Kidmechano
Bot maker, guerrilla product developer, newbie modeler, ModiBot.com Flickr- http://www.flickr.com/photos/gogodynamo/ - Twitter @ModiBot_Mo
Expertise:
- 3D modeler
- Designer
- Product designer
- Maker
by
TheoJansen
[Note: This propeller propulsion add-on does not include a 3D printed Strandbeest, which should be bought seperately! This propeller does not fit the Ondula version!]
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
by
fakebusker83
Version 4.0
A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.
It comes with 2 cannon/piledriver accessories.
You can also arm the Thugger with either Driller or Slammer accessories!
Radicon thread here.
Flickr gallery here.
A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.
It comes with 2 cannon/piledriver accessories.
You can also arm the Thugger with either Driller or Slammer accessories!
Radicon thread here.
Flickr gallery here.
by
fakebusker83
Version 1.6
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
by
fakebusker83
Version 2.0
A pair of posable hands for the Dark of the Moon Leader class Ironhide figure! Each finger is double-jointed, the wrists and thumbs are also ball-jointed, and the hands still fit behind the windscreen in his alt mode!
Not for casual collectors. You will need a dremel and some skill to install these hands.
I recommend these to be printed in Strong Flexible material for maximum reliability.
Radicon thread here. (With installation instructions)
Flickr gallery here.
A pair of posable hands for the Dark of the Moon Leader class Ironhide figure! Each finger is double-jointed, the wrists and thumbs are also ball-jointed, and the hands still fit behind the windscreen in his alt mode!
Not for casual collectors. You will need a dremel and some skill to install these hands.
I recommend these to be printed in Strong Flexible material for maximum reliability.
Radicon thread here. (With installation instructions)
Flickr gallery here.
by
fakebusker83
Version 2.0
This is an update for the pair of hands I did for ROTF Leader class Optimus Prime. Much time has been invested in making them look as movie accurate as possible. These hands, like their predecessors, are fully articulated with ball joints on the fingers, thumbs and wrists and they are capable of holding 5mm peg mechtech weapons as well as his original rifle!
Recommended materials: Strong Flexible
This is an update for the pair of hands I did for ROTF Leader class Optimus Prime. Much time has been invested in making them look as movie accurate as possible. These hands, like their predecessors, are fully articulated with ball joints on the fingers, thumbs and wrists and they are capable of holding 5mm peg mechtech weapons as well as his original rifle!
Recommended materials: Strong Flexible
by
Mr_props
a fully articulated mini figure that can twist torso and bend knees. Made to be compatible with most brick brands. Please be gentle when connecting parts together especially the knees. If you order it with a coloured material, you may have to remove some of the polyamide powder that will be stuck inside the knees' joints (you can remove it using a toothpick).
by
Mr_props
a small ball and socket character to play with and customize. Can be used with most famous bricks. Please be gentle when assembling the parts. Any comments are welcome :)
by
edrice
First figure of my original character Cpt. Kraken. Set in a spoof world of video games, this first statue in a series visits Mario's mushroom kingdom!
by
Psychobob
Every Team Fortress 2 Engineers must have tool; the Sentry Gun!
Been busy taking out enemies? Time to upgrade your sentry then to a more deadly version; level 2!
This model contains parts needed to build the "level 2" sentry gun.
You will also either need to have already purchased the parts for "level 1" or purchase them along with these parts before you can build the level 2 gun. Once assembled with level 1, the model is approximately 8.5cm x 10.5cm x 8.5cm from it's longest points. A link to the level 1 parts can be found below, along with a link to level 3 parts if you wanted to upgrade to the deadliest version of the sentry gun.
Level 1
Level 3
The YouTube video linked demonstrates the assembly of all levels along with some additional information.
Please also consider visiting my website: www.psychobob.co.uk
PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".
DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.
Been busy taking out enemies? Time to upgrade your sentry then to a more deadly version; level 2!
This model contains parts needed to build the "level 2" sentry gun.
You will also either need to have already purchased the parts for "level 1" or purchase them along with these parts before you can build the level 2 gun. Once assembled with level 1, the model is approximately 8.5cm x 10.5cm x 8.5cm from it's longest points. A link to the level 1 parts can be found below, along with a link to level 3 parts if you wanted to upgrade to the deadliest version of the sentry gun.
Level 1
Level 3
The YouTube video linked demonstrates the assembly of all levels along with some additional information.
Please also consider visiting my website: www.psychobob.co.uk
PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".
DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.
by
WelshDesigns
This is a cookie cutter, it can also be used for clay or Play-Doh.
by
fakebusker83
Version 1.5
This is a pair of giant sized posable hands meant for any of your large, combiner or city-former scaled projects! These hands are extremely posable, with each digit segmented into 3 joints and capable of creating almost every conceivable pose!
The wrist is a ball joint socket, and it works with any 10 mm diameter ball joint. This includes LEGO® Bionicle ball joints. You can also get a compatible wrist adaptor from Shapeways here.
The hands each measure 68 mm from wrist to fingertip, and 40 mm across the knuckles.
This model is successfully tested in White Strong Flexible.
Flickr gallery here.
TFW2005.com thread here.
This is a pair of giant sized posable hands meant for any of your large, combiner or city-former scaled projects! These hands are extremely posable, with each digit segmented into 3 joints and capable of creating almost every conceivable pose!
The wrist is a ball joint socket, and it works with any 10 mm diameter ball joint. This includes LEGO® Bionicle ball joints. You can also get a compatible wrist adaptor from Shapeways here.
The hands each measure 68 mm from wrist to fingertip, and 40 mm across the knuckles.
This model is successfully tested in White Strong Flexible.
Flickr gallery here.
TFW2005.com thread here.
by
Tom.B
Before purchasing please understand this kit will take a lot of time and patients to assemble. It will require a great deal of sanding and fitting, its a beast.
Version 2.0, the tripod has been removed, it was useless
The name might be farfetched, but this cannon is too. A massive heavy weapon for your DX and Voyager sized figures. When the reactor shields are opened the centrifuge can spin on a axle.
