successfully tested in White Strong Flexible.
“As part of the main arsenal of the venerable Seeker squadrons, the Beamer has gained somewhat of a notoriety among enemies and subjugated populations. Many a tale has been told of commanders being instantly vaporised and entire armies thrown into disarray, all from a single shot of a lone Seeker agent. And where is this Seeker? A hundred miles away. Many worlds and their native species have been conquered this way, using the most expedient of strategies.”
The Beamer measures an impressive 10cm length, and comes with a unique sniper scope which can be mounted on the 3mm clip rail on the top rear. It can be held normally with its 5mm peg, or it can be held with the figure’s fist sheath within the Beamer chassis.
This model has been successfully tested in White Strong Flexible.
by
Automaster
AVAILABLE NOW!!
The Automaster Blaster is an original design perfectly situated for the many iterations of Classics Bumblebee and Cliffjumper.
It will fit in a whole host of other Autobot or Decepticon fist holes at 5mm.
If you've ordered my products and are really happy with them, please take a minute to leave me feedback at tfw2005.com
http://www.tfw2005.com/boards/commissioner-listing-feedback/476321-automaster-customs-shapeways-tf-accessories.html
I appreciate your business and your feedback will help me make more and better weapon accessories!
The Automaster Blaster is an original design perfectly situated for the many iterations of Classics Bumblebee and Cliffjumper.
It will fit in a whole host of other Autobot or Decepticon fist holes at 5mm.
If you've ordered my products and are really happy with them, please take a minute to leave me feedback at tfw2005.com
http://www.tfw2005.com/boards/commissioner-listing-feedback/476321-automaster-customs-shapeways-tf-accessories.html
I appreciate your business and your feedback will help me make more and better weapon accessories!
by
Tom.B
A large cannon weapon perfect for DOTM Voyager Ironhide, Generations Warpath, or any DX Transformer in need of some fire-power. The cannon has four peg positions, and two pegs so you can position them wherever you like.
by
Tom.B
--Blockhead's guns are here: http://www.shapeways.com/model/618627/blockhead-s-guns.html ---A custom legion class size figure. A little off-road a little muscle-car, Block head my not be the smartest bot around but there's no one better suited to get the word out to troops in remote locations.
by
fakebusker83
Version 2.0
"Sometimes, a single projectile is not enough. The Shrapnel Caster is specially designed to fire hundreds of energetic shards per shot, each shard being able to penetrate 3 inches of dura-armour before losing structural integrity and exploding. The chassis of the caster is able to fire on full automatic, and trigger happy owners are known to fill the sky with thousands and thousands of deadly shards."
The rear half of the caster can be rotated to adapt to different figures' hands. The pump handle rail can also serve as a 3mm clip mount.
The Shrapnel Caster is 6.7 cm in length.
This model has been successfully tested in White Strong Flexible.
"Sometimes, a single projectile is not enough. The Shrapnel Caster is specially designed to fire hundreds of energetic shards per shot, each shard being able to penetrate 3 inches of dura-armour before losing structural integrity and exploding. The chassis of the caster is able to fire on full automatic, and trigger happy owners are known to fill the sky with thousands and thousands of deadly shards."
The rear half of the caster can be rotated to adapt to different figures' hands. The pump handle rail can also serve as a 3mm clip mount.
The Shrapnel Caster is 6.7 cm in length.
This model has been successfully tested in White Strong Flexible.
by
sevensheaven
The classic old school Goomba character from the NES version of the Super Mario Brothers game, carefully translated to 3D pixels.
This is a separately orderable part from the Mariorama sculpture, which can also be found in the Sevensheaven 3D Print Store.
This is a separately orderable part from the Mariorama sculpture, which can also be found in the Sevensheaven 3D Print Store.
