The third public evolution of the Animaris Geneticus Parvus. #7 has evolved legs, with pointy feet instead of flat. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros".
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!

The mechanism is printed assembled, and will work without further assembly right after birth from the printer.

A few tips to consider:

- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!

- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.

- The best way to push it is by its nameplate. Do not push down, but forward.

- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.

A pendant for metal printing.  I have trouble believing that these are photos and not renders...something about this object feels very unlikely.

A perfect scarab with all the little details. What an Egyptian metalsmith would have crafted, had the pharoahs dreamed of direct-metal printing.

Featured on BoingBoing, NotCot, and entymologically discerning sterna worldwide.

To wear as a pendant, a simple 2mm-thick cord works well.

A pendant for metal printing.  I think this may be the most adorable thing ever.

The Road Popper is a bike-mounted bottle opener that we developed for our own use and decided afterward to share. We designed it to fasten discreetly to the rails on the underside of the saddle to help keep your bike looking crisp. So far, it's worked on all the bottle caps we've tried it on. Material options are bronze infused stainless steel. Finish options are plain (on the right in the photograph), matte gold, glossy gold, matte antique bronze, and glossy antique bronze. The Road Popper is not intended for alcoholic beverages. Chromoly does not condone cycling while under the influence of alcohol.


Things You'll Need for Installation (not included with purchase)

2 - 3/8” long #6 flat head (countersunk) screws
2 - Nylon locknuts
1 - Screwdriver
1 - Needle nose pliers


Bike Requirements

Conventional bike saddle. If you're not sure if your seat is standard or not, give it a measure. The rails should be 7 mm's (0.275 inch) in diameter and roughly 44mm's (1.73 inch) apart.

At least 228mm's (9”) of space between the underside of your seat and your tire.

9mm's (3/8”) of open rail behind where the seat attaches to the seat post.


*Because this product is fabricated to order it is more expensive that it would be under normal manufacturing conditions. For this same reason it takes about 14 working days to arrive. The cost of shipping (via UPS) is included in the list price. Please note that duties and taxes may be applied to your order when it enters your country.

When is the last time there has been an innovation in buttons? Answer, just now! This button not only holds your shirt together, but it also holds the cord for your ear buds and helps to keep them in your ears. Works for apple ear buds, and any cords with a 2 mm diameter.

A ring with crystals growing from it .

*Hole diameter 18,20mm* Size 8.


*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring

Ring based on Portal 2 Wheatley

SIZE 6

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12

Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!

Size 6 Size 7 Size 8 Size 9 Size 10 Size 11 Size 12

The Skull Ring by Bits to Atoms is 3D printed in stainless steel with a tessellated and slightly pitted texture. A masculine piece that works just as well with denim jeans and a t-shirt as it does with a 3 piece suit (or formal dress).Please contact for bespoke sizing.

It's a little hypercube pendant! There is a slightly bigger one here.

On Proper Usage and Inhibited Ingestion: Why is it that we find the cup so unappetizing? Could it have originated from survival tactics where we relate our proximity to another's teeth as a threat of life, a reminder of predator and prey, poison and contamination? Is this object then successful in its design to prevent gluttonous behavior should food and drink only be offered in the cup? more information at http://lilysu.com

This 3D printed Constructionist bracelet was inspired by modern architecture and its use of complex repetitive geometrical structures. I am fascinated by how these structures can behave to create buildings and objects that look seemingly organic and unique, buildings that change their appearance depending on the angle you look at them. This inspiration has resulted in this collection of intricate and elegant cuffs and bracelets, that change their appearance constantly as you move and wear them. This bracelet is an example where new techniques like 3D printing has opened up a world of new design possibilities -this bracelet would be almost impossible to make using traditional jewellery techniques. Size: Medium (6,5cm / 2,6in opening which is 20,5cm / 8in inner circumference). See my other listing for size Large, or let me know if you would like another size.

Clip used for the cable on headphones.

A wide bangle made of solid sterling silver. Pointed flower motifs make up a three-dimensional lattice that wraps around a mysterious internal space. Appears delicate, but functions with uncanny strength. Also available from my shop: www.kevinwei.com

Eggbot - Like Robby the Robot, but his head is an egg!

Eggbot takes his inspiration from the mechanical marvel that is Robby the Robot from the 1956 science fiction classic, Forbidden Planet.

Able to serve up an egg in English, he's at your disposal with 187 other languages along with their various dialects and sub-tongues.

