by
JoshuaHarker
Scaled down version without the jaw of the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time.
by
90grad@gmx.ch
Ring in the form of an octopus.
Default ring size is 18.5mm (various sizes available).
Also available as bracelet.. Please contact us
Default ring size is 18.5mm (various sizes available).
Also available as bracelet.. Please contact us
by
bitstoatoms
Size 6 Size 7 Size 8 Size 9 Size 10 Size 11 Size 12
The Skull Ring by Bits to Atoms is 3D printed in stainless steel with a tessellated and slightly pitted texture. A masculine piece that works just as well with denim jeans and a t-shirt as it does with a 3 piece suit (or formal dress).Please contact for bespoke sizing.
by
Ammnra
Ring inspired by the Omni Tool and Omni Blade from the Mass Effect universe
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Painted with 6 thin coats of Orange Transparent Glass Paint (Americana Crystal Gloss Enamels)
Black line painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Painted with 6 thin coats of Orange Transparent Glass Paint (Americana Crystal Gloss Enamels)
Black line painting guide
Thanks for your order and commitment to nerd culture!
by
Vidalcris
by
Eragatory
Cutlery refers to any hand implement used in preparing, serving, and especially eating food.
Aside of the functional aspect of tableware, silverware has always been and will perpetually be an ornamental figure. Conceived to pleasure the eye while fulfilling one of our most primary needs of food consumption and or squander. Cutlery is unique in its ability to sustain time and carries a remarkable family heritage. Sets of knifes, spoons, forks have been passed on from generation to generation all over the globe, traveling the whole world as a piece of personal history.
Key elements while designing this set was the notion of decay/processing, ornamental and aesthetic excess as in former rococo and barock times, moments of collapse/disequilibrium and a balance in between etiquette dining and painful torture tools. By subverting the logic of perfection and beauty, non-perfect images coming from controlled methodologies were generated. What used to be about mastering the result of a non-perfect process is now about the production of monstrosity and the grotesque throughout very accurate mechanisms, like 3d printing. Which creates an unlimited range of possibilities concerning material usage, design approaches/aesthetics and form production.
Aside of the functional aspect of tableware, silverware has always been and will perpetually be an ornamental figure. Conceived to pleasure the eye while fulfilling one of our most primary needs of food consumption and or squander. Cutlery is unique in its ability to sustain time and carries a remarkable family heritage. Sets of knifes, spoons, forks have been passed on from generation to generation all over the globe, traveling the whole world as a piece of personal history.
Key elements while designing this set was the notion of decay/processing, ornamental and aesthetic excess as in former rococo and barock times, moments of collapse/disequilibrium and a balance in between etiquette dining and painful torture tools. By subverting the logic of perfection and beauty, non-perfect images coming from controlled methodologies were generated. What used to be about mastering the result of a non-perfect process is now about the production of monstrosity and the grotesque throughout very accurate mechanisms, like 3d printing. Which creates an unlimited range of possibilities concerning material usage, design approaches/aesthetics and form production.
by
JoshuaHarker
The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. Small silver version of the original design easily strung as a necklace.
by
COVO
Product Name "Cat Skull Ring". Designed by Japan.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 11.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 11.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
by
mendelheit
Available in any size, please don't hesitate to contact us or comment, we'll prepare one to your size.
If you don't know your ring size, the best is to measure the inside diameter of another ring you have, or the exterior diameter of your finger, and check this size list:
http://en.wikipedia.org/wiki/Ring_size
by
bitstoatoms
The 3D Printed Skull Brooch by Bits to Atoms continues the Popular Skull range to be held in place with two rare earth magnets so you do not need to place a pin through the lapel of your jacket to make it stay.
Masculine, elegant and tough.
Visit www.duanns.com to see more info on Bits to Atoms
NOTE: Does NOT include magnet
Masculine, elegant and tough.
