Scaled down version without the jaw of the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time.

[Note: This propeller propulsion add-on does not include a 3D printed Strandbeest, which should be bought seperately! This propeller does not fit the Ondula version!]

Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!

The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.

The 3D printed Strandbeest is sold separately.

A few tips to consider:

- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.

- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.

Skyrim pendant

I made a pendant inspired from the The Imperial Symbol of the game Elder Scrolls V: Skyrim. I hope people who love this game also love this pendant. On the top of the wings are two holes, so you can wear it like a pendant. The pendant is double sided, both sides look the same. The picture shows the wrong way ;-0

I already have pictures of the pendant in stainless steel pictures in stainless steel

Also check out my Skyrim 'Dragonborn' ring Skyrim 'Dragonborn' ring.

The pendant is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.

This is a fun gadget that you can have you in house to show your friends how the sphere was printed inside the rail and you can never detach it! http://www.shapeways.com/model/edit/605978/ [NEW] Buy the v2.0!: http://www.shapeways.com/model/108596/rail-with-a-ball-inside-keychain.html Buy the Keychain version

love hurts...but it's fashionable. Clip on back slides into pocket or hangs on pin. Can also be strung as a necklace. Depicting the beauty & pain associated with love… white symbolizing purity, red for passion, black for loss, & silver for reward. The trickle of blood symbolizes sacrifice. It was inspired by the irony of such conflicting emotions within the experience of a relationship.

A delightful surface: the gyroid put through a simple inverse transformation. It's ellipsoidal on the outside, and there is a sphere taken out of the center, which is difficult to see; for otherwise it would be infinitely tiny inside, and therefore unprintable.

The tale of the sneak eating it's own tail, where did it end?

Medium pendant available in multiple materials, displayed in Antique Bronze Glossy.

(Necklace not included.)

Inner diameter ~ 1,5cm
Outer diameter ~ 3,5cm
Depth ~ 1,2 cm

For robustness this version is not completely free floating like the sculpture
A smaller pendant is also available here.

The worst ear plug the internet has to offer. Use this size for gauges up to 1" in diameter. Designed with a slightly raised rim for a snug fit.

To Clarify: These earplugs are sold individually, not in pairs!

If you need a size larger than 1" diameter, please PM me and let me know what size you need. I'll want to scale up the hands and adjust the ring thickness accordingly to make sure it stays light enough to wear comfortably.

The printed copy shown is a 7/16" version printed in white detail material. I recommend this material, as it is more comfortable for wear and has a smoother look.

Make sure to specify a size in the Co-Creator Template, there is no standard size for this model!

For standard sizes up to 00 gauge, you'll want this model:
http://www.shapeways.com/model/213239/goatsearring_standard_gauges.html?gid=ug37365

The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. This is the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time. Large is approximately life-size. See pic of all 3 sizes together for comparison.