by
JoshuaHarker
Scaled down version without the jaw of the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time.
by
joabaldwin
This is a mobius strip of Level 1 or Super Mario Bros. The whole level is wrapped around itself in a single surface, and poor Mario begins and ends at the same spot every time :(
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
by
TheoJansen
[Note: This propeller propulsion add-on does not include a 3D printed Strandbeest, which should be bought seperately! This propeller does not fit the Ondula version!]
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
by
Bathsheba
A Klein bottle.
Warning: this Klein bottle does not open beers, it just looks cute.
The Klein Bottle Opener is here on Shapeways or here on Bathsheba.com.
A bigger bottle is here.
Warning: this Klein bottle does not open beers, it just looks cute.
The Klein Bottle Opener is here on Shapeways or here on Bathsheba.com.
A bigger bottle is here.
by
MichielCornelissen
Don’t let unruly wires get between you and your music. Pod à porter is the easiest way to wear your music, and it’s now available for the iPod shuffle 4th generation.
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
by
TheoJansen
The first public evolution of the Animaris Geneticus Parvus, #5. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros". The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet.
- The best way to push it is by its nameplate. Do not push down, but forward
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet.
- The best way to push it is by its nameplate. Do not push down, but forward
by
henryseg
A 3-dimensional version of the Hilbert space filling curve.
As shown in the photos, if printed in one of the "Strong & Flexible" plastics, it can be used as a bracelet or hair accessory. It takes a little time to reform back as a cube after being stretched, but it seems that leaving it overnight does the job.
by
GothamSmith
Bicycle Chainring Cufflinks perfect for use in a French cuff shirt.
by
nervoussystem
A fine network of vessels defines the surface of this crescent-shaped pendant which was inspired by how veins form in leaves. The densely interconnected structure is at once airy and strong.
It is a part of Hyphae, a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge.
Watch the video below to see the the form was created.
--
If you are interested in purchasing the necklace with the chain, please buy from our website
nylon plastic version: http://n-e-r-v-o-u-s.com/shop/product.php?code=85
sterling silver version: http://n-e-r-v-o-u-s.com/shop/product.php?code=96
If you purchase directly from Shapeways it will not come with a chain.
by
colleenjordan
A small necklace to carry plants with you throughout the day. Works well with a small succulent planted inside, or fresh picked flowers. When this is printed in Shapeways' detail materials, it is watertight and can accommodate a plant with some water.
If you purchase this item from our Shapeways shop, please email hello [at] wearableplanter.com and we will send you your choice of leather or cotton cord to go with your necklace, as well as instructions on how to add plants.
by
stefdevos
This detailed model of the moon is hollow and therefore very price efficient. It will balance on a small gap on the bottom. You can also hang it on a wire using a bent paperclip. See video and images. Made for full color sandstone.
by
JoshuaHarker
love hurts...but it's fashionable. Clip on back slides into pocket or hangs on pin. Can also be strung as a necklace. Depicting the beauty & pain associated with love… white symbolizing purity, red for passion, black for loss, & silver for reward. The trickle of blood symbolizes sacrifice. It was inspired by the irony of such conflicting emotions within the experience of a relationship.
by
stop4stuff
This pendant features a mobius style spiral that can enclose a 6mm ball which jingles and jangles when worn.
If you'd prefer a right hand spiral, please see; http://www.shapeways.com/model/169011
NOTE:
Shapeways have decided that this model is unprintable with the ball enclosed.
This model will take a 6mm steel ball which can be fitted by gently forcing open the spiral... see video.
A 5mm ball is available here; http://www.shapeways.com/model/172759 or simply use a suitable (4.5mm-6mm) ball bearing.
If you'd prefer a right hand spiral, please see; http://www.shapeways.com/model/169011
NOTE:
Shapeways have decided that this model is unprintable with the ball enclosed.
This model will take a 6mm steel ball which can be fitted by gently forcing open the spiral... see video.
