Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.

This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!

NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small

Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !

Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.

Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.

Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later. +

 This 2in wide cuff is truly a bold accessory! It features a flexible C-shaped design that fits closely against the wrist. It was grown from 4 separate root points which gradually intertwined into a single network.

watch the video to see how it was created!

Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.

A fine network of vessels defines the surface of this crescent-shaped pendant which was inspired by how veins form in leaves. The densely interconnected structure is at once airy and strong.

It is a part of Hyphae, a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge.

Watch the video below to see the the form was created.

--
If you are interested in purchasing the necklace with the chain, please buy from our website
nylon plastic version: http://n-e-r-v-o-u-s.com/shop/product.php?code=85
sterling silver version: http://n-e-r-v-o-u-s.com/shop/product.php?code=96
 
If you purchase directly from Shapeways it will not come with a chain.

A Voronoi network wrapped onto a Möbius toroid.

Cubichain bracelet (for custom sizes)
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)

Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.

Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 to 24cm/5.5 to 9.4 Inch.
Actual length may vary about 5%, but material will stretch a little bit.

Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
Enter this cm value in the Inner Length field.

Popular sizes
You can order most popular sizes directly via the links below, this is cheaper and faster!
XS 14 cm/ 5.5 inch
S 16 cm/ 6.3 inch
M 18 cm/ 7.1 inch
L 20cm/ 7.9 inch
XL 22cm/ 8.7 inch
XXL 24cm / 9.4 inch

A matching necklace available here:
Cubichain Necklace 8

Remove Label
To aid in production and sorting the model will be labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.

Even if your neighbors complain, you can keep it turned up on your sleeves.

Detailed Raven Mask Necklace Charm. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca Only $39.99 in Gold Plated Glossy. Successfully printed in a variety of materials, bars are approximately 2-3 mm.

Product Name "Keyboard Ring". Designed by Japan.
Type can be chosen the command key or the ctrl key.

Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.

The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
And key type choose the command key or the ctrl key.

Conversion chart for ring sizes

US Ring Size      Inside diameter
       8                         18.1mm
       9                         19.0mm
      10                        19.8mm
      11                        20.6mm
      12                        21.4mm
      13                        22.2mm


Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma

FORMA Laboratory Facebook Page!

These filigree earrings look delicate almost like lace, yet are flexible and very resilient and should last you a life time assuming a monkey doesn't eat them. They are so light that you wouldn't even know you are wearing them.

Here they are shown in the "White Strong & Flexible" material, but are also available in other colors as well as silver. They are each about 1.5 inches long and .75 inch wide.

Product Name "Ring of the gamer". Designed by Japan.

Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.

The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.

Conversion chart for ring sizes

US Ring Size      Inside diameter
       8                         18.1mm
       9                         19.0mm
      10                        19.8mm
      11                        20.6mm
      12                        21.4mm
      13                        22.2mm

Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma

FORMA Laboratory Facebook Page!

IMPORTANT INFORMATION!!!
If you want to get a polished and fully functional QR code pendant, set the delivery address to my one (I will provide it by a private message). I need to get the product first to finish it and then send to you.
This QR code tag can contain any encoded message that you wish (min. 18, max. 32 characters). If you want to make it a functional url tag, you need to include "http://" part!!!

The QR codes are now used in many spheres of life. They can contain numbers and letters, so you can encode any kind of text information, be it address, phone number, message, name, web link, etc.

Most of the modern mobile phones (and apple iphone was one of the first to feature this technology) can decode the QR codes, making QR-coding a funny, easy and peculiar way to say something.

You can use this tag as a keychain or as a pendant.

Also, check out this colored plastic tag!! It's cheaper, it's bigger and it's colored! :)

Other Sizes available: scroll down to see. When I model in 3D it often feels like I'm sculpting. I build each piece, put it into place, tweak/adjust, then add the next piece. With the Triangulated cuff I really wanted a design that seemed minimal yet dynamic, and I adjusted my model until I got the effect I was satisfied with. The final result was 3D printed in a black plastic nylon material (BSF - Black Strong & Flexible). It's a very lightweight yet strong and flexible material (as the name implies). The ends of the cuff are rounded so it slides on and off easily. Sizing: *Size Extra-Small/Petite interior dimensions: 2 1/8 inches wide x 1 1/2 inches tall [54mmx38mm]. Available from Shapeways here: http://shpws.me/3qW1 *Size Small interior dimensions: 2 1/4 inches wide x 1 3/4 inches tall [57mmx44.5mm]. Available from Shapeways here: http://shpws.me/3qW0 *Size Medium interior dimensions : 2 1/3 inches wide x 2 inches tall [59mmx51mm]. Available from Shapeways here: http://shpws.me/3qW2

An organic 3d-printed lamp that projects incredible shadows. It can be used as a pendant or table lamp.

