Speed commented on 1400_Ave_Quinjet [x5] [H] by Speed
September 19, 2016
1400_Ave_Quinjet [x5] [H]
Speed @Scouls502 Both sets of models now uploaded to show the Flight Mode as requested. Happy printing.
Speed @Scouls502 Ok sorry my mistake we will get those F versions up asap.
Speed @Scouls502 Hi, In the same shop section there is a [F] model which is in flight mode: https://www.shapeways.com/shops/speed?section=1%3A1400+-+Quinjets&s=0
Speed commented on Robocop: ED209 [100mm] by Speed
September 17, 2016
Robocop: ED209 [100mm]
Speed HI guys, sorry but this model is 100mm tall so it would be huge compared to the 6mm or 25-28mm models you might have. We could make a version for FUD by scaling this one down to 28mm and hope it prints if that is of interest. It would definitely not print at 6mm without complete redesign. Let me know if you want a 28mm FUD version.
Check out this cool product! - http://shpws.me/MBTh

Don't forget all of our aircraft are on our PrintedPlanes shop and are cheaper there so please add yourself to the followers of PrintedPlanes for updates and the best deals. 1:700 - Airlander [A]
1:200 - Fighter [Independence Day - Resurgence]
Speed Do you mean the mothership or do you mean the disc shaped ones that came to earth? Just so i am clear.
Speed @19mark93 What size were you looking for and at what scale? Also which one as there is the original one and the new one (with the removable disc at the top). I think anything more than 100mm wide would be too expensive in any material.
Check out this cool product! - http://shpws.me/MBzU 1:200 - Copter [Independence Day - Resurgence]
Check out this cool product! - http://shpws.me/MBzN 1:200 - Fighter [Independence Day - Resurgence]
Check out this cool product! - http://shpws.me/MBzH 1:200 - Space Pod [Independence Day - Resurgence]
Check out this cool product! - http://shpws.me/MBwv 1:87 - Tank: Merkava Mk IV [x1]
Speed commented on 700_Ave_Quinjet [x5] [H] by Speed
July 28, 2016
700_Ave_Quinjet [x5] [H]
Speed @Atlantis Now added as requested.
1/160 - N Scale: Mii Seagrave Tower Ladder
Speed @Nscale@Nscale What do you mean a Real Cabin please?
Speed commented on Future Soldier - 28mm Tall by Speed
July 15, 2016
Speed commented on Hellicarrier [100mm + Hollow] by Speed
June 15, 2016
Hellicarrier [100mm + Hollow]
Speed @Rulo6000 Ok great, well this is at whatever scale you want it to be then :)
Speed @Rulo6000 We calculated it to be about 350m long so a 100mm version would be about 1:350
Speed commented on 144_AOU_Quinjet [x1] by Speed
June 11, 2016
144_AOU_Quinjet [x1]
Speed @ArvisTaljik Great photos, thanks for sharing. Glad you are enjoying the models.
Speed commented on 200_AOU_Quinjet [x1] by Speed
May 23, 2016
200_AOU_Quinjet [x1]
Speed @ArvisTaljik No problem, give me a few days to get it built and uploaded.
Speed commented on 144_Ave_Quinjet [x1] by Speed
May 20, 2016
144_Ave_Quinjet [x1]
Speed @ArvisTaljik That looks really cool. Maybe you fancy some of the GOTG models next: https://www.shapeways.com/shops/gotg
Speed commented on Hellicarrier [180mm] by Speed
May 14, 2016
Hellicarrier [180mm]
Speed @chrisamcd Exactly, for the WSF it was not thick enough in parts so we made it just available in the FUD.
Speed commented on 200_Ave_Quinjet [x1] by Speed
April 21, 2016
200_Ave_Quinjet [x1]
Speed @Shield616 Age of Ultron model now complete in various scales, look for the AOU in the Quinjets name.
Speed Age of Ultron version en route guys
Speed @strider_osiris The Age of Ultron one? Can you email me (adam@inner-leaf.com) some images, also what scale did you require?
Speed @meltweed Hi, Which of those scales would you like at for which material. We strong recommend the FUD material only for our models.
Speed commented on 200_WS_Quinjet [x1] by Speed
April 20, 2016
200_WS_Quinjet [x1]
Speed @ArvisTaljik We have now made 1:144 and 1:72 versions of these two aircraft, just look in our main shop and on the left look in the scaled section 1:144 or 1:72. https://www.shapeways.com/shops/speed
Speed @ArvisTaljik you mean like this? https://www.shapeways.com/shops/speed?section=0_1%3A200+-+Quinjets&s=0
Speed commented on 400_WS_Quinjet [x3] [F] by Speed
January 21, 2016
400_WS_Quinjet [x3] [F]
Speed @stonecld Hi, I scale them up and are now here: https://www.shapeways.com/shops/speed?section=0_1%3A350+-+Quinjets&s=0
Speed @stonecld Yes, How many did you want in a set and is it this version and/or the avengers one?
Speed commented on 1:200 - Gulfstream G550 (XL) by Speed
January 19, 2016
1:200 - Gulfstream G550 (XL)
Speed @ivan_lim Hi, we have this model in 1/500 and 1/400 here in our shop: https://www.shapeways.com/shops/Speed If you choose the scale folder on the left you can find the models there. Did you require a different scale?
Speed commented on 1/700 Gulfstream G550 (x2) by KokodaTrailModels
January 16, 2016
1/700 Gulfstream G550 (x2)
Speed @TexMechsRobot If you did want to get a smoother finish on any models in this material then you have two choices, this model could be released in the FXD material and/or you can use a 400 grade paper to gently buff out the print lines. Its also advisable to apply a primer to this material before sanding and then painting in the final colour.
Speed commented on Hellicarrier - 75mm [Hollow] by Speed
January 5, 2016
Hellicarrier - 75mm [Hollow]
Speed @Masterscifiengineer If you find 5 people interested in buying one then we will definitely make one :)
Speed @Masterscifiengineer Unfortunately at this size we would need to remodel it for Stainless Steel.
Speed commented on 700_WS_Quinjet [x5] [H] by Speed
September 29, 2015
700_WS_Quinjet [x5] [H]
Speed @Scouls502 Love the photos, would you mind emailing them through to me adam@inner-leaf.com please?
Speed commented on 1400_Ws_Quinjet [x5] [H] by Speed
September 29, 2015
1400_Ws_Quinjet [x5] [H]
Speed @Scouls502 We have already modelled Ironman in two separate poses: https://www.shapeways.com/shops/Speed?section=Ironman&s=0


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.