Visit www.duanns.com to see more info on Bits to Atoms
NOTE: Does NOT include magnet
by
Vidalcris
by
MichaelMueller
Stag beetles are amazing creatures. They look like tiny knights in full armor. I think there a not many left of this brave soldiers ... I saw my last stag beetle when I was a kid!
This stag beetle can be used as a pendant!
There is an awesome scarab pendant available which was a great inspiration for this stag beetle. It was made by Elytra. Check it out!
This stag beetle can be used as a pendant!
There is an awesome scarab pendant available which was a great inspiration for this stag beetle. It was made by Elytra. Check it out!
by
SGDesigns
Silver Demon Skull Bead
Hole size: 6mm
Estimated weight: 27 grams
The bead in the image above is in standard silver. I gave it a light polish and aftermarket patina.
If you want it patinated and polished, please contact me directly.
by
Eeppium
A skull ring with elogated jawbone to fit into a finger.
*Hole diameter : 17mm / 0.67 Inches.*
*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin*
*Hole diameter : 17mm / 0.67 Inches.*
*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin*
by
JoshuaHarker
Works for many doors. Key reads "13" in roman numerals on the 666 side & "7" when flipped to 777 side (via roman numeral subtratcion). Needle not included (too thin to reliably print). Has a small hole in end to accept needle or pin to complete the piece. Hole will vary with material choice & may need to be opened with small drill.
by
Eeppium
A ring with crystals growing from it .
*Hole diameter 17,30mm* Size 7.
*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin*
See also the earrings to go with the ring Crystal Earring
*Hole diameter 17,30mm* Size 7.
*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin*
See also the earrings to go with the ring Crystal Earring
by
JeremyMallin
Bat pendant with built-in jump rings. Chain not included. This elegantly styled, spooky bat is perfect for Halloween. Gracefully contoured, this ridged bat has loads of character. This pendant comes in stainless and plated steel or elegant Sterling silver.
by
Ammnra
Pendant (or earring) inspired by my favorite quarian engineer Tali'zorah Vas Normandy from the Mass Effect universe (BioWare)
ATTENTION:The parts in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Silver Detail Process:
Masked off frame with painter’s tape
Spray painted “Lens” section with a few thin coats Transparent purple (VHT SP452 Anodized Purple via Amazon)
Removed masking and painted the frame with a thin coat of Black Transparent Glass Paint for detail lines
Transparent Detail Process:
Dyed entire part with Purple RIT Fabric Dye (Dyeing Guide)
Painted the frame with Silver (Americana Gloss Enamels)
Painted entire part with 2 thin coats of Black Transparent Glass Paint for detail lines and to darken the purple (Americana Crystal Gloss Enamels)
Loyality Gold sections done with careful application of Rub 'N Buff
Steel/Alumide Detail Process:
Masked off frame with painter’s tape
Spray painted silver base coat on “Lens” section
Spray painted “Lens” section with a few thin coats Transparent purple (VHT SP452 Anodized Purple via Amazon)
Removed masking and painted the frame with a thin coat of Black Transparent Glass Paint for detail lines
General Detailing Guide
Thanks for your order and commitment to nerd culture!
ATTENTION:The parts in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Silver Detail Process:
Masked off frame with painter’s tape
Spray painted “Lens” section with a few thin coats Transparent purple (VHT SP452 Anodized Purple via Amazon)
Removed masking and painted the frame with a thin coat of Black Transparent Glass Paint for detail lines
Transparent Detail Process:
Dyed entire part with Purple RIT Fabric Dye (Dyeing Guide)
Painted the frame with Silver (Americana Gloss Enamels)
Painted entire part with 2 thin coats of Black Transparent Glass Paint for detail lines and to darken the purple (Americana Crystal Gloss Enamels)
Loyality Gold sections done with careful application of Rub 'N Buff
Steel/Alumide Detail Process:
Masked off frame with painter’s tape
Spray painted silver base coat on “Lens” section
Spray painted “Lens” section with a few thin coats Transparent purple (VHT SP452 Anodized Purple via Amazon)
Removed masking and painted the frame with a thin coat of Black Transparent Glass Paint for detail lines
General Detailing Guide
Thanks for your order and commitment to nerd culture!
by
mdavisstudios
Available here: http://www.etsy.com/shop/mdavisstudios
This anatomical heart ring holder, made in stainless steel, makes a very unique and romantic gift for the science or anatomy lover.