A 5mm ball is available here; http://www.shapeways.com/model/172759 or simply use a suitable (4.5mm-6mm) ball bearing.
by
MuseumofSmallThings
Kingdom: Animalia
Phylum: Mollusca
Class: Cephalopoda
Order: Octopoda
Suborder: Incirrina
Family: Octopodidae
Subfamily: Octopodinae
Species: Octopus vulgaris, the Common Octopus.
Members of the class cephalopoda are carnivorous hunters. They have the most advanced nervous system of all invertebrate animals and are an important example of advanced cognitive evolution in animals.
O. vulgaris is the most studied of all octopus species and possesses excellent eyesight, capable of distinguishing shapes, textures, and colour. It is the only animal which has been conclusively shown to use tools, and is proficient at learning simple processes such as unscrewing a jar.
Cephalopods are able to release dark pigment into the water as an escape mechanism, which in the past has been extracted and used by humans as an ink or dye. The word sepia comes from the Latin word for cuttlefish, s?pía.
The Ring:
This ring is made using 3D Printing.technology.
It is available in either stainless steel or silver.
It is available in sizes XS, S, M, L, XL. - ring size chart
Phylum: Mollusca
Class: Cephalopoda
Order: Octopoda
Suborder: Incirrina
Family: Octopodidae
Subfamily: Octopodinae
Species: Octopus vulgaris, the Common Octopus.
Members of the class cephalopoda are carnivorous hunters. They have the most advanced nervous system of all invertebrate animals and are an important example of advanced cognitive evolution in animals.
O. vulgaris is the most studied of all octopus species and possesses excellent eyesight, capable of distinguishing shapes, textures, and colour. It is the only animal which has been conclusively shown to use tools, and is proficient at learning simple processes such as unscrewing a jar.
Cephalopods are able to release dark pigment into the water as an escape mechanism, which in the past has been extracted and used by humans as an ink or dye. The word sepia comes from the Latin word for cuttlefish, s?pía.
The Ring:
This ring is made using 3D Printing.technology.
It is available in either stainless steel or silver.
It is available in sizes XS, S, M, L, XL. - ring size chart
by
Eeppium
A ring with crystals growing from it .
*Hole diameter 18,20mm* Size 8.
*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring
*Hole diameter 18,20mm* Size 8.
*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring
by
Wahtah
A Sierpinski tetrahedron, the 3D version of the Sierpinski triangle, stage 5 I think. There are 4096 of the smallest tetrahedrons. The model has 499994 faces.
Update:
The edges are now almost 18 cm (7 in) long and it stands about 14.5 cm (5.7 in) high.
The model has been updated because the smallest struts were a bit too small to be printed. So it's now 1.5 times bigger in all directions.
The pictures are of the previous smaller version, the new version has been ordered successfully a number of times in WSF.
I created the model using POVray and MeshLab.
Update:
The edges are now almost 18 cm (7 in) long and it stands about 14.5 cm (5.7 in) high.
The model has been updated because the smallest struts were a bit too small to be printed. So it's now 1.5 times bigger in all directions.
The pictures are of the previous smaller version, the new version has been ordered successfully a number of times in WSF.
I created the model using POVray and MeshLab.
by
virtox
The original Eardrops
A pair of elegant spiral droplet earrings.
Absolutely stunning in the new Premium Silver!
I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included)
These are availble at your local bijoux or jewellery store or via websites.
If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
More earrings
A pair of elegant spiral droplet earrings.
Absolutely stunning in the new Premium Silver!
I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included)
These are availble at your local bijoux or jewellery store or via websites.
If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
More earrings
by
TheoJansen
[Note: The seperate propeller does not fit the Ondula version! We are working on a propeller for the Ondula]
Theo Jansen’s 3D printed Strandbeest continues to evolve with an even more elaborate walking mechanism and a centipede-like walking motion. The latest evolution called 'Animaris Geneticus Ondularis' walks on twenty separate legs that move in a wave sequence. This new configuration results in a fluent walking motion, different from its twelve legged predecessors. It incorporates 122 moving parts, showcasing the complexity of mechanisms possible with 3D printed fabrication. It is also slightly larger than its predecessors. The operating principle of 'Animaris Geneticus Ondularis' is based on one of Theo Jansen's original beach walkers, the 'Animaris Ondula'.
