by
fakebusker83
Version 4.0
A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.
It comes with 2 cannon/piledriver accessories.
You can also arm the Thugger with either Driller or Slammer accessories!
Radicon thread here.
Flickr gallery here.
A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.
It comes with 2 cannon/piledriver accessories.
You can also arm the Thugger with either Driller or Slammer accessories!
Radicon thread here.
Flickr gallery here.
by
fakebusker83
Version 1.6
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
by
fakebusker83
Version 4.5: Edited for peg locks to be sturdier.
Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!
This version is successfully tested on WSF and FUD.
Radicon thread here
Flickr gallery here.
Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!
This version is successfully tested on WSF and FUD.
Radicon thread here
Flickr gallery here.
by
fakebusker83
Version 1.5
A 5-pack of the hungriest pestilence found in the universe! Each scrapacius has a hinged jaw and ball-jointed neck joint. The legs are designed to grab onto 3mm diameter rods. Enjoys cuddling.
Each Scrapacius stands about 2cm tall.
This design is successfully tested in FUD and WSF. FUD is recommended to capture all the fine detail.
TFW2005 Radicon thread here.
A 5-pack of the hungriest pestilence found in the universe! Each scrapacius has a hinged jaw and ball-jointed neck joint. The legs are designed to grab onto 3mm diameter rods. Enjoys cuddling.
Each Scrapacius stands about 2cm tall.
This design is successfully tested in FUD and WSF. FUD is recommended to capture all the fine detail.
TFW2005 Radicon thread here.
by
fakebusker83
Version 2.0
A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.
The blades contain sharp edges and small parts, not suitable for children.
The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.
Click here to order only the blasters.
A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.
The blades contain sharp edges and small parts, not suitable for children.
The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.
Click here to order only the blasters.
by
fakebusker83
Version 3.0
Contains a pair of blasters and a grenade!
This model is tested successfully on White Strong Flexible.
This latest version has a re-reworked grenade that fits (even?) better in Wheeljack's bot and alt modes.
TFW2005 thread here.
Flickr gallery here.
Contains a pair of blasters and a grenade!
This model is tested successfully on White Strong Flexible.
This latest version has a re-reworked grenade that fits (even?) better in Wheeljack's bot and alt modes.
TFW2005 thread here.
Flickr gallery here.
by
fakebusker83
Version 2.5
Note: This version is the non-ported set. It does not have peg holes on the back fillers.
This is an upgrade set for the TF: Prime RID deluxe Knockout figure! In this set you will receive a pair of shoulders, a pair of back fillers, 1 paralyzer spear, 1 cutting saw and 1 trephinator drill accessory.
The shoulders replace the original, and they can fit nicely in alt mode. The back fillers can be pegged onto the sides of the car to act as booster rockets for Knockout. Let's face it, a bot like him needs speed as well as looks.
The saw and drill accessories have 5mm peg handles and can be held in the figure's fists, or they can also be mounted straight into his forearms.
This set is successfully tested in White Strong Flexible.
For the ported version with extra 5mm peg holes, click here.
TFW2005.com thread here.
Note: This version is the non-ported set. It does not have peg holes on the back fillers.
This is an upgrade set for the TF: Prime RID deluxe Knockout figure! In this set you will receive a pair of shoulders, a pair of back fillers, 1 paralyzer spear, 1 cutting saw and 1 trephinator drill accessory.
The shoulders replace the original, and they can fit nicely in alt mode. The back fillers can be pegged onto the sides of the car to act as booster rockets for Knockout. Let's face it, a bot like him needs speed as well as looks.
The saw and drill accessories have 5mm peg handles and can be held in the figure's fists, or they can also be mounted straight into his forearms.
This set is successfully tested in White Strong Flexible.
For the ported version with extra 5mm peg holes, click here.
TFW2005.com thread here.
by
fakebusker83
Version 3.0
"It's Seismus. The 'S' is silent."
Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.
There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.
Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.
This model is tested in White Strong Flexible.
Flickr gallery here.
TFW2005 thread here.
"It's Seismus. The 'S' is silent."
Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.
There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.
Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.
This model is tested in White Strong Flexible.
Flickr gallery here.
TFW2005 thread here.
by
fakebusker83
Version 2.0
This mace comes in two parts which you have to order separately from Shapeways. This is part B, consisting of the blades and attack spike. Printing in Transparent Detail or Frosted Ultra Detail is recommended.
Link to Megamace Part A.
Link to MegaFlail Part A.
This mace comes in two parts which you have to order separately from Shapeways. This is part B, consisting of the blades and attack spike. Printing in Transparent Detail or Frosted Ultra Detail is recommended.
Link to Megamace Part A.
Link to MegaFlail Part A.
by
fakebusker83
Version 2.0
This mace comes in two parts which you have to order separately from Shapeways. This is part A, consisting of the handle pieces and connector. Printing in Strong Flexible is recommended.
