A self-referential tessellation of the sphere.

This is a little delicate as the lines are 1.5mm thick, but it seems sturdy enough.

Step Twin - Stepped edge Die - a D6 die (dice) with stepped edges to compliment my 'Stepped corner D6' see; http://www.shapeways.com/model/156671/stepped_die_d6.html?gid=ug43177 .
This die has 18mm sides with 7mm tall numbers and 1.2mm stepping.

See also; http://www.shapeways.com/model/158405/stepped_die_d12.html?gid=ug43177 a D12 featuring stepping under the center of the numbers.

These filigree earrings look delicate almost like lace, yet are flexible and very resilient and should last you a life time assuming a monkey doesn't eat them. They are so light that you wouldn't even know you are wearing them.

Here they are shown in the "White Strong & Flexible" material, but are also available in other colors as well as silver. They are each about 1.5 inches long and .75 inch wide.

You type in text and we turn it into a customized metal 3D print. All objects on Shapeways are for decorative uses only.

- Lighter sold separately.
- The Lighter is a Cricket Electronic.
- Original lighter metal needs to be removed first.

If you are looking for a version that fits a different lighter go here: http://www.shapeways.com/model/111548/

A LEGO scaled version of the Master Sword, a blade featured in The Legend Of Zelda: The Wind Waker. Note: The hilt was altered slightly to look more like the original, hence it looks different on the new renders.

Build and customize your own Action Bot!- Modular, upgradeable, figure kit- highly poseable, snap-fit, ball joint construction! **This figure includes both knife and sheath accessories.** You can see a video showing how the figure assembles in the product pictures embedded above and a turnable 3d viewer of the model at- http://skfb.ly/5k4hedcb Enjoy!

You can customize the size (inner diameter) up to 18.2 mm. If you need a bigger one, please do not use this CoCreator but send me a message instead ! I will list it.
Ring on picture is printed in Stainless Steel.

You may have seen this model before, it's a free download at bathsheba.com.

Here it is straight from the artist.

This piece of art was created in 3D software by "printedCat" 3D-designer in San Francisco, California, USA and printed in nylon material by Shapeways.com in Holland or New York.

Enjoy watching!

All images are photos of real objects. "Proof Printed".

printedCat on Shapeways
printedCat.com
printedCat on Flickr
printedCat on YouTube
printedCat on Etsy
printedCat on Facebook

Product Name "Ring of the gamer". Designed by Japan.

Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.

The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.

Conversion chart for ring sizes

US Ring Size      Inside diameter
       8                         18.1mm
       9                         19.0mm
      10                        19.8mm
      11                        20.6mm
      12                        21.4mm
      13                        22.2mm

Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma

FORMA Laboratory Facebook Page!

 5cm Hoodie is the creation of Culprit art, you can check out his blog here: Culprit Toys and here Culprit Art , the pattern is from Jon Burgerman. 

Hoodie comes in many variations and can be found in the Dot San shop.

More Hoodies:
Burgerman Hoodies, 7cm, 5cm & 2cm

Plain Hoodies 
Red 7cm & 2cm
Green 7cm & 2cm
Blue 7cm & 2cm
White 7cm & 2cm
Black 7cm & 2cm

Customized 
Hibs Hoodie 7cm
Hearts Hoodie 7cm

The pattern, colours and size can be changed or even personalised, drop me an email at Dot San to discuss your requirements.

www.dotsan.com 

Let them know that you know that they're watching you. Perfect for soirées at the Soviet embassy.

Sorry, the joints aren't functional: Shapeways doesn't allow moving parts in metal. If that ever changes, you can bet I'll change the design!

Photos are of Sterling Silver (unpolished). I can't guarantee that they'll come out nicely in stainless steel, because I haven't tried it; some detail might get lost. (Let me know how it comes out if you try it!).

This is a game accurate replica of the Spanish Gold Coins that are featured Uncharted: Drake's Fortune. It was sculpted by me from in-game reference using ZBrush. This listing is for one coin only. NOTES ON THE PRINTS I got test coins printed in Gold Plated Glossy, White Strong & Flexible and Frosted Ultra Detail. You can find pictures of the GPG and WSF version above, however it was near impossible to get a decent picture of the FUD version. That said the detail on it is on par with the GPG version and definitely a step up on the WSF. For me though the pick of them all is the Gold Plated Glossy, it came out far far better than I could have ever hoped, the detail is great and it has a really nice weight to it as well. Hope you like this new item and keep an eye out for more soon.