Currently there is no propellor available for this version, it is being worked on though!
In the movie we used a piece of cardboard for walking on. Anything will do as long as it's a little rough for some friction!
Theo Jansen’s 3D printed Strandbeest continues to evolve with an even more elaborate walking mechanism and a centipede-like walking motion. The latest evolution called 'Animaris Geneticus Ondularis' walks on twenty separate legs that move in a wave sequence. This new configuration results in a fluent walking motion, different from its twelve legged predecessors. It incorporates 122 moving parts, showcasing the complexity of mechanisms possible with 3D printed fabrication. It is also slightly larger than its predecessors. The operating principle of 'Animaris Geneticus Ondularis' is based on one of Theo Jansen's original beach walkers, the 'Animaris Ondula'.
Currently there is no propellor available for this version, it is being worked on though!
In the movie we used a piece of cardboard for walking on. Anything will do as long as it's a little rough for some friction!
by
MINGLES
A LEGO scaled version of the Portal Gun, a weapon featured in Portal.
by
colleenjordan
This little planter has been hit by a shrink ray! No, just kidding, it's based on the design of another one, but is 40% smaller. With this miniature wearable planter, you can carry a small plant or a small flower with you on your day's adventures.
The much smaller size allows the production process to use considerably less plastic, which translates to a much smaller price. Unlike it's larger older sister, this wearable planter is made of an acrylic polymer. This material has a beautiful smooth finish and does not need to be painted like other necklaces I make that are made out of nylon. The material is inherently watertight as well!
Like the other wearable planters, this one is created with the same modeling software and on the same style of 3d printer. This planter is an experiment with scale. It is made of the same acrylic polymer as the translucent planters, but is a much smaller size. This material is watertight, and acts as a perfect vase to carry a bud or a sprout on your day's adventures.
Orders from Shapeways do not include a cord, if you would like a cord with your necklace, please buy one from my website www.wearableplanter.com.
by
fx2
You can customize the size (inner diameter) up to 18.2 mm. If you need a bigger one, please do not use this CoCreator but send me a message instead ! I will list it.
Ring on picture is printed in Stainless Steel.
Ring on picture is printed in Stainless Steel.
by
richgain
Inspired by the logo on the cover of Elbow's album, The Seldom Seen Kid, this interlocking 3-piece puzzle is not as easy as it looks. Unlike all my other cubes, which were created in Burr Tools, this puzzle was modelled by hand to give every one of the cubes a bevelled edge. This not only makes it look more like the Elbow logo, it also makes the puzzle even trickier to take apart.
by
mcode
This 3D printed Constructionist bracelet was inspired by modern architecture and its use of complex repetitive geometrical structures. I am fascinated by how these structures can behave to create buildings and objects that look seemingly organic and unique, buildings that change their appearance depending on the angle you look at them. This inspiration has resulted in this collection of intricate and elegant cuffs and bracelets, that change their appearance constantly as you move and wear them.
This bracelet is an example where new techniques like 3D printing has opened up a world of new design possibilities -this bracelet would be almost impossible to make using traditional jewellery techniques.
Size: Medium (6,5cm / 2,6in opening which is 20,5cm / 8in inner circumference). See my other listing for size Large, or let me know if you would like another size.
by
arthurditlef
ARTIFICIAL NATURE SERIES
Inspired by Nature, with an artificial twist.
Inspired by Nature, with an artificial twist.
by
COVO
Product Name "Brick Ring". Designed by Japan.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
The brick can be attached by all the sizes.
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
The brick can be attached by all the sizes.
