by
elaverr
Drips: Modular Organic System #1
Collaborative project with Phil Renato & Richard Elaver. Multiple copies of six pieces snap-fit together to create a cascading form. Can be used to make jewelry, sculpture, or ...
Set includes 6 copies of 6 different pieces.
by
GHP
A great way of expressing longer sentiments - up to 244 characters with a 8cm diameter. Your text will be repeated as many times as it will fit (with at least 0.5cm separation between each repetition). Width of the band is 1.1cm, and the text height is ~0.5cm.
For a cheaper option, see my Mobius Text Napkin Ring (http://www.shapeways.com/model/182784/mobius_text_napkin_ring.html?gid=ug28511).
NOTE: It's possible that this isn't printable in stainless steel, as the wall thicknesses are below the recommended limit of 3mm for this material.
For a cheaper option, see my Mobius Text Napkin Ring (http://www.shapeways.com/model/182784/mobius_text_napkin_ring.html?gid=ug28511).
NOTE: It's possible that this isn't printable in stainless steel, as the wall thicknesses are below the recommended limit of 3mm for this material.
by
EyeLike2Cre8
cup volume approximately 60ml.
Teeth and eyes of snake are not as detailed as in 3D model because of the glazing but they are sufficiently detailed (for my opinion).
by
purligar
Build from a twelve-sided dodecahedron with TopMod,
the pentagons are linked to triangles and back again forming continuous paths.
The surfaces are shadowing each other resulting in very nice shadows.
To build a suspended lamp light bulb and socket has to be inserted trough a hole. Adapter ring for E27 bulb socket serves as fitting.
To build a table lamp take use of Starfish lamp stand with adapter ring.
This video shows how to assembly the light source.
To build a suspended lamp light bulb and socket has to be inserted trough a hole. Adapter ring for E27 bulb socket serves as fitting.
To build a table lamp take use of Starfish lamp stand with adapter ring.
This video shows how to assembly the light source.
by
ceramicwombat
The Kaleidoscope Clock is a two-part model for constructing a clock face. This is Part A of the model, the main frame of the clock. Part B is the background, numbers, and hands of the clock and is available at http://www.shapeways.com/model/580493
Each of the two parts of the clock is available in any of the Strong & Flexible colors, allowing you to create a clock face in the colors you prefer.
You will also need a clock movement. The kit is designed to be used with a high-torque clock movement available at http://www.clockparts.com/clock-part/high-torque-movement-aa-cell/
Part A of the kit is ready to use out of the bag. Part B is sprued and will need to be clipped apart with nail clippers or utility blade. Use a gel super glue to assemble the model. Don't use regular super glue as the Strong & Flexible material is porous and will absorb the glue. The gel variety of super glue does not soak into the material. Assemble the clock as follows:
1. Apply a tiny dab of gel super glue to the flange around each number and insert in the appropriate place on the frame of the clock face.
2. Apply a tiny dab of gel super glue to each of the intersection grooves on the background piece, line it up with the frame, and squeeze together momentarily at each intersection point. Err on the side of less glue.
3. Push the shaft of the clock movement through the hole in the frame, add the rubber and brass washers (included with the clock movement), and add and tighten the brass hex nut (also included with the movement).
4. (Optional) Apply an acrylic spray clearcoat to the assembled face and hands.
5. Push the hour hand onto the protruding white post on the clock movement. You don't need glue to attach the hour hand. It's designed to be snug.
6. Push the minute hand onto the brass post at the end of the movement and thread the brass cap nut (included with the clock movement) onto the post.
If you have any questions about construction of the clock after you receive Part A, Part B, and the clock movement, please contact me at chuck@madebywombat.com
Each of the two parts of the clock is available in any of the Strong & Flexible colors, allowing you to create a clock face in the colors you prefer.
You will also need a clock movement. The kit is designed to be used with a high-torque clock movement available at http://www.clockparts.com/clock-part/high-torque-movement-aa-cell/
Part A of the kit is ready to use out of the bag. Part B is sprued and will need to be clipped apart with nail clippers or utility blade. Use a gel super glue to assemble the model. Don't use regular super glue as the Strong & Flexible material is porous and will absorb the glue. The gel variety of super glue does not soak into the material. Assemble the clock as follows:
1. Apply a tiny dab of gel super glue to the flange around each number and insert in the appropriate place on the frame of the clock face.
2. Apply a tiny dab of gel super glue to each of the intersection grooves on the background piece, line it up with the frame, and squeeze together momentarily at each intersection point. Err on the side of less glue.
3. Push the shaft of the clock movement through the hole in the frame, add the rubber and brass washers (included with the clock movement), and add and tighten the brass hex nut (also included with the movement).
4. (Optional) Apply an acrylic spray clearcoat to the assembled face and hands.
5. Push the hour hand onto the protruding white post on the clock movement. You don't need glue to attach the hour hand. It's designed to be snug.
6. Push the minute hand onto the brass post at the end of the movement and thread the brass cap nut (included with the clock movement) onto the post.
If you have any questions about construction of the clock after you receive Part A, Part B, and the clock movement, please contact me at chuck@madebywombat.com
by
jasolo
Warning! This is a working prototype that needs some improvings (smoother borders, less width). The final version will be a customizable item where you'll be able to select the diameter, the texture and the location (for the sundial). Also, due to the roughness of this material, applying a lacquer is recommended.
This stylish bangle works also as a sundial just putting it on a table or hanging it. It has two holes and two graduated scales for the hours: Spring/Summer and Autumn/Winter. The two indentations between the holes allow to hang the bangle using a chain or cord. In the other extreme, the surface has some protuberances for getting a stable position when the bangle is put vertical on a table.
This stylish bangle works also as a sundial just putting it on a table or hanging it. It has two holes and two graduated scales for the hours: Spring/Summer and Autumn/Winter. The two indentations between the holes allow to hang the bangle using a chain or cord. In the other extreme, the surface has some protuberances for getting a stable position when the bangle is put vertical on a table.
by
sidnaique
May I help you? Sign, for offices, shops, airport, etc. This is a 12 inch version. Please visit my shop for more sizes. (Note: bolts not included)
by
elaverr
Trillium: Modular Organic System #3
Trillium is a modular building set. Individual elements snap-fit together in a variety of ways to create jewelry, sculpture, or ...
