Miracombe
A dynamic team specializing in TF customs. As well as other inspired trinkets.
Expertise:
- 3D modeler
- Product designer
- Artist
by
fakebusker83
Just added: a photo of an awesome leader Starscream custom using these hands, done by my good friend Encline!
Note: I have tested these hands in both Strong Flexible and Detail material, and I conclude SF is the better alternative as it is much hardier and is able to stand up to the wear and tear of the joints. Detail material is disappointingly unable to do so, and the joints are too loose for comfort. For better surface detail, I highly recommend ordering the hands in White Strong Flexible Polished!
A pair of posable hands for the Revenge of the Fallen Leader Starscream figure!
Each order comes with 2 hands with interchangeable core, giving customizers the freedom to mount the core with a 5mm socket to allow arming of compatible weapons, or the lack of a socket for an aesthetically pleasing appearance.
Each hand possesses 3 posable fingers on ball-joints, bending in 2 places, and 2 thumbs also mounted on ball joints.
The wrist too, is on a ball joint, allowing for dynamic poses on a already awesome figure.
Due to the nature of the installation, this model is for experienced customizers only. You need a dremel, cutting knife and a strong epoxy sculpt. These are for removing the existing hands and installing the wrist ball-joints in their place.
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
Note: I have tested these hands in both Strong Flexible and Detail material, and I conclude SF is the better alternative as it is much hardier and is able to stand up to the wear and tear of the joints. Detail material is disappointingly unable to do so, and the joints are too loose for comfort. For better surface detail, I highly recommend ordering the hands in White Strong Flexible Polished!
A pair of posable hands for the Revenge of the Fallen Leader Starscream figure!
Each order comes with 2 hands with interchangeable core, giving customizers the freedom to mount the core with a 5mm socket to allow arming of compatible weapons, or the lack of a socket for an aesthetically pleasing appearance.
Each hand possesses 3 posable fingers on ball-joints, bending in 2 places, and 2 thumbs also mounted on ball joints.
The wrist too, is on a ball joint, allowing for dynamic poses on a already awesome figure.
Due to the nature of the installation, this model is for experienced customizers only. You need a dremel, cutting knife and a strong epoxy sculpt. These are for removing the existing hands and installing the wrist ball-joints in their place.
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
by
neuralfirings
Model was sculpted using Blender, a free and open source 3D Modeling/Animation/Game Engine. Find out more at http://blender.org
by
fakebusker83
In response to requests from friends and supporters, I did a revised version of my posable hands for the DOTM leader Sentinel Prime figure, this time to be much more movie accurate and with even more detail!
Each hand is articulated at the wrist with a ball joint. The fingers each are double jointed, and even the thumbs are on ball joints. The leader's hands are big enough for me to design it such that it can hold weapons without relying on the tension of the finger joints, so you can pose them in many different ways, with many different weapons. Transformation is very much possible, I made sure of that (yay!). Just make sure the fingers are arranged properly, kinda similar to how the original fingers were. IssuesThe test sample has a loose wrist ball-joint. This issue is not fixed as I used the same measurements as my other hands. Those hands came out with tight joints so it beats me why this sample was loose. Use super glue to tighten if necessary. As the joints are all designed to be sturdy and the pieces are kinda chunky, I will not recommend ordering them in Detail material or Frosted Ultra Detail material as they will most likely break under that pressure. However, I still will make these materials available for those who are picky about their surface detail. Buyer beware!
TFW2005 thread here. (Includes assembly instructions)
Flickr gallery here.
Each hand is articulated at the wrist with a ball joint. The fingers each are double jointed, and even the thumbs are on ball joints. The leader's hands are big enough for me to design it such that it can hold weapons without relying on the tension of the finger joints, so you can pose them in many different ways, with many different weapons. Transformation is very much possible, I made sure of that (yay!). Just make sure the fingers are arranged properly, kinda similar to how the original fingers were. IssuesThe test sample has a loose wrist ball-joint. This issue is not fixed as I used the same measurements as my other hands. Those hands came out with tight joints so it beats me why this sample was loose. Use super glue to tighten if necessary. As the joints are all designed to be sturdy and the pieces are kinda chunky, I will not recommend ordering them in Detail material or Frosted Ultra Detail material as they will most likely break under that pressure. However, I still will make these materials available for those who are picky about their surface detail. Buyer beware!
TFW2005 thread here. (Includes assembly instructions)
Flickr gallery here.
by
fakebusker83
Version 2.0
This pair of hands are specially designed for the Human Alliance Bumblebee figure! Not only are they extremely posable, the right arm cannon feature of the figure is preserved and everything fits nicely in alt mode!
TFW2005 thread here (with assembly instructions.)
This pair of hands are specially designed for the Human Alliance Bumblebee figure! Not only are they extremely posable, the right arm cannon feature of the figure is preserved and everything fits nicely in alt mode!
TFW2005 thread here (with assembly instructions.)
by
duann
Scissors as used by Mike Bloomberg to cut the ribbon at Shapeways
by
Miracombe
Carry around your secret mark where ever you go, with this secret gothic cross nacklace. Hidden at the base of the cross no one will ever know!
Customization is available, please contact designer for details.
by
Miracombe
Carry around your secret mark where ever you go, with this secret gothic cross nacklace. Hidden at the base of the cross no one will ever know!
Customization is available, please contact designer for details.
by
Miracombe
This is a G1 Transformer Jazz head that fits on the movie deluxe Jazz, from the first live action movie. A little loose fitting but great for display!
by
Miracombe
Vanquish those vicious villains with this V for vendetta fingerman badge pendant!!
by
Miracombe
For those of us who still have book. This holds open your book while you read. Fits on your thumb and doubles as a bookmark.
by
Miracombe
Somthing i made for my mother, another happy ending to the sad cancer story!
