by
Psychobob
Every Team Fortress 2 Engineers must have tool; the Sentry Gun!
This model contains all the parts needed to build the "level 1" sentry gun (approximately 8cm x 6cm x 7.5cm from it's longest points). You can also purchase the parts necessary to upgrade this model to "level 2" and the final "level 3" from the links below.
Level 2
Level 3
The YouTube video linked demonstrates the assembly of all levels along with some additional information.
Please also consider visiting my website: www.psychobob.co.uk
PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".
DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.
This model contains all the parts needed to build the "level 1" sentry gun (approximately 8cm x 6cm x 7.5cm from it's longest points). You can also purchase the parts necessary to upgrade this model to "level 2" and the final "level 3" from the links below.
Level 2
Level 3
The YouTube video linked demonstrates the assembly of all levels along with some additional information.
Please also consider visiting my website: www.psychobob.co.uk
PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".
DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.
by
Psychobob
Every Team Fortress 2 Engineers must have tool; the Sentry Gun!
Been busy taking out enemies? Time to upgrade your sentry then to the it's most powerful state; Level 3!
This model contains parts needed to build the "level 3" sentry gun. You will also either need to have already purchased the parts for "level 1" and "level 2" or purchase them along with these parts before you can build the level 3 gun. Once assembled with the previous levels, the model will be approximately 9.5cm x 11cm x 9.5cm from it's longest points.
Links to the level 1 and 2 parts can be found below.
Level 1
Level 2
The YouTube video linked demonstrates the assembly of all levels along with some additional information.
Please also consider visiting my website: www.psychobob.co.uk
PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".
DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.
Been busy taking out enemies? Time to upgrade your sentry then to the it's most powerful state; Level 3!
This model contains parts needed to build the "level 3" sentry gun. You will also either need to have already purchased the parts for "level 1" and "level 2" or purchase them along with these parts before you can build the level 3 gun. Once assembled with the previous levels, the model will be approximately 9.5cm x 11cm x 9.5cm from it's longest points.
Links to the level 1 and 2 parts can be found below.
Level 1
Level 2
The YouTube video linked demonstrates the assembly of all levels along with some additional information.
Please also consider visiting my website: www.psychobob.co.uk
PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".
DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.
by
Psychobob
Every Team Fortress 2 Engineers must have tool; the Sentry Gun!
Been busy taking out enemies? Time to upgrade your sentry then to a more deadly version; level 2!
This model contains parts needed to build the "level 2" sentry gun.
You will also either need to have already purchased the parts for "level 1" or purchase them along with these parts before you can build the level 2 gun. Once assembled with level 1, the model is approximately 8.5cm x 10.5cm x 8.5cm from it's longest points. A link to the level 1 parts can be found below, along with a link to level 3 parts if you wanted to upgrade to the deadliest version of the sentry gun.
Level 1
Level 3
The YouTube video linked demonstrates the assembly of all levels along with some additional information.
Please also consider visiting my website: www.psychobob.co.uk
PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".
DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.
Been busy taking out enemies? Time to upgrade your sentry then to a more deadly version; level 2!
This model contains parts needed to build the "level 2" sentry gun.
You will also either need to have already purchased the parts for "level 1" or purchase them along with these parts before you can build the level 2 gun. Once assembled with level 1, the model is approximately 8.5cm x 10.5cm x 8.5cm from it's longest points. A link to the level 1 parts can be found below, along with a link to level 3 parts if you wanted to upgrade to the deadliest version of the sentry gun.
Level 1
Level 3
The YouTube video linked demonstrates the assembly of all levels along with some additional information.
Please also consider visiting my website: www.psychobob.co.uk
PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".
DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.
by
Psychobob
The portal pressure button! Key to any test chamber and it's also a stylish cup coaster when having some cake!
No need to paint this yourself, it comes fully coloured and textured!
I advise you to use some clear coat on the piece, so that the colours stay vibrant for longer. As people who have printed in FCS before may know, FCS colours can fade when wet and clear coat will help protect them.
I have been using mine for 3 weeks at the office where I go through at least 5 cups of tea a day, and with clear coat, it's remained in good condition.
Please also consider visiting my website: www.psychobob.co.uk
Disclaimer:
- The FCS finish is a little rougher than strong and flexible materials and can potentially scratch surfaces (i.e. wooden tops). I advise you to give the bottom of the piece and the bottom edges a light sanding with some fine sandpaper to remove the roughness to prevent scratching surfaces. If it's "frosty" after the sanding, you can use some clear coat and it should remove the frosting as well as protect the piece.
- When using clear coat, always apply a small amount to a discreet part of the model (i.e. the bottom) and let it dry thoroughly to ensure it does not react poorly to the material.
No need to paint this yourself, it comes fully coloured and textured!
I advise you to use some clear coat on the piece, so that the colours stay vibrant for longer. As people who have printed in FCS before may know, FCS colours can fade when wet and clear coat will help protect them.
I have been using mine for 3 weeks at the office where I go through at least 5 cups of tea a day, and with clear coat, it's remained in good condition.
Please also consider visiting my website: www.psychobob.co.uk
Disclaimer:
- The FCS finish is a little rougher than strong and flexible materials and can potentially scratch surfaces (i.e. wooden tops). I advise you to give the bottom of the piece and the bottom edges a light sanding with some fine sandpaper to remove the roughness to prevent scratching surfaces. If it's "frosty" after the sanding, you can use some clear coat and it should remove the frosting as well as protect the piece.
- When using clear coat, always apply a small amount to a discreet part of the model (i.e. the bottom) and let it dry thoroughly to ensure it does not react poorly to the material.
