by
robo3687
NOTE: This ring does not come with a leather cord. You can easily (and inexpensively buy such a cord from ebay (search for 'flat leather cord') or from a craft store.
Price Reductions are now permanent
Stainless Steel = $25
Sterling Silver Glossy = $70
Antique Bronze = $27
It has 3 inscriptions:
- SIC PARVIS MAGNA: meaning "Greatness from small beginnings"
- 29 Januarie 1596: the day after Sir Francis supposedly died
- 9.32.79: The coordinates of his coffin
Ring comes in one size only and is designed to be worn around your neck (or on your finger if it fits, it's a US size 10)
For the Uncharted 1+2 version of the ring go here: http://shpws.me/ETR
Price Reductions are now permanent
Stainless Steel = $25
Sterling Silver Glossy = $70
Antique Bronze = $27
It has 3 inscriptions:
- SIC PARVIS MAGNA: meaning "Greatness from small beginnings"
- 29 Januarie 1596: the day after Sir Francis supposedly died
- 9.32.79: The coordinates of his coffin
Ring comes in one size only and is designed to be worn around your neck (or on your finger if it fits, it's a US size 10)
For the Uncharted 1+2 version of the ring go here: http://shpws.me/ETR
by
roessnakhan
A replica of Cobb's totem from the film "Inception". As a below review has noted, and from my own version, the top works very well, and spins upwards of 90 seconds before toppling. You just might be in a dream.
by
neuralfirings
Sad Keanu comes in two sizes. Both are equally sad.
Teeny Keanu ($25)
Little Keanu ($45)
Want to get both?
+
Cheer up, Little Keanu Reeves, it's ok. Just finish your sandwich and march on. Life is like a box of chocolate. Which pill will you choose? There is no spoon. You can't handle the truth! Wait. What was I doing again?
Want to make some 3d printed goodies? Check out my latest project,
by
Whystler
The nocturnal (or nocturlabe) is a very old instrument for telling time at night by measuring the stars. While concept is ancient, this design is all original. It is fully functional (all dials move properly) and meant to be worn as a pendant. This is now available for sale, as it has been tested and works nicely.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
by
NovastarDesign
Skyrim pendant
I made a pendant inspired from the The Imperial Symbol of the game Elder Scrolls V: Skyrim. I hope people who love this game also love this pendant. On the top of the wings are two holes, so you can wear it like a pendant. The pendant is double sided, both sides look the same. The picture shows the wrong way ;-0
I already have pictures of the pendant in stainless steel pictures in stainless steel
Also check out my Skyrim 'Dragonborn' ring Skyrim 'Dragonborn' ring.
The pendant is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.
I made a pendant inspired from the The Imperial Symbol of the game Elder Scrolls V: Skyrim. I hope people who love this game also love this pendant. On the top of the wings are two holes, so you can wear it like a pendant. The pendant is double sided, both sides look the same. The picture shows the wrong way ;-0
I already have pictures of the pendant in stainless steel pictures in stainless steel
Also check out my Skyrim 'Dragonborn' ring Skyrim 'Dragonborn' ring.
The pendant is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.
by
Dotsan
No1 in the series of animal heads, a smaller version of the 570mm high Stag Head (which is not available on Shapeways)
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino. A large Rhino is also available.
No 4 is a Tiger.
Tiger Head 2.
Large Tiger Head.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino. A large Rhino is also available.
No 4 is a Tiger.
Tiger Head 2.
Large Tiger Head.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
by
nakamura_shop
-Default size is D.18mm (finger diameter)
- Assassin's ring the size is adaptable because the ring is flexible
- now the model is a Co-creator
- Suggest for all... if you want enlarge the ring you have to flex the wings,not the Assassin symbol
by
avandius
Interlocking gears in a steampunk theme. These standard sized gear dice will keep your game turning (figuratively speaking, they do not actually turn...)
With percentile die.
DIY instructions for plastics can be found here, along with pictures.
With percentile die.
DIY instructions for plastics can be found here, along with pictures.
by
stefdevos
This detailed model of the moon is hollow and therefore very price efficient. It will balance on a small gap on the bottom. You can also hang it on a wire using a bent paperclip. See video and images. Made for full color sandstone.
by
aeron203
A clock frozen in time, the Time Keeper commemorates a birth date, an anniversary, or any other significant moment in your life, in history, or the future. It will keep that time with perfect accuracy, forever. You set the date and time. You can also include a short message below the date.
