by
TheoJansen
[Note: This propeller propulsion add-on does not include a 3D printed Strandbeest, which should be bought seperately! This propeller does not fit the Ondula version!]
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
by
virtox
Phamora Ceramics!
Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!
A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.
Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.
Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.
Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!
A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.
Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.
Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.
by
cunicode
one cup a day
Day 09: Low Resolution Cup
30 days, 30 coffee cups project
View the collection
Day 09: Low Resolution Cup
30 days, 30 coffee cups project
View the collection
3D Print in Ceramics vs. 3D Model
review & details
by
VENERIDESIGN
Flower Pump is inspired by the muscle of love,
...every artery leads straight to the heart ....
...every artery leads straight to the heart ....
by
cunicode
one cup a day
Day 11: Hard to Handle Cup30 days, 30 coffee cups project
View the collection
Day 11: Hard to Handle Cup30 days, 30 coffee cups project
View the collection
3D Print in Ceramics vs. 3D Model
review & details