A ribbon in space.
If you were wondering, it has two sides and therefore is not a Mobius strip.

Since this design looks best standing up, it has a mounting post that is 5/32" diameter. I would recommend a block of wood or blob of polymer clay as a base.

The bony skeletal structure of an origami paper crane. Created following the traditional crane model, for any lovers or the art of paper folding out there.

The detail is incredible, you can see textures and complex shapes even inside of the rib cage. The poor contorted crane has legs and feet, they are folded into its torso in true origami fashion. And vertebrae on the tail you say? What else did you expect?

Six 1:200 scale, detailed miniatures of the Grand Prix winning cars from the classic 1976 Formula One season.

McLaren M23 (James Hunt)
Ferrari 312 T2 (Niki Lauda, Clay Regazzoni)
Tyrrell P34 (Jody Scheckter)
Lotus 77 (Mario Andretti)
March 761 (Ronnie Peterson)
Penske PC4 (John Watson)

Suitable for use with the Formula D, Formula De, or Speed Circuit boardgames or any similar 1:200 scale racing games.
Or simply as a miniature display of six exquisite racing machines.

Sadly, these models cannot be printed in the strong and flexible nylon, as the details on the car wings is too fine to print accurately in this material.

4c9o virus [force nano virus]

Inspired by the intricate and beautiful shapes of viruses and bacteria.
Watch HD video above or check out some highres photo's.

Materials
Succesfully printed in White Strong & Flexible.
Dyed strong & flexible could is experimental and available per request.
A polished version is unlikely to survive the process.

History
The original model was created in 2006 for a 3d photo collage.
One of the goals was to create a life-like photograph of non-existent objects.
As, at the time, I was pretty sure this was an impossible to produce object.

Then I discovered shapeways ;-)
So now it was succesfully created in real 3d!

Specifications
It is solid to not compromise the design and the price difference was marginal.
Outer diameter is 8.5cm/3.3 Inch and the tips are 0.7 mm quickly becoming wider.
Which overall makes it quite sturdy.

Please be careful with unpacking though, it may be slightly tangled in the bubble wrap.
Then again, mine already survived a 1 meter/3 foot drop, however, I do not recommend that ;-)
It should be treated as a delicate decorative object, it is NOT a toy!

Beautiful ring, great as a present for the one you love.
This one has inner diameter of 18 mm and is made of silver.

Create your own size, just click on "Personalize" and we will prepare the rest.

Horse-s4

This warship draws on its glorious heritage and herculean crew to prevail against the enemies of the Pact. This model is available in 60mm and 90mm long versions; this one is the 90mm variant.

This model needs some post production assemble.
Please, watch the attached video and key moments of assembling process.

Replica of Wooden splinter Bird of Happiness

Bird of Happiness is the traditional North Russian wooden toy, carved in the shape of a bird. It was invented by Pomors, the inhabitants of the coasts of the White and Barents Seas. The Bird of Happiness is made without glue or other fasteners, by carving thin petals for the bird’s wings and tail and then using a special method of spreading and curving them, also found in other products of the North Russian handicraft. The amulet is usually made of pine, fir, spruce, or Siberian cedar. It is suspended inside a house, guarding the family hearth and well-being.
Source(s):
http://en.wikipedia.org/wiki/Bird_of_Happiness_(toy)

It is 16 cm in diameter

An alternative seashell.I'm very fond of my own instance of this design, and that doesn't happen often.A smaller version is here: http://www.shapeways.com/model/215947/whelk__10_5_cm_.html

A combination heavy warship and troop transport.

Knotcase

A Celtic inspired iPhone case.

The KNOTCASE snaps onto your iPhone 4 or 4S and provides a slimline case that covers the back and sides of your phone. The Knot pattern on the back give an appealing texture to touch and gives your iPhone a unique look.

Click here to visit our site

Or click here to keep up to date on Facebook