A delightful surface: the gyroid put through a simple inverse transformation. It's ellipsoidal on the outside, and there is a sphere taken out of the center, which is difficult to see; for otherwise it would be infinitely tiny inside, and therefore unprintable.

The Lotus top is a graceful form that embraces the upper body, accentuating the shoulders and clavicles. It's name comes from its unique design that blooms at the center opening, allowing the wearer to put her head through and rest it comfortably on the neck and shoulders.

A perfect fit requires a 3D body scan. Email Contact (at) ThreeFormFashion.com for more information on full service scanning and fitting.

This Voronoi network has the symmetry of a snub dodecahedron...almost. It is my homage to the wonderful diatoms of the world.

This is an iphone 4/4s case
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card holder, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. **

This Design has been printed and tested.. You can now safely purchase it.

I have several variations of this case that fit the iphone 5 and soon the Glaxy S3. I also have variations with kickstand and earbud organizers. Check out my store and have other features like kickstand. So if you like to see other models visit shapeways.com/shops/amznfx

**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
 the bikini Wallet

** metal piece for the bottle opener has been created but needs to be purchased SEPARATELY. it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.

Go to amznfx.com/shopping-cart

This is the same as Elephant Lovely but with a color shell.

Phamora Ceramics!

Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!

A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.

Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.


Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.

This little planter has been hit by a shrink ray! No, just kidding, it's based on the design of another one, but is 40% smaller. With this miniature wearable planter, you can carry a small plant or a small flower with you on your day's adventures. The much smaller size allows the production process to use considerably less plastic, which translates to a much smaller price. Unlike it's larger older sister, this wearable planter is made of an acrylic polymer. This material has a beautiful smooth finish and does not need to be painted like other necklaces I make that are made out of nylon. The material is inherently watertight as well! Like the other wearable planters, this one is created with the same modeling software and on the same style of 3d printer. This planter is an experiment with scale. It is made of the same acrylic polymer as the translucent planters, but is a much smaller size. This material is watertight, and acts as a perfect vase to carry a bud or a sprout on your day's adventures. Orders from Shapeways do not include a cord, if you would like a cord with your necklace, please buy one from my website www.wearableplanter.com.

This chess set re-imagines the bodies of the traditional chess pieces to incorporate each piece's name as the focal point of their design. It should be noted that each color/material must be ordered separately. This does, however allow for mixing and matching.

No2 in the series of 3D printed animal heads.

The Animal Head Collection.



No 1 is a Stag head. 

There is also a 75mm version here  and a 300mm version here 

No 3 is a Rhino. 

No 4 is a Tiger. 

Tiger Head 2. 

5 is an Elephant. 

I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination. The Zebra head works well, I've concentrated on only printing the black parts leaving the white empty. It is available in BSF  and WSF.  Both materials tell a different story.

Please send your pictures and share your thoughts on the design.

A self-referential tessellation of the sphere.

This is a little delicate as the lines are 1.5mm thick, but it seems sturdy enough.

Step Twin - Stepped edge Die - a D6 die (dice) with stepped edges to compliment my 'Stepped corner D6' see; http://www.shapeways.com/model/156671/stepped_die_d6.html?gid=ug43177 .
This die has 18mm sides with 7mm tall numbers and 1.2mm stepping.

See also; http://www.shapeways.com/model/158405/stepped_die_d12.html?gid=ug43177 a D12 featuring stepping under the center of the numbers.

These filigree earrings look delicate almost like lace, yet are flexible and very resilient and should last you a life time assuming a monkey doesn't eat them. They are so light that you wouldn't even know you are wearing them.

Here they are shown in the "White Strong & Flexible" material, but are also available in other colors as well as silver. They are each about 1.5 inches long and .75 inch wide.

You type in text and we turn it into a customized metal 3D print. All objects on Shapeways are for decorative uses only.

- Lighter sold separately.
- The Lighter is a Cricket Electronic.
- Original lighter metal needs to be removed first.

If you are looking for a version that fits a different lighter go here: http://www.shapeways.com/model/111548/

Build and customize your own Action Bot!- Modular, upgradeable, figure kit- highly poseable, snap-fit, ball joint construction! **This figure includes both knife and sheath accessories.** You can see a video showing how the figure assembles in the product pictures embedded above and a turnable 3d viewer of the model at- http://skfb.ly/5k4hedcb Enjoy!

A LEGO scaled version of the Master Sword, a blade featured in The Legend Of Zelda: The Wind Waker. Note: The hilt was altered slightly to look more like the original, hence it looks different on the new renders.

You can customize the size (inner diameter) up to 18.2 mm. If you need a bigger one, please do not use this CoCreator but send me a message instead ! I will list it.
Ring on picture is printed in Stainless Steel.

You may have seen this model before, it's a free download at bathsheba.com.

Here it is straight from the artist.

This piece of art was created in 3D software by "printedCat" 3D-designer in San Francisco, California, USA and printed in nylon material by Shapeways.com in Holland or New York.

Enjoy watching!

All images are photos of real objects. "Proof Printed".

printedCat on Shapeways
printedCat.com
printedCat on Flickr
printedCat on YouTube
printedCat on Etsy
printedCat on Facebook

Product Name "Ring of the gamer". Designed by Japan.

Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.

The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.

Conversion chart for ring sizes

US Ring Size      Inside diameter
       8                         18.1mm
       9                         19.0mm
      10                        19.8mm
      11                        20.6mm
      12                        21.4mm
      13                        22.2mm

Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma

FORMA Laboratory Facebook Page!

a small ball and socket character to play with and customize. Can be used with most famous bricks. Please be gentle when assembling the parts.  Any comments are welcome :)

Let them know that you know that they're watching you. Perfect for soirées at the Soviet embassy.

Sorry, the joints aren't functional: Shapeways doesn't allow moving parts in metal. If that ever changes, you can bet I'll change the design!

Photos are of Sterling Silver (unpolished). I can't guarantee that they'll come out nicely in stainless steel, because I haven't tried it; some detail might get lost. (Let me know how it comes out if you try it!).

This is a game accurate replica of the Spanish Gold Coins that are featured Uncharted: Drake's Fortune. It was sculpted by me from in-game reference using ZBrush. This listing is for one coin only. NOTES ON THE PRINTS I got test coins printed in Gold Plated Glossy, White Strong & Flexible and Frosted Ultra Detail. You can find pictures of the GPG and WSF version above, however it was near impossible to get a decent picture of the FUD version. That said the detail on it is on par with the GPG version and definitely a step up on the WSF. For me though the pick of them all is the Gold Plated Glossy, it came out far far better than I could have ever hoped, the detail is great and it has a really nice weight to it as well. Hope you like this new item and keep an eye out for more soon.

The bony skeletal structure of an origami paper crane. Created following the traditional crane model, for any lovers or the art of paper folding out there.

The detail is incredible, you can see textures and complex shapes even inside of the rib cage. The poor contorted crane has legs and feet, they are folded into its torso in true origami fashion. And vertebrae on the tail you say? What else did you expect?

A ribbon in space.
If you were wondering, it has two sides and therefore is not a Mobius strip.

Since this design looks best standing up, it has a mounting post that is 5/32" diameter. I would recommend a block of wood or blob of polymer clay as a base.