Rings pictured not included.
3 3/4 inches high, 1 inch wide, and 1 inch deep.
Thanks for looking!
This anatomical heart ring holder, made in stainless steel, makes a very unique and romantic gift for the science or anatomy lover.
Rings pictured not included.
3 3/4 inches high, 1 inch wide, and 1 inch deep.
Thanks for looking!
by
Vidalcris
Look at my shop i got so many models !
Sentry Turrets are miniature tripod robots that appear in every game in the Portal series. They are seen as incapable of independent movement, but can open each side of their chassis (their 'arms') horizontally in order to reveal two gatling guns. The central part of the chassis holds their red eye, which emits a targeting laser. Almost all of the space within the Turret is devoted to storing the ridiculously stacked ammo, explaining the nearly infinite supply of ammo when firing.
by
TheRogueAndTheWolf
A solid Sterling Silver Cat Skull ring to adorn your hands. Induces acute independence.
Available in various sizes. Feel free to contact us for any custom sizes and we’ll make it happen.
Most of our designs are in stock and ready to dispatch at The Rogue + The Wolf Etsy shop, so pop in and have a look if you are in a hurry.
Make sure to visit our new The Rogue + The Wolf website.
by
StephanFriedrich
Available in every size between 12.5 and 22.5 mm (inside diameter).
Choose Silver Glossy for best result and most details.
Find your ringsize here:
findmyringsize.com
en.wikipedia.org/wiki/Ring_size
Size at 22.5 mm inside diameter:
Choose Silver Glossy for best result and most details.
Find your ringsize here:
findmyringsize.com
en.wikipedia.org/wiki/Ring_size
Size at 22.5 mm inside diameter:
by
mendelheit
Available in any size, please don't hesitate to contact us or comment, we'll prepare one to your size.
If you don't know your ring size, the best is to measure the inside diameter of another ring you have, or the exterior diameter of your finger, and check this size list:
http://en.wikipedia.org/wiki/Ring_size
by
kspaho
This ring is for all those who like to think, dream, imagine and are absolutely bored with standarization, mondaine life, cubicles, cookie-cutter thinking and so on.
This particular one has a 17.30mm diameter, but please feel free to email me for custom sizes. (available in a variety of materials).
email:kspaho172@g.rwu.edu
by
Eragatory
Blue version also available
Pink version also available
This design balances on the edge in-between functionality, digital aesthetics, mass customisation and object Oriented Eclecticism. In contrast to contemporary thought and design, which views things as the aggregation or assembly of smaller bits and parts, in Object Oriented Design new objects emerge out of an ecology of interaction of multiple and heterogeneous objects. Through a process of formation or computation, highly differentiated, contradictory concepts and structures can become one object, without resulting in an incongruous collage.
The use of contemporary production techniques as 3d printing offers this design a substantial relevance, since it is designed throughout a series of semi automated steps. This would enable the creation of several geometrical variations and color schemes for this design, with the advantage of being able to print out customised vases on demand. All slightly different in erosion type or formation. Always following the same design rules, production time and all for approximately the same price. Economically this makes a lot of sense since their would not be any overstock needed like in other production methods, where prices only go down depending on a large amount of produced items.
Pink version also available
This design balances on the edge in-between functionality, digital aesthetics, mass customisation and object Oriented Eclecticism. In contrast to contemporary thought and design, which views things as the aggregation or assembly of smaller bits and parts, in Object Oriented Design new objects emerge out of an ecology of interaction of multiple and heterogeneous objects. Through a process of formation or computation, highly differentiated, contradictory concepts and structures can become one object, without resulting in an incongruous collage.