Link to Part B.
This mace comes in two parts which you have to order separately from Shapeways. This is part A, consisting of the handle pieces and connector. Printing in Strong Flexible is recommended.
Link to Part B.
by
fakebusker83
Version 1.0
A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!
You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!
A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!
You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!
by
fakebusker83
Version 2.0
A pair of mighty, tri-barreled blaster accessories for TF: Prime RID deluxe Cliffjumper! These are inspired by their appearance in the animated series, and offers a great compromise between playability and show-accuracy!
Version 2.0 has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr gallery here.
A pair of mighty, tri-barreled blaster accessories for TF: Prime RID deluxe Cliffjumper! These are inspired by their appearance in the animated series, and offers a great compromise between playability and show-accuracy!
Version 2.0 has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr gallery here.
by
Tom.B
---Update, Small parts have been added to a runner so the gun can now be made in Black Strong Flexible---A space aged Magnum pistol for your DX or Voyager Transformers. When assembled the pistol can open for reloading (see images).
by
fakebusker83
Version 1.5
Edit: Added spare fingers. Just in case!
A variant of the hands done for the Masterpiece Seeker figure, but this version has its wrist joint replaced with a ridged peg. The wrist peg is 5mm in diameter and peg section is 7mm long.
Edit: Added spare fingers. Just in case!
A variant of the hands done for the Masterpiece Seeker figure, but this version has its wrist joint replaced with a ridged peg. The wrist peg is 5mm in diameter and peg section is 7mm long.
by
fakebusker83
Version 1.0
A replacement head for the Generations War for Cybertron deluxe Cliffjumper figure! The model comes in 2 pieces; a head piece and a light pipe piece. Simply pop the latter into the back of the head piece and attach the whole thing to the figure's neck ball joint. No screws or adhesives needed.
This model is successfully tested on Frosted Ultra Detail.
A replacement head for the Generations War for Cybertron deluxe Cliffjumper figure! The model comes in 2 pieces; a head piece and a light pipe piece. Simply pop the latter into the back of the head piece and attach the whole thing to the figure's neck ball joint. No screws or adhesives needed.
This model is successfully tested on Frosted Ultra Detail.
by
Tom.B
A G1 Kickback-style blaster for your Fansproject's Backfiery. Includes 2 peg sizes, a 5mm for your Hasbro Transformers, and a 4mm for your Fansprojects figures.
by
Tom.B
A G1 Bombshell-style blaster for your Fansproject's Stormbomb. Includes 2 peg sizes, a 5mm for your Hasbro Transformers, and a 4mm for your Fansprojects figures.
by
fakebusker83
Version 1.5
Edit: I've added spare finger pieces in case any of your fingerjoints break during assembly. This happens when you are printing in Frosted Ultra Detail.
A pair of posable hands for the Masterpiece Seeker figure! This is compatible with MP-3 Starscream and all his subsequent repaints. Each hand has a wrist ball joint, thumb ball joints, and 4 individual posable fingers!
This model has been tested successfully with White Strong Flexible and Frosted Ultra Detail. FUD fingers have a 25% chance of breaking so please be careful during assembly.
Pegged wrist variant here.
Edit: I've added spare finger pieces in case any of your fingerjoints break during assembly. This happens when you are printing in Frosted Ultra Detail.
A pair of posable hands for the Masterpiece Seeker figure! This is compatible with MP-3 Starscream and all his subsequent repaints. Each hand has a wrist ball joint, thumb ball joints, and 4 individual posable fingers!
This model has been tested successfully with White Strong Flexible and Frosted Ultra Detail. FUD fingers have a 25% chance of breaking so please be careful during assembly.
Pegged wrist variant here.
by
Tom.B
A Transformers sized Plasma Cutter! Based on the Dead Space 2 design. For use with any DX transformer that needs to cut the arms and legs off some kind of horrible living nightmare!
by
Tom.B
A G1 Shrapnel-style blaster for your Fansproject's Thundershred. Includes 2 peg sizes, a 5mm for your Hasbro Transformers, and a 4mm for your Fansprojects figures.
by
Windblade-zero
his model its just a flipped version of the regular gatling gun i made days ago,
not all the transformers figures, have the same aesthetics, so i mirrored it because of that
no other changes were made.
for more information visist the original version page
by
Tom.B
A large cannon weapon perfect for DOTM Voyager Ironhide, Generations Warpath, or any DX Transformer in need of some fire-power. The cannon has four peg positions, and two pegs so you can position them wherever you like.
by
Tom.B
A set of 2 guns made just for Generations Warpath. The gun can work 3 ways. It can peg into Warpath's hand like a normal gun. It can collapse and be used when Warpath's hand is rotated inside the forearm. There is also a 3mm clip so the guns can attach to his tank mode.
