This is a mobius strip of Level 1 or Super Mario Bros. The whole level is wrapped around itself in a single surface, and poor Mario begins and ends at the same spot every time :(

All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.

It's a great piece to have on your desk, or to hang from a string to let it spin around.

I created the skeleton of a skeletal Lepidoptera. The Death's Head Hawkmoth (Acherontia atropos), seen on The Silence of the Lambs , has a skull marking on its back. I made a full human-like bone structure for the moth, with the grinning skull protruding from its back.

The model is very thin, yet sturdy and flexible. Detail level is fantastic, and the natural texture of the 3d printing process gives it a bone-like appearance that works wonders.

Yes, moths don't have endoskeletons, that's the whole point...

Check out my blog: http://dynath40k.blogspot.com/ Ok so I can't edit my original description. great. I'm redoing this model to print in FUD exclusively. Expect higher detail and lower FUD cost. All things in good time.

[UPDATE] 24/01/2013:
The amulet is now available in a few smaller sizes:
Amulet 3.5cm

Amulet 3.0cm

///////////////
Amulet is 4 cm (1.6 in) with increased details!!!
(like the mouth and eyes, to make the lines more visible)
For the ones who think it's a bit to dark i would suggest to order it in Gold Plated Glossy.

Amulet comes without a cord!

For infos about the materials pls check this site: http://www.shapeways.com/materials/steel

This amulet was inspired from the amulet which Dean Winchester is wearing in the TV-Series SUPERNATURAL.
Should be very screen accurate.

Please rate the amulet if you like it. Thanks! :)

Neue, überarbeitete Version. Auf 4cm vergrößert und Detailgrad erhöht!!
Details an den Augen und dem Mund wurden ebenfalls verstärkt, um sie deutlicher zu machen.
Wem das Material "Antique Bronze Glossy" zu dunkel ist, dem schlage ich vor "Gold Plated Glossy" zu wählen :)

Dieses Amulett ist inspiriert von der Halskette die Dean Winchester in SUPERNATURAL trägt. Habe sie möglichst detailgetreu nachempfunden und kommt dem Original sehr Nahe finde ich.

Hoffe, es gefällt euch :) Dürft es gerne oberhalb dieser Seite mit den Sternen bewerten. Danke!

Ring in the form of an octopus.
Default ring size is 18.5mm (various sizes available).
Also available as bracelet.. Please contact us

The Neverending Story AURYN Medallion. The model is hollowed out on the backside, backside is flat with grooves. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca

A detailed full color model of each of the first six planets (out to Saturn) and major moons of the Solar system, to (logrithmic) scale.
(Note: the full Solar System set of planets and moons is available as a set here)

All surfaces are reproduced from NASA imaging.
For size reference, Jupiter is 22mm (0.9 inch) diameter, and Earth is 11mm (0.45 inch) diameter.

This set is designed for use in orrery or other models of the solar system, and so to best present all planets while preserving scale, the scale has been compressed - a logrithmic scale instead of a linear scale. This means that if the model of a moon of Jupiter is larger than the model of Mercury but smaller than Mars, then you know that the real moon really is larger than Mercury and smaller than Mars, But the size diference is compressed - Jupiter, which is really more than ten times Earth's diameter, becomes only twice Earth's diameter, etc. This logrithmic scale allows all planets to be clearly visible together, while at the same time still indicating their sizes relative to each other.

The set contains six planets, and nine moons:
[In order of appearance in the photo above, right to left]
Mercury
Venus
Earth
 - Moon / Luna
Mars
Jupiter
 - Ganymede
 - Callisto
 - Io
 - Europa (attempt no landing there)
Saturn
 - rings of Saturn
 - Titan
 - Rhea
 - Iapetus
 - Dione

All objects have a 1.3mm (0.05 inch) hole at the south pole, about 3mm deep, for a brass axle (or a toothpick).

