by
joabaldwin
This is a mobius strip of Level 1 or Super Mario Bros. The whole level is wrapped around itself in a single surface, and poor Mario begins and ends at the same spot every time :(
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
by
avandius
Dice set with percentile modeled in a Steampunk theme. The dice range from 16mm to 24mm.
by
Bathsheba
A pendant for metal printing. I have trouble believing that these are photos and not renders...something about this object feels very unlikely.
by
Whystler
The nocturnal (or nocturlabe) is a very old instrument for telling time at night by measuring the stars. While concept is ancient, this design is all original. It is fully functional (all dials move properly) and meant to be worn as a pendant. This is now available for sale, as it has been tested and works nicely.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
by
MichielCornelissen
Don’t let unruly wires get between you and your music. Pod à porter is the easiest way to wear your music, and it’s now available for the iPod shuffle 4th generation.
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
by
nervoussystem
The Hyphae lamp is a series of organic table lamps based on how veins form in leaves. Each lamp is a completely one-of-a-kind design 3D-printed in nylon plastic. The lamps are lit by eco-friendly LED's and cast dramatic branching shadows on the wall and ceiling.
Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp
Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp
About Hyphae
Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.
Lighting Specifications
The lamp comes with an eco-friendly 3-watt 200 lumen LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and works off a 120V or 240V outlet.
Please contact us at http://n-e-r-v-o-u-s.com/contact.php to receive the lighting components for the lamp. We will send them to you free of charge if you purchase the lamp shade.
by
shengchiehchang
Protective and decorative case for Iphone 4 / 4s.
It is a monocoque with double layered "brain cell" structures.
NEW pattern updated! April 2013.
For iPhone 5, please go to this page
NEW pattern updated! April 2013.
For iPhone 5, please go to this page
by
nervoussystem
A fine network of vessels defines the surface of this crescent-shaped pendant which was inspired by how veins form in leaves. The densely interconnected structure is at once airy and strong.
It is a part of Hyphae, a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge.
Watch the video below to see the the form was created.
--
If you are interested in purchasing the necklace with the chain, please buy from our website
nylon plastic version: http://n-e-r-v-o-u-s.com/shop/product.php?code=85
sterling silver version: http://n-e-r-v-o-u-s.com/shop/product.php?code=96
If you purchase directly from Shapeways it will not come with a chain.
by
Bathsheba
A pendant for metal printing. I think this may be the most adorable thing ever.
by
joabaldwin
The design is based on the classic Celtic-style knot symbol for the World Tree from Norse mythology, Yggdrasil.
Inside the leaves you can see a small sphere of blue. If you look reaaally carefully, you could notice that the continents in the blue ball are in the shape of Pangea and not our current distribution.
Inside the leaves you can see a small sphere of blue. If you look reaaally carefully, you could notice that the continents in the blue ball are in the shape of Pangea and not our current distribution.
by
avandius
Interlocking gears in a steampunk theme. These standard sized gear dice will keep your game turning (figuratively speaking, they do not actually turn...)
With percentile die.
With percentile die.
by
avandius
Interlocking gears in a steampunk theme. These standard sized gear dice will keep your game turning (figuratively speaking, they do not actually turn...)
With percentile die.
With percentile die.
by
schreerdesign
(Note, prices reduced) This is a sound magnifier for your iPhone 4 or 4s (does not fit others), based on the old Gramophones of the late 19th and early 20th Centuries. NOTE: BASE AND HORN ARE NOW SOLD SEPARATELY FOR TECHNICAL REASON. THIS FILE IS THE BASE ONLY. SEE THIS LINK FOR THE HORN: http://shpws.me/5i0B . (Adding this to cart will add both)
+ 
Want to get a set?
+ 
by
byShapeways
Draw your earrings and we will turn them into 3d.
Instructions:
1) Download Sketch Sheet
2) Scan the sketch sheet and save the image.
3) Click "Personalize" and upload the image.
4) Order your ring in your choice of material. Shapeways will turn your drawing into a printable 3D model, and ship it to you.
Instructions:
1) Download Sketch Sheet
2) Scan the sketch sheet and save the image.
3) Click "Personalize" and upload the image.
4) Order your ring in your choice of material. Shapeways will turn your drawing into a printable 3D model, and ship it to you.
by
byShapeways
Draw your earrings and we will turn them into 3d.
