Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.

This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!

NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small

Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !

Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.

Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.

Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later. +

Show off your success (or someone else's) with this perfectly re-created sculpture based off the popular meme.

This is a 16mm to 24mm dice set modeled after the Deathly Hallows from Harry Potter.

The Black Strong & Flexible set (red background) was hand-painted using Spanish Copper and Gold rub'n'buff (sold separately).

Alumide set was dyed black and painted with silver enamel (sold separately).

Interlocking gears in a steampunk theme. These standard sized gear dice will keep your game turning (figuratively speaking, they do not actually turn...)

With percentile die.

A self-referential tessellation of the sphere.

This is a little delicate as the lines are 1.5mm thick, but it seems sturdy enough.

 Set of 17x 3D torpedo/missile markers suitable for space or air combat games such as Games Workshop's Battlefleet Gothic. This set of markers includes:

 - (2x) 1 torpedo markers
 - (2x) 2 torpedo markers
 - (4x) 3 torpedo markers
 - (2x) 4 torpedo markers
 - (2x) 5 torpedo markers
 - (4x) 6 torpedo markers
 - (1x) 7 torpedo marker

Torpedo markers come unpainted. For those who prefer a black undercoat, Black Strong & Flexible eliminates the need for black primer, as the material is matte and takes paint readily.

Any space ship models pictured above are from Games Workshop (and are obviously not included).

For more models in 6mm and 15mm scales, check out Anachron Games on Shapeways!

I've been a bit depressed that the tank i've been working on is to pricy to produce. But I got to thinking there is no reason why I couldn't make some other kind of vehicle I've always wanted to see on the table top. Well here we have my MK2 grav cycle. Its designed to fit in with existing bikes but be unique enough to stand out. I've scaled it to fit traditional "marines" Its price actually fell right where I expected it to, right near the cost of "Official" bikes. In future I'll have thin it down a bit to lower that cost and make a set of riding legs and arms for it so the Scythes of the Emperor can patrol in style. enjoy.

A sleek and nimble fighter, the Starfury has proven itself time and again over its many-centuries long service record. The Starfury is an evolution of the earlier Starfire fighter; with more powerful engines and greater fuel stores, the Starfury is better adapted for deep space naval combat.

Set contains 32 individual fighter models suitable for games such as Games Workshop's Battlefleet Gothic. Each model measures approximately 0.15" long.

Heavily armed and armored Voidhawk gunships are the workhorse of the marines. Whether defending the fleet against enemy attack craft or deploying marines straight into battle, the Voidhawk is tough enough to take a serious beating and still complete its mission.

Set contains 16 individual gunship models suitable for Games Workshop's Battlefleet Gothic.

The workhorse of the Imperial fleet, the Avenger bomber is a durable and reliable platform. The Avenger is optimized for delivery of various different warheads to the hull of enemy capital ships and serves its role well. This sturdy craft is famed for its steady attack runs in the face of defensive turret fire, withstanding severe punishment while the crew lines up a plasma torpedo or fusion bombing run.

Set contains 24 individual bomber models suitable for games such as Games Workshop's Battlefleet Gothic. Each model measures approximately 1/4" long.

Large Gothic space station. Bunch of naves, buttresses galore, everything you could want for your space monks.

This model includes the weapons and figures pictured above. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a double sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

Check out my blog: http://dynath40k.blogspot.com/ Engineers need tools, all the better if they are giant head sized wrenches and the repairs you're making are beating the enemy's brains in.

Check out my blog: http://dynath40k.blogspot.com/ This a small hefted hammer. This model may be shelled in future to lower printing costs.

10 pistols, designed to be used in 25-28mm scale wargames.

The handles are designed to be easily removed

This is a 4 pack of female Mining gang members. They carry laser pistols. Their height is actually 31mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a double sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

Check out my blog: http://dynath40k.blogspot.com/ A double bitted techno-axe with a plain head. it stands 22mm tall.

Check out my blog: http://dynath40k.blogspot.com/ A techno axe with a decorative head. it stands 22mm tall.

Check out my blog: http://dynath40k.blogspot.com/ A techno maul. Basically a futuristic beat'n stick. it stands 24mm tall.

This is a modular wall system for miniatures wargaming. This gothic-style structure can be assembled in many different ways, and will continue to be updated as I finish more. This selection includes four of each of two different wall sections, and two floors. It does require the addition of the columns and bases to work. The parts do not need to be glued, but can be press fit together with the floor sections floating, this will allow for varying the design game to game. I plan to do detail upgrades in the future, to include: lights, doors, column caps, destroyed pieces, and possibly some roofing sections.

Check out my blog: http://dynath40k.blogspot.com/ A hand marked by a halo. its designed primarily for the Angry Marines to bitchslap the empra's enemies. However its also a good banner topper or iron halo idea for those who want hand themed items. either way, enjoy.