The use of contemporary production techniques as 3d printing offers this design a substantial relevance, since it is designed throughout a series of semi automated steps. This would enable the creation of several geometrical variations and color schemes for this design, with the advantage of being able to print out customised vases on demand. All slightly different in erosion type or formation. Always following the same design rules, production time and all for approximately the same price. Economically this makes a lot of sense since their would not be any overstock needed like in other production methods, where prices only go down depending on a large amount of produced items.
by
tesserato
Joints are somewhat tricky, so expect some sanding before assembling the model (and maybe some gluing ?). I'm working on V2, with better joints (and shipping with some spare joints too, just in case).Comments, suggestions and stuff, drop a line at tesserato@hotmail.com
by
MuseumofSmallThings
A crystal or crystalline solid is a solid material whose constituent atoms, molecules, or ions are arranged in an orderly repeating pattern extending in all three spatial dimensions described by classical physics theories: from a particular point in space, the basic directions in which we can move are up/down, left/right, and forward/backward.
Glass, however, is a non-crystalline, amorphous solid material. Both components of this ring have been created using 3D printed black glass, and designed in the likeness of a naturally formed crystal. This is the first design we have that utilises 3D printed glass.
This ring is made using 3D Printing.technology.
It will be available in a range of materials, but initially in a combination of stainless steel and black glass.
It is available in sizes XS, S, M, L, XL. - ring size chart
Glass, however, is a non-crystalline, amorphous solid material. Both components of this ring have been created using 3D printed black glass, and designed in the likeness of a naturally formed crystal. This is the first design we have that utilises 3D printed glass.
This ring is made using 3D Printing.technology.
It will be available in a range of materials, but initially in a combination of stainless steel and black glass.
It is available in sizes XS, S, M, L, XL. - ring size chart
by
Silverbeam
Inspired by the anime sailormoon. ((some assembly required)) There are two holes in the base to attache the lid with a loop. I reccomend clear beading wire. If you don't want to mess with it, I would be happy to do it for you. If so email me at bowenlady@gmail.com
Tthis is a 1/4 size item of the original. The smallest I can make it.
Tthis is a 1/4 size item of the original. The smallest I can make it.
by
MuseumofSmallThings
Kingdom: Animalia
Phylum: Chordata
Subphylum: Vertebrata
Class: Mammalia
Order: Primates
Suborder: Haplorrhini
Family: Hominidae
Genus: Homo
Species: Homo sapiens, the Human.
The human skull, death’s head, has long held our fascination and stood as a symbol for life and death, our mortality, the finiteness of the body, and the human condition – our search for purpose in this life.
At birth, the human skull is made up of 44 separate bony elements that gradually fuse together; An adult skull is normally made up of 22 bones, joined together by sutures, joints, and fibres. The skull is one of the least deformable substances found in nature.
The Ring:
This ring is made using 3D Printing.technology.
It is available in either stainless steel or silver.
It is available in sizes XS, S, M, L, XL. - ring size chart
Phylum: Chordata
Subphylum: Vertebrata
Class: Mammalia
Order: Primates
Suborder: Haplorrhini
Family: Hominidae
Genus: Homo
Species: Homo sapiens, the Human.
The human skull, death’s head, has long held our fascination and stood as a symbol for life and death, our mortality, the finiteness of the body, and the human condition – our search for purpose in this life.
At birth, the human skull is made up of 44 separate bony elements that gradually fuse together; An adult skull is normally made up of 22 bones, joined together by sutures, joints, and fibres. The skull is one of the least deformable substances found in nature.
The Ring:
This ring is made using 3D Printing.technology.
It is available in either stainless steel or silver.
It is available in sizes XS, S, M, L, XL. - ring size chart
