This set of 4 eggcups is printed on demand in laser sintered polyamide. The eggcup can hold a medium egg and due to the flexible nature of the printing material, it will adapt its shape to larger eggs as well.

The product will be shipped in standard Shapeways packaging and delivered within 10 working days.

Shipping costs vary upon destination, and will be calculated when checking out.

The available colors will vary by season and are therefore time limited.

Show off your success (or someone else's) with this perfectly re-created sculpture based off the popular meme.

Don’t let unruly wires get between you and your music. Pod à porter is the easiest way to wear your music, and it’s now available for the iPod shuffle 4th generation.

Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.

If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.

Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.

Some of the mentions of Pod à porter when it was originally released:

Wear your shuffle and nothing else...
gizmodo.com

Pod à porter, a 3d-printed iPod shuffle necklace
wired.com

Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com

Very smart.
joshspear.com

mocoloco.com

notcot.org

ilounge.com

design-milk.com

NY Times mentions Pod å`porter!
nytimes.com

No1 in the series of animal heads, a smaller version of the 570mm high Stag Head  (which is not available on Shapeways)

There is also a 75mm version here  and a 300mm version here 



The Animal Head Collection.





No 2 is a Zebra. 

No 3 is a Rhino. A large Rhino  is also available.

No 4 is a Tiger. 

Tiger Head 2.

Large Tiger Head.

No 5 is an Elephant. 

I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.

There are six regular convex polytopes in 4D, which are analogous to the five Platonic solids in 3D. This is the fifth, the hyperdodecahedron, a remarkably beautiful object brought to my attention by George Hart.

Here it's shown in a Schlegel diagram so you can see all 120 dodecahedral cells, though most are transformed by perspective: in this projection, the only regular dodecahedra are the biggest one on the outside and the tiniest one at the center.

A bigger model is here.

Nuke Lamp it's is a unique table lamp, its complex surfaces were created using real fluid dynamics simulations.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed  piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com  for shipping address.
Thank you.

A 3-dimensional version of the Hilbert space filling curve. As shown in the photos, if printed in one of the "Strong & Flexible" plastics, it can be used as a bracelet or hair accessory. It takes a little time to reform back as a cube after being stretched, but it seems that leaving it overnight does the job.

Both a tribute to ubiquitous, and lovely, hexagonal colour pencils, and a representation of what was coined by Joris Peels as 'combinatory manufacturing'.

Combine the connector piece with any set of 36 standard hexagonal pencils of about 7.0 mm cross section (measured at the smallest diameter). These types of sets are available around the world from many department stores and art supply stores - I’ve seen good sets for as little as 5 euro.

Examples of pencils that fit are Stabilo Aquacolor 1600, and Caran d’Ache Prismalo I, but there are many more. I’ve recently heard that in the US, Prismacolor Verithin Colored Pencils (available from Amazon and others) work well. Normal black pencils often have the same size and shape and can be used too.

If you are new to the Shapeways website: to order you will be asked to create an account (it's easy). Assembly may leave slight marks on pencils. For more information on this or other products, please visit www.michielcornelissen.com.

Type in your text and we turn it into a customized metal branding iron.

Does not include the lighter.
The lighter is a BIC World, Classic, Maxi.

Want to make your own? Download the lighter attachment part here: http://www.shapeways.com/model/121517/ Do not flip/mirror the image, ie. please upload one you want as the actual result of the branding. If you have trouble uploading image like invalid file type, please make sure the filename has extension, for example, .jpg

A sculpture. Contrary to popular belief, it is not an algorithmic object.

I created the skeleton of a skeletal Lepidoptera. The Death's Head Hawkmoth (Acherontia atropos), seen on The Silence of the Lambs , has a skull marking on its back. I made a full human-like bone structure for the moth, with the grinning skull protruding from its back.

The model is very thin, yet sturdy and flexible. Detail level is fantastic, and the natural texture of the 3d printing process gives it a bone-like appearance that works wonders.

Yes, moths don't have endoskeletons, that's the whole point...

A d6 die inspired by the Portal Companion Cube.
Order includes one d6.

Modeled in blender 2.59.

Please read the entire listing!

Reminiscent of Victorian filigree, this unique Designer iPhone 4 case is a durable and stylish alternative to mass produced cases on the market today. This is my newest design update! Now much more interchangeable this puzzle connection design is also more stylized and easier to put on and take off.

If you'd like each half a different color and/or design please go to my main page (www.shapeways.com/shops/cwestbrook) and order each half separately.

Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).

This puzzle style case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)

Click through the photos to see your color options.

The photos of the case in black highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!

*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY

Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.

I designed it for easy access to all buttons, ports and controls.

The colors available are what Shapeways currently offers.

*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.

*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case.