UPDATE: The Time Keeper has been thickened 50% to ensure printability.
UPDATE: The Time Keeper has been thickened 50% to ensure printability.
by
kspaho
Yes I did go there. After talking to Christopher Carter from Shapeways, he made me realize the power of the Meme. So here you have it, the mightly anteater who doesn't give a damn. Don't forget to check out ((F U I'm Anta Claus)) and the ((honey badger))
by
ryankittleson
Based on the famous painting that's used to make antiquated versions of rap lyrics.
by
SheilaMunro
Detailed Raven Mask Necklace Charm. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca Only $39.99 in Gold Plated Glossy. Successfully printed in a variety of materials, bars are approximately 2-3 mm.
by
arthurditlef
ARTIFICIAL NATURE SERIES
Inspired by Nature, with an artificial twist.
Inspired by Nature, with an artificial twist.
by
Ammnra
Ring based on Assassin's Creed Apple of Eden
US Sizes 6-12 (in Half Sizes)
NOTE: Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
US Sizes 6-12 (in Half Sizes)
NOTE: Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
by
Ammnra
Ring inspired by the Omni Tool and Omni Blade from the Mass Effect universe
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Painted with 6 thin coats of Orange Transparent Glass Paint (Americana Crystal Gloss Enamels)
Black line painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Painted with 6 thin coats of Orange Transparent Glass Paint (Americana Crystal Gloss Enamels)
Black line painting guide
Thanks for your order and commitment to nerd culture!
by
JoshuaHarker
The Guy Fawkes mask that has become a symbol of solidarity among the anonymous 99% of the "Occupy" movement & an indelible icon in political & pop culture. Smallest size (1 inch) available in Silver at this scale. Features a ring on the back to wear as a necklace or hang as a pendant.
by
arthurditlef
ARTIFICIAL NATURE SERIES
Inspired by Nature, with an artificial twist.
New Version! More support added so it is now harder to fall due pen weight.
Inspired by Nature, with an artificial twist.
New Version! More support added so it is now harder to fall due pen weight.
by
Ammnra
Larger, Hollow Pendant based on Assassin's Creed Apple of Eden
3mm Hole thru center for your own chain/necklace
Parts in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
3mm Hole thru center for your own chain/necklace
Parts in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
by
SheilaMunro
Beautifully designed Dragon Claw Bracelet by: Sheila Munro. Inner circumference measurement is 19.5 cm. Inner Diameter is approximately: 65mm Distance between claws is: 32 mm. Wearable on the forearm as well. Medium version. Please contact for a custom size, also currently available in SMALL & LARGE. Please DO NOT try to bend open with metal prints to avoid any risk of injury! The metal will not bend, this is a strong, sturdy bracelet in metal. If these sizes will not fit you I will make a custom size no extra cost. ancienteyes@shaw.ca
by
badulaques
"I miss you!" Bracelet. This piece is an expression of feeling the absence of a beloved and irreplaceable. A friend, a father, a mother, a boyfriend or girlfriend, even a beloved pet. This is a delicate and playful gift of love.
To choose the size of the bracelet click "Personalize". Any doubts drop me a note!.
DISCLAIMER:
Make sure you understand all specifications of this piece (such as surface finish, colors, size, etc) before you order one! Any questions? Do you want this piece in others dimensions? Drop me a note!
Your country may charge some importation tax. For more information about that I recomend contact the customs office of your country.
--
"Sinto sua falta!" Bracelete. Esta peça é a expressão do sentimento da ausência de uma pessoa querida e insubstituível. Um amigo, um pai, uma mãe, um namorado ou namorada, até mesmo um animal de estimação amado. É um presente delicado e lúdico de amor.
Para escolher a medida do bracelete, clique em "Personalize". Qualquer dúvida me mande uma mensagem!
ATENÇÃO:
Certifique-se de que entenda todas as especificações das peças (como acabamento, cores, tamanho, etc) antes de adquirí-la! Tem alguma dúvida? Entre em contato!
AOS COMPRADORES NO BRASIL:
Este produto é importado e sobre todo produto de importação a receita federal pode cobrar taxa de importação das peças. A alíquota pode variar entre (60%-100%) e incide sobre o valor total da compra.
To choose the size of the bracelet click "Personalize". Any doubts drop me a note!.