Note that Eggbot is safe for food, however the unglazed base is slightly porous, so he should be washed only in warm soapy water, not the dishwasher.

"Peep" is a series of pendants. The parts are designed to be fully movable. It makes a great gift to yourself or to someone you really like or love. ***The chain is not included in the delivery.

My 3D printed medium mesh purse (6.3 x 5.3 x 1.8 inches, closed) featuring a sturdy, flexible mesh design and a reclosable clasp. See my smaller Small Mesh Purse. Two sizes of carrying straps are available separately: 45-inch chain strap, or 36-inch chain strap. View more 3D printed bags and purses here: VertigoPolka - Bags and Purses.

---

Want to get a set

(medium purse and 36-inch strap)?

+

---

Want to get a set

(medium purse and 45-inch strap)?

+

---

Here is a cubic interpretation of the classic trefoil torus knot.

There are also 50mm and 1-inch versions of this shape without the hanging loop.


Check out additional models of knots and torus knots in my Knots section, and see more of my pendants in my Pendants section.

This pendant is designed to hold a small cylindrical object 22mm in length and 12mm in diameter. The two halves are held together by a necklace cord (not included). It is designed for a 1mm leather cord, but any cord 1mm or less will work.

Privacy screen for your laptop webcam. Just clip it on when you don't want to be spied upon! Fits most sizes from thin to medium thick laptop screens.

A Beautiful Seahorse Pendant. The metal example shown is in Glossy Antique Bronze material. There's a ring on the top of the head for a necklace. Makes a great gift. $27.78 in Antique Bronze Glossy material. Comes with a 22-1/2" inch-long chain upon request.

This ring will be avalable to order shortly once we are 100% happy with the design.

Kingdom: Animalia
Phylum: Chordata
Subphylum: Vertebrata
Class: Mammalia
Order: Artiodactyla
Family: Cervidae
Subfamily: Capreolinae
Genus: Odocoileus
Species: Odocoileus virginianus, the White-tailed Deer.

The word ‘deer' once referred to all wild animals that weren’t easily caught or domesticated – they are animals that can not be owned. O. virginianus is native to the continent America. Native Americans and early settlers utilized their hides to make buckskin leather.

Deer possess many glands that allow them to produce scents that are used to attract a mate or to mark territory. Some of these scents are detectable by humans and have been used for thousands of years as a fixative in perfumes; The word ‘musk’ originates from Sanskrit muṣká meaning ‘testicle’.


The Ring:

This ring is made using 3D Printing.technology.
It is available in either stainless steel or silver.
It is available in sizes XS, S, M, L, XL. - ring size chart

My 3D printed small mesh purse (3.8 x 5.3 x 1.8 inches, closed) featuring a sturdy, flexible mesh design and a recloseable clasp. See my larger Medium Mesh Purse. Two sizes of carrying straps are available separately: 45-inch chain strap, or 36-inch chain strap.
View more 3D printed bags and purses here: VertigoPolka - Bags and Purses.
Due to size limitations, colors are no longer an option for this product. :(

---

Want to get a set

(small purse and 36-inch strap)?

+

---

Want to get a set

(small purse and 45-inch strap)??

+

---

Silver Demon Skull Bead
Hole size: 6mm
Estimated weight: 27 grams

The bead in the image above is in standard silver. I gave it a light polish and aftermarket patina.

If you want it patinated and polished, please contact me directly.

“But it is one thing to read about dragons and another to meet them.” ― Ursula K. Le Guin, A Wizard of Earthsea

Meet Kynar. Small enough to nestle snugly in your palm, fierce enough to leave indelible marks in unwary fingers, inquisitive enough to ride on your shoulder for hours, absorbing the essence of the world around him.

Treat him well, feed him carefully, and mind the scales in shedding season.

SNAKE Necklace is a part of an entire jewellery set including armband and ring. Is produced with strongest nylon material that it has a good heat resistance and flexibility using the 3d print technology. All pieces are wearable and comfortable, light and pleasant to touch. The collection is available in different colours and sizes. Thanks to its modern and contemporary design it is easy to wear in combination whit different clothings, easy to wear every day or for a particular occasion. The SNAKE necklace is also available in different size. www.darioscapittadesign.com

This centipede has hinged legs, body segments, and antennae; it is fully posable. The sculpture is inspired by the "jizai okimono" of Meiji-era Japan, which were fully posable handmade metal figures of real creatures.