by
RemivanOers
CLIP-IT for iPhone
Your charge buddy on the go.
Clip-it for iPhone converts your Euro iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it lets you wind the usb cable easily around your charger while taking it with you.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock the cable at the bottom. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (European version).
After all the excitement, an US version of Clip-it is available here!
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
Your charge buddy on the go.
Clip-it for iPhone converts your Euro iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it lets you wind the usb cable easily around your charger while taking it with you.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock the cable at the bottom. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (European version).
After all the excitement, an US version of Clip-it is available here!
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
by
RemivanOers
CLIP-IT for iPhone -US edition-
Your charge buddy on the go.
Clip-it for iPhone converts your iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock it by clipping it to your charger. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it US is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (US version).
The European version of Clip-it is available here.
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
Your charge buddy on the go.
Clip-it for iPhone converts your iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock it by clipping it to your charger. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it US is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (US version).
The European version of Clip-it is available here.
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
by
BITGEM
Privacy screen for your laptop webcam. Just clip it on when you don't want to be spied upon! Fits most sizes from thin to medium thick laptop screens.
by
CW&T
iPad analog amplifier accessory.
This is for the 1st generation iPad. It fits snuggly onto the corner and pipes the speaker output through the horn to amplify the sound. It works!
The Strong & Flexible material is super strong and can be handled pretty roughly.
This is for the 1st generation iPad. It fits snuggly onto the corner and pipes the speaker output through the horn to amplify the sound. It works!
The Strong & Flexible material is super strong and can be handled pretty roughly.
by
BITGEM
This is a little clip that covers the camera on your iMac when you don't want to be spied upon. The microphone is not obstructed. It clips on easily and can easily be removed or just slid to the side. The cover fits generation 6 iMac machines.
by
pedrostein
Don't want to be spied over your own laptop webcam hijacked by some unknown peeping Tom? Protect your privacy by simply slipping this cover over your cam. Works for laptop's and netbooks with a lid thickness of 13-14mm.
Please measure the thickness of your laptop lid before you purchase this item. Check for more infos: http://camtect.com
by
RemivanOers
Multipack x10
CLIP-IT for iPhone Lightning US
Your iPhone 5 charge buddy on the go.
This is a multipack offer of 10 units of the US version of Clip-it Lightning
Clip-it for iPhone converts your iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
CLIP-IT for iPhone Lightning US
Your iPhone 5 charge buddy on the go.
This is a multipack offer of 10 units of the US version of Clip-it Lightning
Clip-it for iPhone converts your iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