DISCLAIMER:
Make sure you understand all specifications of this piece (such as surface finish, colors, size, etc) before you order one! Any questions? Do you want this piece in others dimensions? Drop me a note!
Your country may charge some importation tax. For more information about that I recomend contact the customs office of your country.
--
"Sinto sua falta!" Bracelete. Esta peça é a expressão do sentimento da ausência de uma pessoa querida e insubstituível. Um amigo, um pai, uma mãe, um namorado ou namorada, até mesmo um animal de estimação amado. É um presente delicado e lúdico de amor.
Para escolher a medida do bracelete, clique em "Personalize". Qualquer dúvida me mande uma mensagem!
ATENÇÃO:
Certifique-se de que entenda todas as especificações das peças (como acabamento, cores, tamanho, etc) antes de adquirí-la! Tem alguma dúvida? Entre em contato!
AOS COMPRADORES NO BRASIL:
Este produto é importado e sobre todo produto de importação a receita federal pode cobrar taxa de importação das peças. A alíquota pode variar entre (60%-100%) e incide sobre o valor total da compra.
by
FreakingRiddle
The most famous weapon of the superhero Batman is here!!!Theeee...BATARANG!!!
by
MaxiOli
This is an extension for the mini ES 2x2x2 puzzle
YOU NEED 8 PCS OF THIS to complete the "6 corners of the world" puzzle.
It was first showed at the following Twisty Puzzles Forum topic:
http://twistypuzzles.com/forum/viewtopic.php?f=15&t=19866
For the stickers, you need to contact me at: rubikkocka@gmail.com
YOU NEED 8 PCS OF THIS to complete the "6 corners of the world" puzzle.
It was first showed at the following Twisty Puzzles Forum topic:
http://twistypuzzles.com/forum/viewtopic.php?f=15&t=19866
For the stickers, you need to contact me at: rubikkocka@gmail.com
by
aeron203
This will decorative key will blend right in with your house keys, but carry your important message. You can write up to 6 characters on the bow and 9 on the blade.
by
MacBurro
A Little SteamPunk World Model for Desk Decoration
by
TurtlesAreCool
“But it is one thing to read about dragons and another to meet them.”
― Ursula K. Le Guin, A Wizard of Earthsea
Meet Kynar. Small enough to nestle snugly in your palm, fierce enough to leave indelible marks in unwary fingers, inquisitive enough to ride on your shoulder for hours, absorbing the essence of the world around him.
Treat him well, feed him carefully, and mind the scales in shedding season.
Meet Kynar. Small enough to nestle snugly in your palm, fierce enough to leave indelible marks in unwary fingers, inquisitive enough to ride on your shoulder for hours, absorbing the essence of the world around him.
Treat him well, feed him carefully, and mind the scales in shedding season.
by
ksimmons
This Unicursal Hexagram pendant is 1.3 inches tall. View the unicursal hexegram in 3d.
http://en.wikipedia.org/wiki/Unicursal_hexagram
2010-12-21: Untested print.
2010-12-21: Reoriented hoop on top.
2010-12-21: Ordered first print, waiting for arrival.
2010-12-23: Print cancelled due to wall thickness.
2011-01-23: This model is being updated with a larger, more functional clasp. Look for updates within the next couple days.
2011-01-27: This model has been revised and should be printable with a functional clasp. Print is still untested, updates soon.
2011-01-27: Test print ordered in stainless steel and alumide, expected arrival on February 16th.
2011-04-22: New photo uploaded.
http://en.wikipedia.org/wiki/Unicursal_hexagram
2010-12-21: Untested print.
2010-12-21: Reoriented hoop on top.
2010-12-21: Ordered first print, waiting for arrival.
2010-12-23: Print cancelled due to wall thickness.
2011-01-23: This model is being updated with a larger, more functional clasp. Look for updates within the next couple days.
2011-01-27: This model has been revised and should be printable with a functional clasp. Print is still untested, updates soon.
2011-01-27: Test print ordered in stainless steel and alumide, expected arrival on February 16th.
2011-04-22: New photo uploaded.
by
aeron203
The pencil is mightier than the sword. The original concept for this included having a selection of these miniature medieval designs vertically on a rack, with the hardness of the pencil written on each topper.
by
NovastarDesign
The molar teeth-shaped Brush'eM ! Kids is a funny toothbrush-holder with holes, which in it's own little way might contribute to the dental care awareness of kids.
