Kitsunerei

fox-dream.com kitsune-rei.deviantart.com

Expertise:

  • Artist
by JoshuaHarker
The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. This is the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time. Small is pictured sitting in the hand. See pic of all 3 sizes together for comparison.
 
(42)  
  •  
From: $95.00
 
by HashBrony
Stylized cartoon horse - DJ
 
(31)  
  •  
From: $36.40
 
by Whystler
The nocturnal (or nocturlabe) is a very old instrument for telling time at night by measuring the stars. While concept is ancient, this design is all original. It is fully functional (all dials move properly) and meant to be worn as a pendant. This is now available for sale, as it has been tested and works nicely.

How to Use the Nocturnal:

The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.

Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.

Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.

Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.

Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.

So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
 
(49)  
  •  
From: $22.89
 
by fakebusker83
Version 1.6

A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.

Radicon thread here.
Flickr thread here.
 
(5)  
  •  
From: $9.00
 
by tedparsec
...but not that cheap...
 
(46)  
  •  
From: $16.25
 
by Calistotash
Meet Chrysalis, Queen of the Changelings. She wants your love...so what are you waiting for?
 
(8)  
  •  
From: $56.70
 
by macouno
The original Petunia model.
 
(32)  
  •  
From: $44.16
 
by BAROBA
This version is for metal or other materials that need additional thickness
 
(13)  
  •  
From: $5.78
 
by Vidalcris

In collaboration with KP-ShadowSquirrel



My shop
 
(4)  
  •  
From: $34.99
 
by aeron203
These decorative keys can commemorate a relationship, symbolize a secret, or simply be worn as an accessory.

The key can be printed with custom text, about 18 characters on each side.
 
(19)  
  •  
From: $37.00
 
by Vidalcris

In collaboration with KP-ShadowSquirrel



My shop
 
(3)  
  •  
From: $29.62
 
by Silverbeam
 
(0)  
  •  
From: $16.49
 
by Bites
Almost as awesome as the real thing.

Do not handle roughly! This is a collectible, and is unfortunately not tonka tough.
Don't place this in a liquid or near extreme heat!
 
(0)  
  •  
From: $31.36
 
by MichaelMueller
In many cultures, the fox appears in folklore as a symbol of cunning and trickery. Like "Reynard the Fox", a medieval charistmatic character who is always in trouble but always able to talk his way out of any retribution.

I like to be clever more often, too. Not to trick but to convince when it's needed.

The Fox Whistle can be used as a pendant, so it's always to hand.

Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
 
(1)  
  •  
From: $83.97
 
by friz
A 50-sided dice based on a pentacontahedron. The faces are triangles, squares and rhombi. Second version, hollow.

UPDATED VERSION, THICKNESS > 1 mm PRINTABLE ALSO IN DETAIL MATERIAL
 
(4)  
  •  
From: $10.99
 
by Silverbeam
inspired by the anime sakura card captors, here is the key that transforms into her first wand. 1/4 scale....aprox. there is a hole at the top for a chain to go through.
 
(1)  
  •  
From: $6.88
 
by extrudedqwerty
Kirby Star Rod custom stylus for Nintendo DS
 
(5)  
  •  
From: $12.62
 
by extrudedqwerty
Not tested yet. Recommended to write with the handle, not the brush. Special thanks to :DAN for the idea and corrections.
 
(4)  
  •  
From: $12.41
 
by Bites
Our favorite lunar princess, at full power!
 
(1)  
  •  
From: $40.00
 
by Kouri
Solid Fox Miniature.

Stands a little over an inch tall (3cm) and is available in Orange, Purple, Blue, Black, Gray, and White. Alternate colors available upon request.
 
(0)  
  •  
Not For Sale
 
by Silverbeam
grab a 15mm diameter dowel rod to fit into the top and bottom pieces for the wand, do any sanding needed to smooth, paint and seal with a clear varnish. Life sized sailor moon wand. Professional Cosplay, costume, and fun! email me to ask for different sizes or commissions. bowenlady@gmail.com
 
(0)  
  •  
From: $138.97
 
by extrudedqwerty
Piranha Plant stylus for Nintendo ds.
 
(4)  
  •  
From: $14.92
 
by Bites
Presto, the outcast illusionist changeling and his hat, Hat.

http://ask-presto.tumblr.com/
 
(1)  
  •  
From: $50.00
 
by Silverbeam
Life sized version, painted with acrylic paint in picture.
 
(0)  
  •  
From: $19.85
 
by Silverbeam
Available for dye and polish! Buy pre-assembled at my etsy store: http://www.etsy.com/shop/Silverbeam OCTOLING: This little boy, is part boy and part octopus! He has 8 interchangeable tentacles that are held together by strong little magnets. He is easy to color and customize, and wants a good home. *He comes with one free pair of eyes!* See the shop for the add on pack (full blush up, wig, outfit) It will be added soon! Silverbeam's Magic is starting a brand new line of dolls, Littlings are tiny ball jointed dolls made via 3d Printing. first they are modeled with a 3d editing program, from foot (or tentacle) to the top of the head, adding in joints and sectioning it into limbs and parts. It is then uploaded to special printers that layer upon layer create the model in real life. If is then sent back to our shop, where we check it over, adjust or fix any problems, string it, and pack him up to you. These dolls are currently all fantasy based and make a great collection. they can be sanded, customized, painted, face/blush up,, just like any BJD, perhaps even easier. The material has a slight grain to it so it is easier to apply color, and they can be dyed as well. Eyes: aprox 5mm Head Circumference: aprox 6 cm (2.25 inches) Height: aprox 7 cm see old version on youtube (this version here has better joints!) http://youtu.be/INfVs9HkaSA
 
(0)  
  •  
From: $59.05
 
by Brian123
Kiki the Lemur. Character created by artist Henrieke, sculpted by me. This a test pose. It will be for sale and possibly another cuter pose, plus some general refinements.
 
(0)  
  •  
Not For Sale
 
by Bites
Your very own moon princess pony. Honestly, what else in life would you even need? To get her in full colour, you're going to want to select 'Full Color Sandstone' as your material.
 
(0)  
  •  
From: $40.00
 
by Silverbeam
1/4 scale
 
(0)  
  •  
From: $19.47
 
by Xender90
 
(0)  
  •  
From: $30.03
 
by Silverbeam
Inspired by the anime sailor moon, this is a life sized version of Jupiter's transformation wand.
 
(0)  
  •  
From: $77.80
 
by Silverbeam
1:3rd size, easily wearable on a chain on your neck.
 
(0)  
  •  
From: $14.79
 
by Bites
Exactly what it says on the tin: A basic, standing alicorn pony. No tail, no hair, no color.

This is for customization purposes - if you want to make your own pony and it's not available here, you can buy this one and customize it yourself!

Note: Some weaker materials MAY NOT PRINT! I've tried my hardest to make sure the model you see here prints properly with all materials, but I have no money of my own to be certain! If you order, and it ships, please tell me what material you used, and send pictures!

Enjoy your ponies!
 
(0)  
  •  
From: $36.11
 
by Bites
Poop butt fart!
 
(0)  
  •  
From: $50.00
 
by Bites
What a cutie!
 
(0)  
  •  
From: $50.00
 
by walterdeleon
 
(0)  
  •  
From: $10.01
 
by Silverbeam
 
(0)  
  •  
From: $99.81