Make your own slide-on macro lens for the iPhone 4 or 4S. I designed this for my iPhone 4 when I couldn't find the image quality I wanted for less than $60.

Print this model and then buy the glass lens for $4 from Surplus Shed (http://www.surplusshed.com/). The Surplus Shed part number is L4471. For some reason the search box on the Surplus Shed home page does not work with part numbers. To get to L4471, use the "Lens Finder". In the Lens Finder type:

Lens Type: PCX, Plano Convex
Diameter: 12mm to 12mm
Focal length: 51mm to 51mm

It will get you to L4471

The lens fits in a recess in the model and is held in place with a few tiny drops of Superglue. If you get any glue on the lens it can cleaned off with nail polish remover or acetone. The lens is plano-convex (one side is flat). When inserted in the holder, the flat side of the lens faces the phone.

Note that the lens fits pretty snugly into the opening. Try fitting the lens before applying any glue. A good technique is, with the lens holder laying face-down on a table, lay the lens in position, and then push it into the recess by poking the lens with the eraser-end of a pencil. Once you know the lens fits cleanly, push it back out and put two tiny drops of superglue on opposite edges of the opening. I use a toothpick to apply the glue because squeezing the superglue directly out of the tube risks putting on too much. Then push the lens back in the same way as in the test fit.

The object pictures in the photo gallery (dime, ruler, and watch) are unedited and uncropped shots directly from my iPhone4.

This model will not slide over iPhone cases.

Five intersecting tetrahedra with an icosahedron inside them.  There is just enough space between all the pieces that it will print as 6 separate objects.  The edge length of the tetrahedron is 7.5cm, it stands 8.6 cm high, about the size of a tennis ball.

Turn any photo you have into something very special and personal with the Full Color Photoshaper
The full Color Photo Photoshaper is available in 3 different sizes 10x7cm - 13x9cm - 15x10cm
this is the template of the 15cm x 10cm

SLEEPING SALTYPUS -is a playful salt cellar from deep down under...  
The perfect addition to any kitchen ,this unique design will surely spark a conversation.

Easy to use -the Saltypus slightly tilted stature makes for easy pouring, and eight tentacles allow him to sit stable on any kitchen surface. 

To refill- simply feed your sleeping saltypus from the bottom with fine grain salt of your choice.
Each Saltypus ordered through Shapeways is individually manufactured in a super durable and high quality, 3d printed polyamide with a fine surface texture (seen in above pictures). You can also select different Colors and material options which are shown at the bottom of this page. If you are new to the Shapeways : to order, you'll be asked to create an account.  Shipping is included in the price.

Thanks for taking the time to check out my design.  I hope you enjoy it.

Also keep an eye out for a PEPPER FISH companion soon to come! 

Please feel free to contact me with any questions regarding the design: 

brysonlovett@gmail.com

Loop has 3mm diameter hole, and wall thickness is ~1.5mm.

I made this sword to be decorative or used as a letter opener. Keep in mind you'll need to sharpen it if you want to use it as a letter opener.

I also thought of adding a leather looking strap to it. I however decided against it seeing as the strap would be very rigid even in flexible material.

A Simple Budha...