by
Dotsan
No1 in the series of animal heads, a smaller version of the 570mm high Stag Head (which is not available on Shapeways)
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
Please send your pictures and share your thoughts on the design.
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
Please send your pictures and share your thoughts on the design.
by
nervoussystem
The Hyphae lamp is a series of organic table lamps based on how veins form in leaves. Each lamp is a completely one-of-a-kind design 3D-printed in nylon plastic. The lamps are lit by eco-friendly LED's and cast dramatic branching shadows on the wall and ceiling.
Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp
Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp
About Hyphae
Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.
Lighting Specifications
The lamp comes with an eco-friendly 3-watt 200 lumen LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and works off a 120V or 240V outlet.
Please contact us at http://n-e-r-v-o-u-s.com/contact.php to receive the lighting components for the lamp. We will send them to you free of charge if you purchase the lamp shade.
by
nervoussystem
A striking cellular cuff inspired by microscopic cellular structures and created using computer simulation and 3d-printing.
this bracelet is size MEDIUM
also available in size LARGE
The C-shaped design fits close to the skin, is light-weight and uses minimal material. It was built up layer by layer from stainless steel powder using 3D printing and fused in a kiln. The two layer form of the cuff would be impossible to create by traditional manufacturing methods. Its outer surfaces have a smooth, polished finish which contrasts with the unpolished interior to create an intricate, 3-dimensional cuff.
It is a part of our Cell Cycle collection which was inspired by the intricate mineral forms of Radiolarians. The form is the result of a physics simulation of the forces in a cellular network of springs. Using our custom software, we created the Spiral Cuff by morphing, twisting, and subdividing; transforming a simple mesh to a complex patterned structure.
--
this design optimized for printing in stainless steel but is also great in the "Strong & Flexible" family of materials
this bracelet is size MEDIUM
also available in size LARGE
The C-shaped design fits close to the skin, is light-weight and uses minimal material. It was built up layer by layer from stainless steel powder using 3D printing and fused in a kiln. The two layer form of the cuff would be impossible to create by traditional manufacturing methods. Its outer surfaces have a smooth, polished finish which contrasts with the unpolished interior to create an intricate, 3-dimensional cuff.
It is a part of our Cell Cycle collection which was inspired by the intricate mineral forms of Radiolarians. The form is the result of a physics simulation of the forces in a cellular network of springs. Using our custom software, we created the Spiral Cuff by morphing, twisting, and subdividing; transforming a simple mesh to a complex patterned structure.
--
this design optimized for printing in stainless steel but is also great in the "Strong & Flexible" family of materials
by
kspaho
Yes I did go there. After talking to Christopher Carter from Shapeways, he made me realize the power of the Meme. So here you have it, the mightly anteater who doesn't give a damn. Don't forget to check out ((F U I'm Anta Claus)) and the ((honey badger))
by
joabaldwin
Endless motherf$#&ing bacon! A full color, delicious strip of bacon, twisted around itself, having only one side.
All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.
-- Kosher. Vegan friendly. --
Disclaimer for idiots: Don't eat it.
All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.
-- Kosher. Vegan friendly. --
Disclaimer for idiots: Don't eat it.
by
DarioScapittaDesign
BLACK ROSE Armband is a part of an entire jewellery set in polyamide material. The collection includes necklace, ring and earrings available in different size and colours.
Wearing those objects it is like to have just drawed roses up on your skin. The rose's silhouette is able to decorate the body with a touch of glamour; a very classic style reinvented with a chic and modern style.
The BLACK ROSE armband is also available in 3 different size SMALL, MEDIUM and LARGE. www.darioscapittadesign.com
by
nervoussystem
Inspired by the complex forms of radiolarians, where intricate pattern is integral to structure, these shapes derive from a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure.
size (inner circumference)
5 - 49.0mm
6 - 51.5mm
7 - 54.0mm
8 - 56.6mm
9 - 59.1mm
10 - 62.1mm
11 - 64.6mm
12 - 67.2mm
click CREATE to select your size
Watch a video showing the software we created to design these pieces http://vimeo.com/10074976
size (inner circumference)
5 - 49.0mm
6 - 51.5mm
7 - 54.0mm
8 - 56.6mm
9 - 59.1mm
10 - 62.1mm
11 - 64.6mm
12 - 67.2mm
click CREATE to select your size
Watch a video showing the software we created to design these pieces http://vimeo.com/10074976
by
DarioScapittaDesign
BLACK ROSE Ring is a part of an entire jewellery set in polyamide material. The collection includes necklace, armband, and earrings available in different size and colours.
Wearing those objects it is like to have just drawed roses up on your skin. The rose's silhouette is able to decorate the body with a touch of glamour; a very classic style reinvented with a chic and modern style.
BLACK ROSE ring is available also in different size. www.darioscapittadesign.com
