by
chamoo232
DIY kit of Portal 2's iconic Turret. The kit need some assembly and is not in color. I designed it in pieces si it would be much easier to paint. Since it's in pieces it require glue and a pointy tool to clean the compacted powder from the antenna and back leg hole is also suggested. Once assembled it stand about 15 cm tall.
by
Ammnra
Replica of the Shard of Eden inspired by Assassin's Creed 3
The Shard of Eden in the main picture was printed in Stainless Steel.
Ring comes in one size only and is designed to be worn around your neck on a chain/necklace (or on a finger if it fits, US size 7~8).
The Shard of Eden in the main picture was printed in Stainless Steel.
Ring comes in one size only and is designed to be worn around your neck on a chain/necklace (or on a finger if it fits, US size 7~8).
by
Thundrknight
Hyrule Armor For Those Strolls down termina field.
a sleek cool looking brace for those fans of the series looking for something new for your collection, wearable collection that is !
by
Calistotash
She's colourful, she's fast, and she'll always be loyal; sat on your shelf. Model has been adjusted to have the tail connected to a back leg. This makes it more sturdy to print.
by
chosetec
This centipede has hinged legs, body segments, and antennae; it is fully posable. The sculpture is inspired by the "jizai okimono" of Meiji-era Japan, which were fully posable handmade metal figures of real creatures.
by
sevensheaven
The legendary Apple Macintosh computer, executed as a 3D pixel art style pen / business card holder for your desk or cupboard, created exclusively by the Dutch Sevensheaven design studio. Of course, anything you like can be deposited in the tray, even a small plant. The back side is the same as the front side, with the nostalgic, iconic Mac features. A great gift for anyone who loves retro computing.
If you like Apple nostalgia, be sure to check out the 3D pixel art style busts of Apple founders Steve Jobs and Steve 'Woz' Wozniak, also available from the Sevensheaven 3D print store.
UPDATE: model updated with lighter color. The previous version was saved with a gamma-corrected color, which appeared lighter in the 3D editor than in reality.
by
Calistotash
She's courageous, plucky, and loves to go on an adventure! Ready for anything; but is she ready to face the next challenge? Your shelf?
by
MichaelMueller
This pendant looks magical ...
In fact, I'm pretty much almost sure, that it do not magic for real! If it does, please send me a message, telling how many hearts were charmed or how much gold and diamonds were conjured with it.
If so, I'll print immediately another one for myself. Mine does not magic at all, guess it's broken.
In fact, I'm pretty much almost sure, that it do not magic for real! If it does, please send me a message, telling how many hearts were charmed or how much gold and diamonds were conjured with it.
If so, I'll print immediately another one for myself. Mine does not magic at all, guess it's broken.
by
ChrisArtscapes
My version of an elven sword
This sword has a fine edge and is quite sharp.
This sword has a fine edge and is quite sharp.
by
Odolyte
Beautifull Retro-Rocket (Flash Gordon would have been a huge fan !)! Perfect in different metal texture (we love the gold plated matte or glossy material !).
Let's have something special on your desk ! If you put our retro rocket on your desk, we bet that every person coming in your office will crave to touch it ! We've already tried ;)
This our small size model (6 cm high). This model also exists in medium and big size...
Let's have something special on your desk ! If you put our retro rocket on your desk, we bet that every person coming in your office will crave to touch it ! We've already tried ;)
This our small size model (6 cm high). This model also exists in medium and big size...
by
CustomBitz
A collection of several fantasy coins in various shapes and sizes. All have a vaguely chinese themed "hollow coin" design. If you'd be interested in a custom set, feel free to message me!
by
BITGEM
Add a little cartoony cuteness to your life :)
by
BITGEM
Look, it's Beautiful Squidward! Do you know someone who deserves this trophy?
by
MichaelMueller
Owls are great! Incredible creatures, fearless nighthunters...
OK, the one on this buckle has some kind of squint but hey, nobody is perfect! ... Not me, not you, not even Angelina Jolie. OK, she is amazing, so let's say she is really close to perfection! What was it about? Ah right, Owls: great birds!
This buckle is "ready to use", all you need is a belt.
Diameter of the buckle ... 6 mm
OK, the one on this buckle has some kind of squint but hey, nobody is perfect! ... Not me, not you, not even Angelina Jolie. OK, she is amazing, so let's say she is really close to perfection! What was it about? Ah right, Owls: great birds!
This buckle is "ready to use", all you need is a belt.
Diameter of the buckle ... 6 mm
by
MichaelMueller
This is the mouthpiece for the Skull Tabacco Pipe.
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself!
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself!
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
by
DJGietzen
The famous White Lotus tile for use in the board game Pai Sho, as seen in Avatar: The Last Air Bender.
by
Ikariya
Coin inspired by the 'Heaven' token in Panty & Stocking with Garterbelt. You can print in white plastic or in gold plated glossy.