This work is copyright © Novastar Design, Netherlands, 2011-2012. All rights reserved.
This work is copyright © Novastar Design, Netherlands, 2011-2012. All rights reserved.
by
Schaeffer
The scorpion is designed to be a pendant using the tail for the leather cord or necklace but will also stand on its own as a figurine/miniature.
by
Whystler
Here is a tower-like candelabra, which has a housing for an LED and coin battery (both supplied by purchaser). While the piece is lovely and interesting on its own, a shade is available, sold separately, in the shop to diffuse the light and provide more character.
Directions for assembly:
When you look at the housing where the coin battery slips in, you will notice that there are three supports that define this space. Two look the same, and one looks a little different. Let's call the one that looks different the "back support".
Get yourself an a standard 5mm LED. Any colour is good - your choice. For the brightest, I would recommend a super bright white or an ultra bright white. But for fun, know that blue and green LED's look very nice with the moon shade if you have bought it also :) Notice that one of the wires coming from the LED is longer. This is the "positive" wire.
Insert the wires of the LED down through the top hole in the candelabra, and wrap the "positive" wire around the "back support" taking care that it is placed so that it will only touch the battery at this place and no other.
Bend the other wire in a such a way that it will touch only the topside of the battery.
Get yourself a 2cm diameter, 3 volt coin battery. The ones I use are described by this code: CR2025. Insert this battery, negative side up, into the LED Candelabra housing.
Your Candelabra should immediately turn on nicely! Note that you can slide the battery slightly away from the back support and this will turn the light out.
If you have purchased the shade, this is very easy to twist on. Simply drop the shade down allowing its slots to slide over the three housing supports. Then twist the shade to secure it fits tightly.
Enjoy!
-Whystler
Directions for assembly:
When you look at the housing where the coin battery slips in, you will notice that there are three supports that define this space. Two look the same, and one looks a little different. Let's call the one that looks different the "back support".
Get yourself an a standard 5mm LED. Any colour is good - your choice. For the brightest, I would recommend a super bright white or an ultra bright white. But for fun, know that blue and green LED's look very nice with the moon shade if you have bought it also :) Notice that one of the wires coming from the LED is longer. This is the "positive" wire.
Insert the wires of the LED down through the top hole in the candelabra, and wrap the "positive" wire around the "back support" taking care that it is placed so that it will only touch the battery at this place and no other.
Bend the other wire in a such a way that it will touch only the topside of the battery.
Get yourself a 2cm diameter, 3 volt coin battery. The ones I use are described by this code: CR2025. Insert this battery, negative side up, into the LED Candelabra housing.
Your Candelabra should immediately turn on nicely! Note that you can slide the battery slightly away from the back support and this will turn the light out.
If you have purchased the shade, this is very easy to twist on. Simply drop the shade down allowing its slots to slide over the three housing supports. Then twist the shade to secure it fits tightly.
Enjoy!
-Whystler
by
virtox
Dodecahedron LED Cap
Material translucency test.
(example is WSF)
A cap for short 5 mm, high output leds.
Other shapes available on request (cubes, spheres, pyramids, you name it)
As startup-costs are half the price on this one, bulk is recommended, please contact me with the shape and amount required.
Material translucency test.
(example is WSF)
A cap for short 5 mm, high output leds.
Other shapes available on request (cubes, spheres, pyramids, you name it)
As startup-costs are half the price on this one, bulk is recommended, please contact me with the shape and amount required.
by
glyphobet
This is a three-dimensional Union Jack.
After some light sanding the parts will fit together very snugly, without any need for glue.
I've colored this one with Sharpie brand permanent marker, which appears to work well and not transfer to the white parts of the model too much.
© 1998, 2009 Matt Chisholm; All rights reserved.
After some light sanding the parts will fit together very snugly, without any need for glue.
I've colored this one with Sharpie brand permanent marker, which appears to work well and not transfer to the white parts of the model too much.
© 1998, 2009 Matt Chisholm; All rights reserved.
by
mendelheit
This little cushion is based on that great Meshlab Tutorial:
http://meshlabstuff.blogspot.com/2009/03/creating-voronoi-sphere.html
This might look good in alumide!
http://meshlabstuff.blogspot.com/2009/03/creating-voronoi-sphere.html
This might look good in alumide!
