by
virtox
Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
by
stefdevos
This detailed model of the moon is hollow and therefore very price efficient. It will balance on a small gap on the bottom. You can also hang it on a wire using a bent paperclip. See video and images. Made for full color sandstone.
by
thehumanhive
A tribute to papercraft artist Haruki Nakamura's sculpture, Gear's Heart. The assembled heart measures 8.5 cm in height (8.5 cm x 8.2 cm x 5.1 cm).
by
Dimmulain
IMPORTANT INFORMATION!!!
If you want to get a polished and fully functional QR code pendant, set the delivery address to my one (I will provide it by a private message). I need to get the product first to finish it and then send to you.
This QR code tag can contain any encoded message that you wish (min. 18, max. 32 characters). If you want to make it a functional url tag, you need to include "http://" part!!!
The QR codes are now used in many spheres of life. They can contain numbers and letters, so you can encode any kind of text information, be it address, phone number, message, name, web link, etc.
Most of the modern mobile phones (and apple iphone was one of the first to feature this technology) can decode the QR codes, making QR-coding a funny, easy and peculiar way to say something.
You can use this tag as a keychain or as a pendant.
Also, check out this colored plastic tag!! It's cheaper, it's bigger and it's colored! :)
If you want to get a polished and fully functional QR code pendant, set the delivery address to my one (I will provide it by a private message). I need to get the product first to finish it and then send to you.
This QR code tag can contain any encoded message that you wish (min. 18, max. 32 characters). If you want to make it a functional url tag, you need to include "http://" part!!!
The QR codes are now used in many spheres of life. They can contain numbers and letters, so you can encode any kind of text information, be it address, phone number, message, name, web link, etc.
Most of the modern mobile phones (and apple iphone was one of the first to feature this technology) can decode the QR codes, making QR-coding a funny, easy and peculiar way to say something.
You can use this tag as a keychain or as a pendant.
Also, check out this colored plastic tag!! It's cheaper, it's bigger and it's colored! :)
by
virtox
Eleganty swirling towards itself.
Larger version available here
I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included) These are availble at your local bijoux or jewellery store or via websites. If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
More earrings
Larger version available here
I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included) These are availble at your local bijoux or jewellery store or via websites. If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
More earrings
by
badulaques
"I miss you!" Bracelet. This piece is an expression of feeling the absence of a beloved and irreplaceable. A friend, a father, a mother, a boyfriend or girlfriend, even a beloved pet. This is a delicate and playful gift of love.
This bracelet has Ø77mm on the inside or 24cm of it's internal circunference's length as standard measures. To select between others measures click "Personalize".
DISCLAIMER:
Make sure you understand all specifications of this piece (such as surface finish, colors, size, etc) before you order one! Any questions? Do you want this piece in others dimensions? Drop me a note!
Your country may charge some importation tax. For more information about that I recomend contact the customs office of your country.
--
"Sinto sua falta!" Bracelete. Esta peça é a expressão do sentimento da ausência de uma pessoa querida e insubstituível. Um amigo, um pai, uma mãe, um namorado ou namorada, até mesmo um animal de estimação amado. É um presente delicado e lúdico de amor.
Este bracelete tem Ø77mm no interior ou 24 cm de seu comprimento circunferência interna como medidas-padrão. Para selecionar, entre outras medidas, clique em "Personalize".
ATENÇÃO:
Certifique-se de que entenda todas as especificações das peças (como acabamento, cores, tamanho, etc) antes de adquirí-la! Tem alguma dúvida? Entre em contato!
AOS COMPRADORES NO BRASIL:
Este produto é importado e sobre todo produto de importação a receita federal pode cobrar taxa de importação das peças. A alíquota pode variar entre (60%-100%) e incide sobre o valor total da compra.
This bracelet has Ø77mm on the inside or 24cm of it's internal circunference's length as standard measures. To select between others measures click "Personalize".
DISCLAIMER:
Make sure you understand all specifications of this piece (such as surface finish, colors, size, etc) before you order one! Any questions? Do you want this piece in others dimensions? Drop me a note!
Your country may charge some importation tax. For more information about that I recomend contact the customs office of your country.
--
"Sinto sua falta!" Bracelete. Esta peça é a expressão do sentimento da ausência de uma pessoa querida e insubstituível. Um amigo, um pai, uma mãe, um namorado ou namorada, até mesmo um animal de estimação amado. É um presente delicado e lúdico de amor.
Este bracelete tem Ø77mm no interior ou 24 cm de seu comprimento circunferência interna como medidas-padrão. Para selecionar, entre outras medidas, clique em "Personalize".
ATENÇÃO:
Certifique-se de que entenda todas as especificações das peças (como acabamento, cores, tamanho, etc) antes de adquirí-la! Tem alguma dúvida? Entre em contato!
AOS COMPRADORES NO BRASIL:
Este produto é importado e sobre todo produto de importação a receita federal pode cobrar taxa de importação das peças. A alíquota pode variar entre (60%-100%) e incide sobre o valor total da compra.
by
virtox
Sorry, this size is no longer available
Please go here for the large version
A delicate free form model dubbed "Holey".
Makes for some nice Christmas decorations :-)
Minimum thickness is around 0.25 mm on the inside struts.
Prints perfectly in Strong & Flexible, might get bend a bit during transport, but you can bend it back gently if you hold it in warm/hot water.
The tips are sharp and fragile, so please handle with care.
Please go here for the large version
A delicate free form model dubbed "Holey".
Makes for some nice Christmas decorations :-)
Minimum thickness is around 0.25 mm on the inside struts.
Prints perfectly in Strong & Flexible, might get bend a bit during transport, but you can bend it back gently if you hold it in warm/hot water.
The tips are sharp and fragile, so please handle with care.
by
johnwun
At Thanksgiving, my brother-in-law Paul showed me a guitar pick that he'd drilled holes into to provide a better grip. The GripPick incorporates his drill hole idea into an asthetic design.
NOTE: The listed price is for a pair of two picks. (of the same material) So yes, if you order one, you will get two.
Strong and Flexible is like playing with an index-card. Very durable, but a little more flexible than I usually play with.
I tried glass, but at 1mm thick, it's a little too fragile to actually play with.
This pick was designed to be printed in metal. Bronze plated steel is the best finish for highlighting the pattern. I wear the bronze one around my neck, so I always have a pick, (and a good story.)
NOTE: The listed price is for a pair of two picks. (of the same material) So yes, if you order one, you will get two.
Strong and Flexible is like playing with an index-card. Very durable, but a little more flexible than I usually play with.
I tried glass, but at 1mm thick, it's a little too fragile to actually play with.
This pick was designed to be printed in metal. Bronze plated steel is the best finish for highlighting the pattern. I wear the bronze one around my neck, so I always have a pick, (and a good story.)
by
SellusionStar
This big triangle was designed to be a nice deco accessory for your living room or desktop. Whatever you want..
by
qedqubit
the balls inside the ball make this a weird example of 3D printing as it seems there are no seems