I recommend the white detail so you can paint it later.
I recommend the white detail so you can paint it later.
by
Auram
Main body of the Mass Relay from the Mass Effect series. The Mass Relays are used to travel between Galaxies in the game, by both friends and foes! Using the in-game model as a base, this has been smoothed considerably prior to uploading
Main Body: http://www.shapeways.com/model/618246/mass-relay-body.html?li=shop-inventory
Gimbal Rings: http://www.shapeways.com/model/618254/mass-relay-gimbal-rings.html?li=shop-inventory
Antennas: http://www.shapeways.com/model/618268/mass-relay-antennas.html?li=shop-inventory
(note: some of the antennas are too small to print, but can be made from wire, piano string, brass tubing, or any number of easy to find materials)
by
Innovo
The Mini Crowbar is both a decorative as well as practical keychain accessory (a bit larger than a typical key). It can be used for screwing, puncturing or as a keychain hanging hook.
Available in several finishes and materials (Stainless Steel, Antique Bronze Matte, Antique Bronze Glossy, Gold Plated Matte, Gold Plated Glossy). Please choose from the right.
Warning: This crowbar is size medium, about 30% larger than the small one. Pictures shown represent the small crowbar version.
by
Ammnra
Like a leaf on the wind.....
Pendant/Keychain inspired by the Wanderer's scarf from the video game Journey produced by That Game Company
ATTENTION: The Pendant in the main pic was printed in sliver. It was then distressed with black paint and has a ball chain and connector added. The part you receive from Shapeways will NOT. It will be one solid color. You will need to do your own distressing and add your choice chain and connectors.
Video Painting/Distressing Instructions
Protoype was printed in Gold Glossy. Then the tops and the edge details were lightly sanded to remove the gold coating revealing the stainless steel base material. Then it was then distress with black paint.
Want more than one? - Save money and get the Earring Set instead
Pendant/Keychain inspired by the Wanderer's scarf from the video game Journey produced by That Game Company
ATTENTION: The Pendant in the main pic was printed in sliver. It was then distressed with black paint and has a ball chain and connector added. The part you receive from Shapeways will NOT. It will be one solid color. You will need to do your own distressing and add your choice chain and connectors.
Video Painting/Distressing Instructions
Protoype was printed in Gold Glossy. Then the tops and the edge details were lightly sanded to remove the gold coating revealing the stainless steel base material. Then it was then distress with black paint.
Want more than one? - Save money and get the Earring Set instead
by
Sammael
SPARTA HELMET RING
A large, simple and yet beautiful Spartan look ring, with little battle damages. .
.
Designed for Antique Bronze (Matte or glossy), but I think it will look good printed in every metal material.
Standard size have an inside diameter of 20,2mm.
Links to other sizes :
Size 8 (18.1mm)
Size 9 (19mm)
Size 10 (19.8)
Size 11 (20.6mm)
Size 12 (21.4mm)
Size 13 (22.1mm)
The first picture is textured with a noise bump to preview the printed steel surface.
A large, simple and yet beautiful Spartan look ring, with little battle damages. .
.
Designed for Antique Bronze (Matte or glossy), but I think it will look good printed in every metal material.
Standard size have an inside diameter of 20,2mm.
Links to other sizes :
Size 8 (18.1mm)
Size 9 (19mm)
Size 10 (19.8)
Size 11 (20.6mm)
Size 12 (21.4mm)
Size 13 (22.1mm)
The first picture is textured with a noise bump to preview the printed steel surface.
by
AbhorNomus
Life-sized replica of Amon's mask from The Legend of Korra.
This mask is quite thin and flexes easily. If it arrives warped, it can easily be gently twisted back to its intended shape.
This is the smaller version of the mask and is better suited to shorter individuals. The mask measures 23.3cm tall. It is not a child's size mask.
Dimensions: 15.894 w x 23.302 d x 7.234 h (cm)
Dimensions: 15.894 w x 23.302 d x 7.234 h (cm)
by
paulelderdesign
The item you are viewing is a full scale replica key from the film The Fifth Element.The Dimensions are approximately 33mm long by 50mm high at the keys head. If you like you can trim the keys shaft to 14cm which is the scale used in the film I made it longer for printing purposes. As a fan of the film I got this as accurate as I could without going below the min 0.8 mm depth. I recommend ordering this in gold or brass from the options to the right. Enjoy :)
by
ChrisArtscapes
A full sized Katar replica that I made.
For decorative purposes only.
For decorative purposes only.
by
replicaprops
The symbols represent the 4 elemental powers water, fire, earth and air.
the main body is 2mm thick
by
roko25
please leave comments.
any model you are looking for let me know I'll be happy to help you. : D