The seed lamp plays with reaction-diffusion at different scales to produce an organic effect. A simple sphere grows into a complex sculpted surface by layering reaction patterns at a micro and macro scale. The larger scale pattern creates the overall topography of the lamp while the smaller scale modulates the surface thickness to reveal a cellular texture when lit.

For this lamp, the patterns at both scales are cellular, however the surface is punctured only according to the disposition of the smaller scale. We were inspired by microscopic images of seeds where both the overall shape of the seed and the cells of which it is composed are visible.

Light Fixture
The lamp comes with an eco-friendly 3-watt LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and plugs into the wall. The light fixture can be purchased separately from us, email us at hello@n-e-r-v-o-u-s.com

Artistic bracelet 001
-inner diameter is approximately 70mm
-il diametro interno è approssimativamente 70mm
-diamètre intérieur est d'environ 70mm
-diámetro interno es de aproximadamente 70 mm
-innere Durchmesser beträgt 70mm
-內徑約 70毫米

This is a version of the polyoptic bangle with a handsome split to fit over larger hands. The central hole is 65mm round, but can open up to about 80mm.

Impress with less.
This Ring is inspired on a square cut stone. Keep it pure or dress it up to match your daily fashion style by placing a shiny wrinkled candy wrapper or a piece of fabric.
This extravagant ring can give disposables a second and value added life.
Available sizes:
ring06 17: diameter 17mm (USA 6¾)
ring06 18: diameter 18mm (USA 8)
ring06 19: diameter 19mm (USA 9¼)
ring06 20: diameter 20mm (USA 10¼)
ring06 21: diameter 21mm (USA 11½)
ring06 22: diameter 22mm (USA 12¾)

Besides this Ring and the larger RingXL there is also a ‘Cling’ design, a jewel that is hold by a naturally way between two fingers. When interested in reselling please contact iZign for the resellers price list.

This pair of loosely entangled bracelets is based on Gyroid bones.
A very elegant variation on the mathematical equation.

This is the slim version
Width : 14mm / 0.6 Inch
Thickness : 9mm / 0.4 Inch
Size/Diameter : 40 - 70mm / 1.6 - 2.8 Inch

Each size is custom created for a uniform look and feel over all sizes.
It's quite flexible, so you can easily slide it over the hand.

If you would like a small opening in the bracelet so you can have a tighter fit, please leave a remark.

Broad version available here.

This version of our anchor lacks the crossbar, so it's more comfortable, though less historically accurate. If you're not stopping boats, you'll be stopping heads. This product ships without a chain.

 Faceted Cuff in Size Medium

 I've always loved faceted structures, especially irregular ones that are becoming more and more common in architecture thanks to new technologies. They seem to have such complexity and they appear different from every angle you view them. Those are qualities I was looking for when I created the Faceted Cuff. I designed the model for the Faceted Cuff much like it might be built if it were an actual structure. I began with a series of frames with the same number of varying points. Once these were arranged in the shape of a cuff I added interconnecting members, one by one. I kept the sizing of each member small enough so that it would give the appearance of a delicate structure that in reality was quite strong. The final result is 3D printed in White Strong & Flexible Polished so that it is smooth, lightweight, and of course strong and flexible.
The size as shown is MEDIUM, but you can also order it in X-Small and SMALL (see links below). See the guide in the last photo for how these are measured: 

MEDIUM - 
Inside dimensions 2 5/8" across, 1 7/8" in height
67mm across, 48mm in height 

SMALL
http://www.shapeways.com/model/277649/faceted_cuff___in_size_small.html?gid=ug

X-SMALL
http://www.shapeways.com/model/277781/faceted_cuff_in_x_small.html?gid=ug



 

Product Name "303 Acid ring". Designed by Japan.

Available in either stainless steel (antique bronze & gold plated) or silver.

The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.

Conversion chart for ring sizes

US Ring Size      Inside diameter
       8                         18.1mm
       9                         19.0mm
      10                        19.8mm
      11                        20.6mm
      12                        21.4mm
      13                        22.2mm

Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma

FORMA Laboratory Facebook Page!