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
by
Ammnra
Ring based on Portal 2 Space Core
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
by
SheilaMunro
Beautifully designed Dragon Claw Bracelet. Inner circumference is 17 cm. Inner Diameter is approximately: 56mm Distance between claws is: 25.5 mm. Wearable on the forearm as well. Small version. Please contact for a custom size, also currently available in MEDIUM & LARGE. Please DO NOT try to bend open with metal prints to avoid any risk of injury! The metal will not bend, this is a strong, sturdy bracelet in metal. If these sizes will not fit you I will make a custom size no extra cost. ancienteyes@shaw.ca
by
Bathsheba
A Merkaba, 9cm from tip to tip. (That's about 3 1/2", for us groundlings.)
by
MichaelMueller
A ssssnake... well, to be honest, not my favorite type of animal...
but a little, clever snake-pet would be nice...
living winded around a finger of my hand...
eating annoying mosquitoes and biting bad people!
The default Ring Size is US 6.5.
Use one of the following links to choose another ring size.
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 7.5
Inside Diameter: 17.73 mm / 0.698 in
Inside circumference: 55.70 mm / 2.19 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
US Ring Size 15
Inside Diameter: 23.83 mm / 0.938 in
Inside circumference: 74.80 mm / 2.95 in
Other size needed? Just send me a message!
but a little, clever snake-pet would be nice...
living winded around a finger of my hand...
eating annoying mosquitoes and biting bad people!
The default Ring Size is US 6.5.
Use one of the following links to choose another ring size.
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 7.5
Inside Diameter: 17.73 mm / 0.698 in
Inside circumference: 55.70 mm / 2.19 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
US Ring Size 15
Inside Diameter: 23.83 mm / 0.938 in
Inside circumference: 74.80 mm / 2.95 in
Other size needed? Just send me a message!
by
MichaelMueller
This is a full working tabacco pipe. The head is made with glazed ceramics, the mouthpiece is antique bronze glossy.
+ 
A pipe is definitely a matchmaker. It makes you look distinguished and sexy. Like a successful scientist, a confident playboy or an experienced sailor.
Yeah, tabacco is bad for your health, so use bubbles instead! Works even better cause it gives you a great lemon flavour, but this depends on the dish soap you use. The ladys will appreciate it!
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself! You can find the mouthpiece here.
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
+
A pipe is definitely a matchmaker. It makes you look distinguished and sexy. Like a successful scientist, a confident playboy or an experienced sailor.
Yeah, tabacco is bad for your health, so use bubbles instead! Works even better cause it gives you a great lemon flavour, but this depends on the dish soap you use. The ladys will appreciate it!
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself! You can find the mouthpiece here.
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
by
hdrop
Mech Silver Skull Ring
A highly detailed skull ring with a mechanical twist.
Looks great in both silver and stainless steel.
The rings band is only around 1.5 mm thick for wearing comfort.
You can personalize the size of this ring by clicking the "personalize" button on the right.
Then choose the diameter that fits you.
US Ring Size Inside diameter
7 17.3 mm
8 18.1 mm
9 19.0 mm
10 19.8 mm
10 1/4 20 mm
11 20.6 mm
12 21.4 mm
You can order any US ring size between 8 and 12. Please specify the size you want in the "Note to the designer" field. I need both the US ring size and the inner ring diameter in millimeters. Please order larger sizes here.
Check out my other skull ring designs!
A highly detailed skull ring with a mechanical twist.
Looks great in both silver and stainless steel.
The rings band is only around 1.5 mm thick for wearing comfort.
You can personalize the size of this ring by clicking the "personalize" button on the right.
Then choose the diameter that fits you.
US Ring Size Inside diameter
7 17.3 mm
8 18.1 mm
9 19.0 mm
10 19.8 mm
10 1/4 20 mm
11 20.6 mm
12 21.4 mm
You can order any US ring size between 8 and 12. Please specify the size you want in the "Note to the designer" field. I need both the US ring size and the inner ring diameter in millimeters. Please order larger sizes here.
Check out my other skull ring designs!
