Show off your success (or someone else's) with this perfectly re-created sculpture based off the popular meme.

Nuke Lamp it's is a unique table lamp, its complex surfaces were created using real fluid dynamics simulations.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed  piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com  for shipping address.
Thank you.

The Earth, Moon, and Mars, to scale, with 3D surface terrain and full color from the latest NASA space imaging.

[See also the solar system set (but note that set is a logrithmic scale, not linear like this one)]

Dimensions:
Earth: 50mm (2 inches) diameter
Mars: 27mm (1 inches) diameter
Moon: 13mm (0.54 inches) diameter

Scale: 1 : 251102362

The Earth and Mars globes are hollow, with a 12mm (1/2 inch) hole at the south pole, giving them a flat bottom on which to sit without rolling, but each also comes with a matching cap/plug to seal that hole, to form a full sphere. (The moon is solid)

Special thanks to NASA / JPL-Caltech, for allowing the use of their planet surface terrain and mapping.

I've been a bit depressed that the tank i've been working on is to pricy to produce. But I got to thinking there is no reason why I couldn't make some other kind of vehicle I've always wanted to see on the table top. Well here we have my MK2 grav cycle. Its designed to fit in with existing bikes but be unique enough to stand out. I've scaled it to fit traditional "marines" Its price actually fell right where I expected it to, right near the cost of "Official" bikes. In future I'll have thin it down a bit to lower that cost and make a set of riding legs and arms for it so the Scythes of the Emperor can patrol in style. enjoy.

SCALE 1:275

Designed for use with 25/28mm gaming figures.

Workhorse of the eastern alliance bomber pilots, freedom for the galaxy! freedom for the hairy wikis, freedom for the crinkly yodis! they cry. (though its the humans who seem to be doing the work for everyone else in the galaxy, oh well...) ***UPDATE*** shapeways found an issue with the laser emitters (see pictures above) which caused a couple of orders of this model in frosted detail to be cancelled and refunded. My apologies if this caused any inconvenience. I have now fixed that issue, also added more detail, optimised it further and dropped the price. Thanks for your support:) any comments, suggestions q's feel free to comment below.

A powerful defensive fighter craft, by popular demand scaled up for use in the SW Xwing board game. Pack includes 3 fighters with 2mm mounting holes Additional: (15/03/2013) Due to an issue with a 'drainage hole' being marginally too small, shapeways have rejected a couple of prints ordered, specifically only in WSF. I have updated the model with a slightly widened hole which does not impact the look of the model (see the rotating 3d preview) if you've had a WSF order cancelled (other materials seem fine) feel free to order again, apologies for the delay.

Works in WSF but details will show better in frosted detail. Comes with three main guns and an Ion turret

Works in WSF. But Frosted detail will emphasize the detailing better

The perfect cargo container for starfighter collisions! It is Way better than rocky asteroids. Sadly this model is big, even if it is completely hollow it still has a lot of mass in the walls. It is 6x3x2cm so you can usi it with your favorite Star Battles game, with 15mm sci-fi miniatures or even as cover for 28mm sci-fi miniatures.

---

Want to get a set?

+ +


+

1 peice miniature spaceship

Works in WSF. But Frosted detail will emphasize the detailing better

These miniature pipe connectors are made to be used with 1.6mm (1/16") plastic or brass rod, to create your own pipe network.

Message me if you would like different sizes, or have any special requests.

**Recommend printing using Frosted Ultra Detail

SCALE 1:275 UPDATE: Even if this model was tested several times, during one printing process the model apparently had problems. Ive updated the model so there is no chance this could happen again. Sorry for any possible inconvenience.

Simple 1" globe of the earth, no painting required. Printed in color, hollow with a 1/8" hole in the bottom to put on figure base. Perfect for use in any tabletop space game.

This is the first in an upcoming set of game-ready planets for startship combat games.

Image is courtesy NASA: Reto Stöckli, NASA Earth Observatory, BLUE MARBLE NEXT GENERATION W/ TOPOGRAPHY AND BATHYMETRY

Large Gothic space station. Bunch of naves, buttresses galore, everything you could want for your space monks.

Agent 47's tie clip. Don't ask me how I got it.

Check out my blog: http://dynath40k.blogspot.com/ In future a shelled version for printing in FUD, possibly a 10 up set, maybe removal or revision of the long wing plates. A pair of two headed eagle shoulder pads designed for my Legio-Custodes project. They are ideal for officers so I've put them out in a pair to start. If the test prints go well I'll produce a x5 up squad set. I'm worried that the beak and talons will have a wall thickness error on WSF but it will definitely print in FUD. The thin plastic rods are a feather fringe that mounts under the shoulder pad dropping down low to cover the arms as a decorative element. They are segmented so you can cut them apart and position them to match the figure's pose. It was an element i thought up that I've wanted to do for a while so I added it to this design as it fit it so well.

Works in WSF. But Frosted detail will emphasize the detailing better

Check out my blog: http://dynath40k.blogspot.com/ A set of techno varients of traditional samurai weapons including Katana, Wakizashi, and Tanto, includes both in and out of scabard.

SCALE 1:275 UPDATE: Even if this model was a few times, during one printing process the model apparently had problems. Ive updated the model so there is no chance this could happen again.

This is an industrial walkway with railings that fold down. Any gamers that live in an apartment know it's hard to keep any amount of terrain around without it getting crushed or pissing off your room mates. With the railings folded down it is 1cm high. This piece of terrain is designed for use with any 28mm game you see fit. When you receive your walkway, the railings may not be centered as they are in the video and pictures. EASY FIX! Just fold your railings all the way out and you will be able to gently guide them through the supports to their centered position. One of the images shows a miniature for scale but it is not included with this model.

This is used to create scenery for wargames or models. Build your own vertical walls out of MDF, foamcore, or the like, and add these for detail.