Instructions:
1) Download Sketch Sheet
2) Scan the sketch sheet and save the image.
3) Click "Personalize" and upload the image.
4) Order your earrings in your choice of material. Shapeways will turn your drawing into a printable 3D model, and ship it to you.
You can also do it yourself with our 2D to 3D design tool, and upload a black and white .jpg. You'll just have to add your own earring hooks and get the measurements correct. Note that it doesn't support multicolored image nor it would treat the image as texture. The image will only be used for bumping the depth on the surface.
Instructions:
1) Download Sketch Sheet
2) Scan the sketch sheet and save the image.
3) Click "Personalize" and upload the image.
4) Order your earrings in your choice of material. Shapeways will turn your drawing into a printable 3D model, and ship it to you.
You can also do it yourself with our 2D to 3D design tool, and upload a black and white .jpg. You'll just have to add your own earring hooks and get the measurements correct. Note that it doesn't support multicolored image nor it would treat the image as texture. The image will only be used for bumping the depth on the surface.
by
cwestbrook
Please read the entire listing. Thank you!
Steampunk your iPhone with a cog / gear puzzle style design inspired by the inner workings of the mechanical. This is my newest design update! Now much more interchangeable this puzzle connection design is also more stylized and easier to put on and take off.
If you'd like each half a different color and/or design please go to my main page (www.shapeways.com/shops/cwestbrook) and order each half separately.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This puzzle case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options.
The photos of the case in black highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you recieve your case you note that the front puzzle pieces together and should be undone first when taking off the case.
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
Steampunk your iPhone with a cog / gear puzzle style design inspired by the inner workings of the mechanical. This is my newest design update! Now much more interchangeable this puzzle connection design is also more stylized and easier to put on and take off.
If you'd like each half a different color and/or design please go to my main page (www.shapeways.com/shops/cwestbrook) and order each half separately.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This puzzle case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options.
The photos of the case in black highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you recieve your case you note that the front puzzle pieces together and should be undone first when taking off the case.
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
curvecreative
Bugle for iPhone 4 / 4S
Enjoy your music louder with the Bugle
The Bugle is a natural acoustic amplifier for your iPhone that fits snuggly over the speaker, acts as a stand and makes your music sound better and louder. The Bugle is curved to provide a natural flex that assures a snug fit on your iPhone.
A great solution for bringing anywhere and requires no batteries. Just chuck it in your bag and use it for music at the park, for watching a film, or for sharing a youtube video
iPhone 5 version available here
by
Whystler
Here is an attractive and educationally useful pendant for the scholar, astronomer, steampunk enthusiast, or the lover of the unique and celestial.
The tellurion is a model of how the earth and the moon move in space. You will see that the eath rotates freely on its axis, orbited by the moon. Orbit the whole thing around a candle or lightbulb, and you have a full feldged model of the earth, the moon and the sun.
There is some talk that if you spin the little moon on this pendant around the earth with the right conditions, that you can travel forward and back in time! ;)
ASSEMBLY REQUIRED:
If you want a challenge, order this piece inexpensively here on Shapeways, and assemble it yourself at home. Assembly is not complex, but it does require some careful dexterity and a little strength. Disclaimer: If you order this model here and assemble it yourself, Whystler is not responsible for any damage you may cause to it. If you assemble this piece with care and patience, then you will have a nice piece of jewelry.
Watch for the assembly video. In the meantime, check out the showcase video below!
The tellurion is a model of how the earth and the moon move in space. You will see that the eath rotates freely on its axis, orbited by the moon. Orbit the whole thing around a candle or lightbulb, and you have a full feldged model of the earth, the moon and the sun.
There is some talk that if you spin the little moon on this pendant around the earth with the right conditions, that you can travel forward and back in time! ;)
ASSEMBLY REQUIRED:
If you want a challenge, order this piece inexpensively here on Shapeways, and assemble it yourself at home. Assembly is not complex, but it does require some careful dexterity and a little strength. Disclaimer: If you order this model here and assemble it yourself, Whystler is not responsible for any damage you may cause to it. If you assemble this piece with care and patience, then you will have a nice piece of jewelry.
Watch for the assembly video. In the meantime, check out the showcase video below!
by
COVO
Product Name "Screwdriver Ring". Designed by Japan.