*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.


To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.

Why should your plants stay at home? They help clean the air you breathe, are beautiful, and create a wonderful conversation starter. Carry a sprout, a succulent, or a flower you found on your morning walk. When buying this wearable planter through Shapeways, your necklace will come unfinished and without a cord. You can add a silver or leather cord of your choice to your necklace, or you can email hello@wearableplanter.com and we will mail you a leather cord for your planter.

Kingdom: Animalia
Phylum: Mollusca
Class: Cephalopoda
Order: Octopoda
Suborder: Incirrina
Family: Octopodidae
Subfamily: Octopodinae
Species: Octopus vulgaris, the Common Octopus.

Members of the class cephalopoda are carnivorous hunters. They have the most advanced nervous system of all invertebrate animals and are an important example of advanced cognitive evolution in animals.

O. vulgaris is the most studied of all octopus species and possesses excellent eyesight, capable of distinguishing shapes, textures, and colour. It is the only animal which has been conclusively shown to use tools, and is proficient at learning simple processes such as unscrewing a jar.

Cephalopods are able to release dark pigment into the water as an escape mechanism, which in the past has been extracted and used by humans as an ink or dye. The word sepia comes from the Latin word for cuttlefish, s?pía.

The Ring:

This ring is made using 3D Printing.technology.
It is available in either stainless steel or silver.
It is available in sizes XS, S, M, L, XL. - ring size chart

This pendant features a mobius style spiral that can enclose a 6mm ball which jingles and jangles when worn.

If you'd prefer a right hand spiral, please see; http://www.shapeways.com/model/169011

NOTE:
Shapeways have decided that this model is unprintable with the ball enclosed.
This model will take a 6mm steel ball which can be fitted by gently forcing open the spiral... see video.
A 5mm ball is available here; http://www.shapeways.com/model/172759 or simply use a suitable (4.5mm-6mm) ball bearing.

A filler piece for Energon/Universe/RotF Superion, to fix its floppy chest. This version has indentations to allow for leg movement, at the cost of fuller looking hips, as well as the extra detailing for use in jet mode as in the Superion Filler 2. 

The first photo shows the Superion Filler 1 for reference.

This second photo shows the aforementioned Superion Filler 2. This version is functionally the same.

Working centrifugal compressor.

Designed to fit standard Mabuchi 130 motors.

Printed and tested.

Upon receiving the item, you'll need to use a 1.8mm drill bit to drill out the center hole. This is due to limitation of the printing process that may not allow the shaft of the motor to be inserted.

Ring in the form of an octopus.
Default ring size is 18.5mm (various sizes available).
Also available as bracelet.. Please contact us

A delightful surface: the gyroid put through a simple inverse transformation. It's ellipsoidal on the outside, and there is a sphere taken out of the center, which is difficult to see; for otherwise it would be infinitely tiny inside, and therefore unprintable.

...but not that cheap...

This is an iphone 4/4s case
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card holder, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. **

This Design has been printed and tested.. You can now safely purchase it.

I have several variations of this case that fit the iphone 5 and soon the Glaxy S3. I also have variations with kickstand and earbud organizers. Check out my store and have other features like kickstand. So if you like to see other models visit shapeways.com/shops/amznfx

**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
 the bikini Wallet

** metal piece for the bottle opener has been created but needs to be purchased SEPARATELY. it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.

Go to amznfx.com/shopping-cart

This is the same as Elephant Lovely but with a color shell.

Phamora Ceramics!

Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!

A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.

Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.


Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.

Using 30 standard-sized pencils, and this kit, you can create an icosahedron-shaped object of about 38 cm or 15 inch in diameter. Use it as a cool lampshade, or just as fun and educational object to have around.
Fits standard hexagonal (colour) pencils of about 7.0 mm cross section - measured at the smallest diameter. Any length of the pencils will work, as long as they're all the same.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).

Please note that the available colours are subject to what Shapeways offers, and may be different from those shown in the images here. Please refer to the support section for available colors. Assembly may leave slight indents on pencils.

This chess set re-imagines the bodies of the traditional chess pieces to incorporate each piece's name as the focal point of their design. It should be noted that each color/material must be ordered separately. This does, however allow for mixing and matching.

No2 in the series of 3D printed animal heads.

The Animal Head Collection.



No 1 is a Stag head. 

There is also a 75mm version here  and a 300mm version here 

No 3 is a Rhino.  A large Rhino  is also available.

No 4 is a Tiger. 

Tiger Head 2. 

Large Tiger Head.

5 is an Elephant. 

I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination. The Zebra head works well, I've concentrated on only printing the black parts leaving the white empty. It is available in BSF  and WSF.  Both materials tell a different story.

Please send your pictures and share your thoughts on the design.