Use code STOCKTOBER16 to get 20% off your own designs on orders over $100. Details


3D modeler, Designer, Product designer, Artist

We are 3 friends @The Verse. We love the possibilities that 3D printing has to offer for the future. NO ITEM HERE IS A TOY FOR DISPLAY ONLY!

S:AaB SA-37 Endo-Exo Hammerhead Fighters x10
Mechanoid @weregobbie, So you want these at 19mm length, each. Is that correct? That wouldn't be 1/1000 scale. So I would post them under the 'Odd Scales' section, if I understand your request.
Mechanoid added products to a list
17 days ago
Mechanoid added products to a list
18 days ago
Spacer1999 Transports 1/1000 Scale
Mechanoid @Greigor, The full color picture is of a painted and detailed set that came from a customer sharing the finished set with me. But that's not how the set is shipped out. The other picture is of the model set itself. against a blue screen. Which does just barely show the spur. The last option is the 3D rotated screen. Which clearly shows the spur. Again I am sorry you didn't click those other pic's to see it, or that you didn't ask questions about the scale. And then judged the entire set against a painted and detailed set from a customer. I am however also concerned that your continued ranting about the size of this set, is on purpose in some manner. Like you want to make sure I have no choice but to remove this set. I have already had someone mention your rant to me personally, as an issue for them.
Mechanoid @Greigor, If you look at the description, the measurement states width at 6.57mm, That is all 5 ships lined up next to each other. I have not given wrong information, lied or mislead the public. I am sorry you misread it. But that is not my doing. If you want a special scale of this, I maybe willing to do it. This model has been up and working at this scale since 2013. I made a small change when ShapeWays made a guideline change. But the scaling has not been changed. Again I am sorry. But you misunderstood the scale.
Mechanoid @Greigor, Out there on the world wide web, is many different idea's of what the true scaling is. These were scaled using actual footage from the show and adjusting the scaling to also take into account the interior shown. For 1/1000 scale, 1 mm is equal to 1 meter. Meaning that the side hatch on the pod had to be 1.9 meters or 1.9 mm tall. I am not sure what you get 20 mm is 1/1000 scale. But I'd like to know. Because I know that data with the size of 76 ft (23.16 m), the Pod door is 4.2 ft (1,3 m) x 4.2 ft (1,3 m) and is a little bit to small for a man to pass thru. Which the show showed possible, which means that the 76ft data online is wrong. The scaling was as stated above, done to fit the pod bay side hatch's.
Mechanoid commented on Klingon Transport 1/1000 by coelian276
August 10, 2016
Klingon Transport 1/1000
Mechanoid @coelian276, I didn't know the true size of it. I was going off some details. But knowing the size now, I'm more than pleased. It's on my list for my next order, maybe several of them infact. And will serve nicely with my 1/1000 scale fleet. Look at my shop, under the Scampers tab to see my fleet.
Mechanoid @coelian276, Far out. I honestly was thinking it would have been almost twice the size of the other. But this works. Thank You.
Mechanoid favorited Klingon Transport 1/1000 by coelian276
August 10, 2016
Mechanoid commented on Klingon Transport FUD by coelian276
August 8, 2016
Klingon Transport FUD
Mechanoid Any chance of getting this in 1/1000 scale? If it's bigger, it should work for WSF material. I try to support other shops as much as I can.
Mechanoid favorited Klingon Transport FUD by coelian276
August 8, 2016
Mechanoid favorited Iveco Strator by DecalPrint
July 27, 2016
Mechanoid commented on Spacer1999 Emergency Shelters by Mechanoid
June 21, 2016
Spacer1999 Emergency Shelters
Mechanoid @johnmck21870, Please check my shop again. I didn't realize the 2 different Eaglet sets I had, had gotten shut off. But they are now updated, spurs to keep them together so ShapeWays doesn't lose them, Even lowered the price because of the spurs. Enjoy. I'll send you a private message linking you to the sets I updated since your post.
Mechanoid commented on Rob-Bot 1/87 V2 by Mechanoid
June 8, 2016
Rob-Bot 1/87 V2
Mechanoid @fatherjay, If the dome was missing, then it had a print issue that has never happened before. Start by contacting the ShapeWays Service Team. Provide them with your order number, and if you can a pic or 2 showing the area that the dome was suppose to be attached at. That will help them figure out what happened. Also Contact me thru the Contact Designer tab just below the Favorite tab, up the right side of the page. Include all info and a pic, Please. So I can try to work with ShapeWays to get this resolved at no cost to you.
TT Type 40 Mark 1 TARDIS 1/87 Scale
Mechanoid @fatherjay, The hole up top is 1.40mm diameter. I wish that Radio Shack still did the electronic parts racks. I would have just told you to go there. But I am not sure where to send you to get a blue led node at. Maybe a hobby story. I wish you the best of luck at it. The hole may require being drilled out to allow for something bigger. At any rate. Good Luck. Please share pic's when your done, it sounds like it would be neat to see.
Mechanoid @fatherjay, You could try something like these.
Mechanoid added products to a list
May 22, 2016
Check out this cool product! - Updated info Explorer One 1/1000 Scale
Mechanoid favorited Miniature Dinos by ThinkerThing
May 8, 2016
Mechanoid commented on (Armada) 3x ATR-6 by Mel_Miniatures
April 10, 2016
 (Armada) 3x ATR-6
Mechanoid @Mel_Miniatures, This comment is seriously late in being posted. For that I am truly sorry. I got this set back in January. I put these up against some ships of mine in 1/1000 scale and found that these are perfect for that. There is a piece on each side that is tall enough to be seen as a hatch. For that reason I am sticking these in my collection in 1/1000 scale. 'Me Likey', Keep up the great work.
Mechanoid added a product to a list
April 10, 2016
Mechanoid commented on Explorer One 1/1000 Scale by Mechanoid
April 4, 2016
Explorer One 1/1000 Scale
Mechanoid @josh_m_richman, This does not meet the guidelines for metal materials. To make this to pass for metal or steel would require a nearly major redesign. Something I am not able to do at this time. Due to health issues of late.
Mechanoid favorited Apollo 11 Astronauts 1:87 by Max_Grueter
March 31, 2016


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.