Available in either stainless steel (antique bronze & gold plated)
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
Available in either stainless steel (antique bronze & gold plated)
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
by
Ammnra
Ring based on Portal 2 GLaDOS.
US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
The ring will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
The ring will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
by
Jengineer
What the world needs is more polyhedral dice, of course.
A test run with leaves and vines design.
White detail or steel is recommended. WSF has poor resolution on the numbers. Steel is hollow and looks fantastic. Detail material doesn't empty well, so dice are more solid.
A test run with leaves and vines design.
White detail or steel is recommended. WSF has poor resolution on the numbers. Steel is hollow and looks fantastic. Detail material doesn't empty well, so dice are more solid.
by
vaclav.mazany
Beautiful ring, great as a present for the one you love.
This one has inner diameter of 18 mm and is made of silver.
Create your own size, just click on "Personalize" and we will prepare the rest.
This one has inner diameter of 18 mm and is made of silver.
Create your own size, just click on "Personalize" and we will prepare the rest.
by
artizanwork
You don’t have to sacrifice style when protecting your iPhone. This case resembles the charm of a “Sweater” but is protected by advanced science.
Handwoven by robots, the cross stitching can move separately from each other creating an awesome tactile feel while acting like mini shock absorbers that protects your phone.
On the Shapeways website, this case is only available in “white” polished nylon without stain blocking protective coating. Before you use the case, I recommend that you apply this coating (not included with the case). This will help protect the case from ordinary stains.
On the ArtizanWork website (www.artizanwork.com), this case is available in 4 colors – white, red, grey, and black. All cases sold from this site are polished and sealed with our protective coating. The prices will be higher on the Artizanwork website due to the additional hand finishing of the cases with the protective coating.
Handwoven by robots, the cross stitching can move separately from each other creating an awesome tactile feel while acting like mini shock absorbers that protects your phone.
On the Shapeways website, this case is only available in “white” polished nylon without stain blocking protective coating. Before you use the case, I recommend that you apply this coating (not included with the case). This will help protect the case from ordinary stains.
On the ArtizanWork website (www.artizanwork.com), this case is available in 4 colors – white, red, grey, and black. All cases sold from this site are polished and sealed with our protective coating. The prices will be higher on the Artizanwork website due to the additional hand finishing of the cases with the protective coating.
by
Whystler
This orrery is a fully functional model of the 4 terrestrial planets: mercury, venus, earth, and mars. Ideal for planning your next interplantary voyage on your star-galleon. The planets can be moved to show their orbital placement around the sun. Each planet is sized relative to each other. The size of the sun and diameter of the orbits are not accurate, for display purposes. Working planetary models have existed in various forms since 90 BC. The orrery was given it's name in the 17th century after an Earl who ordered a clockwork copy. Now you can have your own! This piece is nearly 6 inches tall, the working sphere being 4 inches in diameter.
by
nervoussystem
this is size LARGE
size MEDIUM also available
don't know which size you need? check out our sizing guide
Inspired by the complex forms of radiolarians, where intricate pattern is integral to structure, these shapes derive from a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure.
size MEDIUM also available
don't know which size you need? check out our sizing guide
Inspired by the complex forms of radiolarians, where intricate pattern is integral to structure, these shapes derive from a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure.
by
jasolo
This Universal Equinoctial Ring Dial 2 is a portable and self-orientating sundial. You can see how a similar dial works: http://www.sunwatchmaker.com/instructions.php .
This is an improved version of a previous model:
http://www.shapeways.com/model/132928/universal_ring_dial.html
You'll receive five parts unconnected and undyed. Follow these instructions:
1. Clean the parts with cold water and soft brushing to remove support material remaining from the 3d printing.
2. Dip the parts in cold tea for a couple of hours. Holes will get more dyed because of the support material trapped in them. The slider part doesn't have marks, but with the dying will get as yellowish as the other parts.
3. Paint with black ink the marks. Let dry the ink and then remove it with a wet sheet. This way, ink only remains in the marks. In the photo the slider and some zones of the rings weren't inked so they maintained the yellow tone because tea dyes all no flat surfaces. The hour ring has marks on both sides, but only one needs to be dyed.
4. Enter the slider with a little pressure through the slit of the central (month) bar. It's only possible over June and July marks. Then move the slider to the desired month and day mark. Each mark represents two days.
5. Deform lightly the meridian ring (the bigger one) in order to insert the hour ring. Be sure that both rings have their dyed faces on the same side when in folded position.
