by
RemivanOers
CLIP-IT for iPhone
Your charge buddy on the go.
Clip-it for iPhone converts your Euro iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it lets you wind the usb cable easily around your charger while taking it with you.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock the cable at the bottom. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (European version).
After all the excitement, an US version of Clip-it is available here!
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
Your charge buddy on the go.
Clip-it for iPhone converts your Euro iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it lets you wind the usb cable easily around your charger while taking it with you.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock the cable at the bottom. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (European version).
After all the excitement, an US version of Clip-it is available here!
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
by
RemivanOers
CLIP-IT for iPhone -US edition-
Your charge buddy on the go.
Clip-it for iPhone converts your iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock it by clipping it to your charger. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it US is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (US version).
The European version of Clip-it is available here.
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
Your charge buddy on the go.
Clip-it for iPhone converts your iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock it by clipping it to your charger. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it US is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (US version).
The European version of Clip-it is available here.
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
by
susantio
An elegant and modern vase inspired by the Japanese paper-folding craft. Height 28 cm.
by
RemivanOers
NANO DOCK:
Dock your iPod Nano 6G and give it a spot on your desk, cabinet or nightstand.
The Nano dock holds, syncs and charges your iPod Nano to prepare it for your next musical journey. Nano dock also transforms your Nano to an elegant table clock. See the time at your work desk or use it in the kitchen to perfect cook your egg with the Nano’s build in timer function.
The Nano dock makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and pull the cable through the back. The Nano dock is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
The Nano dock is designed for the iPod Nano 6G, but may work with older iPod models as well.
It’s time to elegantly dock your Nano.
(To fully function your Nano as a clock; activate the ‘show clock after wake’ function in the settings).
Nano dock is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. For further information & support contact the Shapeways customer service.
Dock your iPod Nano 6G and give it a spot on your desk, cabinet or nightstand.
The Nano dock holds, syncs and charges your iPod Nano to prepare it for your next musical journey. Nano dock also transforms your Nano to an elegant table clock. See the time at your work desk or use it in the kitchen to perfect cook your egg with the Nano’s build in timer function.
The Nano dock makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and pull the cable through the back. The Nano dock is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
The Nano dock is designed for the iPod Nano 6G, but may work with older iPod models as well.
It’s time to elegantly dock your Nano.
(To fully function your Nano as a clock; activate the ‘show clock after wake’ function in the settings).
Nano dock is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. For further information & support contact the Shapeways customer service.
by
RemivanOers
REMOTE DOCK
A tiny and elegant dock to store the beautifully designed Apple Remote.
The Apple Remote is a very nice product. It looks stunning and it is wonderfully designed & engineered. I found it a pity that my remote always was lying flat on my desk and that I had no elegant solution to store it. Since Apple is not offering a dock for this product I decided to design one myself and make it available to you.
The Remote dock is available in black & white to fit perfectly with your Mac and/or Apple TV.
This dock allows you to show your elegant remote.
Remote dock is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. For further information & support contact the Shapeways customer service.
A tiny and elegant dock to store the beautifully designed Apple Remote.
The Apple Remote is a very nice product. It looks stunning and it is wonderfully designed & engineered. I found it a pity that my remote always was lying flat on my desk and that I had no elegant solution to store it. Since Apple is not offering a dock for this product I decided to design one myself and make it available to you.
The Remote dock is available in black & white to fit perfectly with your Mac and/or Apple TV.
This dock allows you to show your elegant remote.
Remote dock is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. For further information & support contact the Shapeways customer service.