What color is a planet - is it color of its surface materials, or the colour of its atmosphere from space, or the color of the surface being colored by the atmosphere filtering light from the sun? The appearance in this set attempts to be that of the surface with moderate atmospheric influence, (with the gas giants depicted as the atmosphere and surface being the same thing). For example, this means that Venus depicts the features of its surface, but they are tinted somewhat by its atmosphere. Similarly, Earth and Titan show ground features, but some areas are tinted and obscured by atmosphere.

In areas where the model surface is more detailed than the most detailed NASA photography, the overall surface appearance conforms to what is known, but finer textural details are speculative. (Or, if there is an atmosphere, it is shown as particularly thick and opaque over the unmapped area.)

Due to hard limitations of the Shapeways 3D printer, the moon Dione is using the surface map of Rhea. I chose Dione because the surface is very similar to Rhea, and it is the most minor moon in the set. The alternative was simply to remove an object, but I preferred the set to include four of Saturn moons, like it does for Jupiter.

Beautifully designed Dragon Claw Bracelet by: Sheila Munro. Inner circumference measurement is 19.5 cm. Inner Diameter is approximately: 65mm Distance between claws is: 32 mm. Wearable on the forearm as well. Medium version. Please contact for a custom size, also currently available in SMALL & LARGE. Please DO NOT try to bend open with metal prints to avoid any risk of injury! The metal will not bend, this is a strong, sturdy bracelet in metal. If these sizes will not fit you I will make a custom size no extra cost. ancienteyes@shaw.ca

 Linked gears rest within a larger gear, all lined with faceted teeth. The hole is large enough to string this pendant on a metal chain.  2 cm Diameter.

A certain key from a certain film.

New BSG Viper Mark 2 , supposed to be printed in WhiteDetail as parts. Needs assembly and painting ofc. I wonder how this will turn out... Oh, and it`s supposed to be an 1/72 scale model.

Update: finally got around to add some photos, they are pretty bad sorry. You can notice that the nose is parted at the cockpit due to badly cementing the pieces together :( The paintjob is very poor and far from finished, but I had no time or paint to do it with except for some water colors back then. Printing detail is pretty good, but the layering is very obvious in some places, although its mostly hidden on the shots because of the thick layer of bad painting :P (and please ignore my cats hair all over it :) )

Necklace with a squid forming a heart with his tentacles. Update: I had to update this model after a problem printing in silver. They had a problem with one of the suction cups (Yes, just one). Has now printed successfully in silver..

Nothing says true love like a slimy clutching cephalopod! This little beauty is gently caressing a dangling heart. You supply your own chain.

Be an honorary member of the Targaryen with the Game of Thrones Targaryen Ring. Available in sizes 5-14

Higher resolution version of the firebug model. Shapeways can't print this, but you can make one for yourself on any home printer. Here's the file: http://www.thingiverse.com/thing:11683 - now why don't you get yourself a printer and start making things?

This was done for "EngineerVsDesigner Necklace Design Competition". I have printed 2 links only. For good neckalce you will need at least 3 links. They connected throught an easy hook.

Detailed Dragonfly Wing Bracelet. Medium Size.

Detailed Dragonfly Wing Bracelet. Medium Size.

Don't hang your stuff on an ordinary wall hook when you can have it held by the Kraken!! I've done my best to make this little novelty as affordable as possible by hollowing it out and making it rather small. In order to mount this hook on a wall, you will need to get some wall mounting adhesive strips or something similar. Even if you don't end up mounting this on your wall, it still makes a nifty desk decoration!

Time turner, inspired by the world of Harry potter. Designed to have moving parts. Due to printing errors, it's temporally unavailable for sale until it's fixed.

Time turner, inspired by the world of Harry potter. Designed to have moving parts. Due to printing errors, it's temporally unavailable for sale until it's fixed.

An octopus, 2 cm high to sit on your desk and enjoy the scenery. The head is hollow to reduce the price.

Highly detailed Dragon Wing Pendant designed by Sheila Munro. Please contact for a custom size. :) E-mail: ancienteyes@shaw.ca