6. Deform again the latitude ring to put the central bar in position. Check the photo for the right orientation.
7. Finally, insert the eyelet through the "jasolo fecit" part of the meridian ring and displace it to the latitude value of your location. To improve the sliding of the eyelet, you can clean the path with a stick before the insertion (again the support material).
You can purchase the individual parts in case you need any replacement:
- Meridian ring: http://www.shapeways.com/model/185486/universal_ring_dial_2__meridian_ring_part_.html
- Hour ring: http://www.shapeways.com/model/185480/universal_ring_dial_2__hour_ring_part_.html
- Central Bar: http://www.shapeways.com/model/185737/universal_ring_dial_2__central_bar_part_.html
- Slider: http://www.shapeways.com/model/165846/universal_ring_dial_2__slider_part_.html
- Eyelet: http://www.shapeways.com/model/185479/universal_ring_dial_2__eyelet_part_.html
This is an improved version of a previous model:
http://www.shapeways.com/model/132928/universal_ring_dial.html
You'll receive five parts unconnected and undyed. Follow these instructions:
1. Clean the parts with cold water and soft brushing to remove support material remaining from the 3d printing.
2. Dip the parts in cold tea for a couple of hours. Holes will get more dyed because of the support material trapped in them. The slider part doesn't have marks, but with the dying will get as yellowish as the other parts.
3. Paint with black ink the marks. Let dry the ink and then remove it with a wet sheet. This way, ink only remains in the marks. In the photo the slider and some zones of the rings weren't inked so they maintained the yellow tone because tea dyes all no flat surfaces. The hour ring has marks on both sides, but only one needs to be dyed.
4. Enter the slider with a little pressure through the slit of the central (month) bar. It's only possible over June and July marks. Then move the slider to the desired month and day mark. Each mark represents two days.
5. Deform lightly the meridian ring (the bigger one) in order to insert the hour ring. Be sure that both rings have their dyed faces on the same side when in folded position.
6. Deform again the latitude ring to put the central bar in position. Check the photo for the right orientation.
7. Finally, insert the eyelet through the "jasolo fecit" part of the meridian ring and displace it to the latitude value of your location. To improve the sliding of the eyelet, you can clean the path with a stick before the insertion (again the support material).
You can purchase the individual parts in case you need any replacement:
- Meridian ring: http://www.shapeways.com/model/185486/universal_ring_dial_2__meridian_ring_part_.html
- Hour ring: http://www.shapeways.com/model/185480/universal_ring_dial_2__hour_ring_part_.html
- Central Bar: http://www.shapeways.com/model/185737/universal_ring_dial_2__central_bar_part_.html
- Slider: http://www.shapeways.com/model/165846/universal_ring_dial_2__slider_part_.html
- Eyelet: http://www.shapeways.com/model/185479/universal_ring_dial_2__eyelet_part_.html
by
Ammnra
Ring based on Portal 2 Space Core
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
by
wpagnes82828
for iphone 4/4s.
The hollowed case in combination with the contract color of the iphone itself gives a vivid animal figure.
The case is stylish and in the same time heat eliminated.
by
MichaelMueller
A ssssnake... well, to be honest, not my favorite type of animal...
but a little, clever snake-pet would be nice...
living winded around a finger of my hand...
eating annoying mosquitoes and biting bad people!
The default Ring Size is US 6.5.
Use one of the following links to choose another ring size.
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 7.5
Inside Diameter: 17.73 mm / 0.698 in
Inside circumference: 55.70 mm / 2.19 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
US Ring Size 15
Inside Diameter: 23.83 mm / 0.938 in
Inside circumference: 74.80 mm / 2.95 in
Other size needed? Just send me a message!
but a little, clever snake-pet would be nice...
living winded around a finger of my hand...
eating annoying mosquitoes and biting bad people!
The default Ring Size is US 6.5.
Use one of the following links to choose another ring size.
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 7.5
Inside Diameter: 17.73 mm / 0.698 in
Inside circumference: 55.70 mm / 2.19 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
US Ring Size 15
Inside Diameter: 23.83 mm / 0.938 in
Inside circumference: 74.80 mm / 2.95 in
Other size needed? Just send me a message!
by
JoshuaHarker
The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. Small silver version of the original design easily strung as a necklace.
by
improbablecog
Size 5