This is not a toy, it's more like a garage kit. There might be some work to do, sanding the pegs so they fit nice and tight. With some materials there's always some size discrepancy from the 3D design to the printed material.
T
by
Tom.B
Here's the Ripper! Perfect for sawing horrid space Zombies into little piles of evil parts. A great weapon for any TF who loves to make a sickening mess out of things!
The Ripper folds up when not in use, just like the game model, or swings down for murder time! The handle can slide over to accommodate TF's with wider arms. But sadly this design wont work with all TF's. The top part of the handle is removable so it can be inserted into most 5mm TF's hands.
by
wheeljack
Transformers Wrecker Ironfist. Specifically designed to fit the DOTM Deluxe Ratchet figure. I highly recommend getting one of the detail prints. This one comes with NO bullet hole. Please Note: the custom picture shown above is "with" bullet hole.
by
fakebusker83
Version 5.0
“The Obliterator cannon is huge. Not just in terms of its physical size, but its focused fusion core warheads can penetrate the most hardened of bunker walls through sheer overwhelming levels of energy. Even though most commanders are competent enough to wield this monster of a weapon, only the most power hungry, egomaniacal generals choose the Obliterator as their signature weapon. It is as if no other weapon can provide them the rush of pure power that the Obliterator does.
It is even rumoured that some legendary warriors harness the dark matter from dying stars to boost their cannons to unimaginable levels of power, enabling them to destroy planetoids with a single hit. As with most rumours, claims of these capabilities are unsubstantiated.”
The Atomic Obliterator requires some assembly, and more adventurous customizers will find out that the space in the cannon allows for installation of an LED and a switch. Two handle pieces have been provided per set, and they can be mounted on sockets located front and rear of the cannon. An additional ‘fusion pistol’ is also included to round up the entire set.
The Obliterator is 10.8 cm long.
This model has been successfully tested in White Strong Flexible and Alumide.
You can get the 'Lite' version here. This version does not support LED installation and is simpler in construction.
“The Obliterator cannon is huge. Not just in terms of its physical size, but its focused fusion core warheads can penetrate the most hardened of bunker walls through sheer overwhelming levels of energy. Even though most commanders are competent enough to wield this monster of a weapon, only the most power hungry, egomaniacal generals choose the Obliterator as their signature weapon. It is as if no other weapon can provide them the rush of pure power that the Obliterator does.
It is even rumoured that some legendary warriors harness the dark matter from dying stars to boost their cannons to unimaginable levels of power, enabling them to destroy planetoids with a single hit. As with most rumours, claims of these capabilities are unsubstantiated.”
The Atomic Obliterator requires some assembly, and more adventurous customizers will find out that the space in the cannon allows for installation of an LED and a switch. Two handle pieces have been provided per set, and they can be mounted on sockets located front and rear of the cannon. An additional ‘fusion pistol’ is also included to round up the entire set.
The Obliterator is 10.8 cm long.
This model has been successfully tested in White Strong Flexible and Alumide.
You can get the 'Lite' version here. This version does not support LED installation and is simpler in construction.
by
fakebusker83
Version 2.0
This flail comes in two parts which you have to order separately from Shapeways. This is part A, consisting of the handle pieces, chain and spiked head. Printing in Strong Flexible is recommended.
Link to Part B.
This flail comes in two parts which you have to order separately from Shapeways. This is part A, consisting of the handle pieces, chain and spiked head. Printing in Strong Flexible is recommended.
Link to Part B.
by
ChaosIncarnate
War isn't always about weapons, and killing the other dudes. Equally important is kicking back with a cold one after a long day of kicking ass. I humbly submit the Soda Can 6-pack. With an external diameter of 5mm, your Transformers will enjoy relaxing with their comrades with a cool drink of Energon Ale.
Confirmed to be unprintable at this moment. I will fix and re-upload when able
by
Windblade-zero
this one has an spring loaded launching action but, for convenience, the model doesnt have it, but is meant to work with any pen spring.
this will be only released as a two pack.
parts are connected to ensure that none is lost
by
ChaosIncarnate
Like many of you, I have seen the comic insert for the Perfect Effect Not-Arcee, and that panel with the guns...that's cool. But her guns look nothing like that. So I modeled a couple cool guns that look like that. These use the standard 5mm pegs, and are nice and bulky, for that cool look. These have been printed and confirmed to look utterly badass.
by
Asphalt
A two headed flail for transformers figures.
by
exodigital
This set comes with all connecting stands and two bonus figures.
Different materials may have different tolerances. Models may need minor adjustments such as sanding.
Not for children. Adult Collectors only. Thank you.
Different materials may have different tolerances. Models may need minor adjustments such as sanding.
Not for children. Adult Collectors only. Thank you.
by
Windblade-zero
this is actually the same as the 2.0 but has a rotatory peg
and actually it wasnt that easy, since i had to make it strong enough
