Flower Pump is inspired by the muscle of love,
...every artery leads straight to the heart ....

This piece of art was created in 3D software by "printedCat" 3D-designer in San Francisco, California, USA and printed in nylon material by Shapeways.com in Holland or New York.

Enjoy watching!

All images are photos of real objects. "Proof Printed".

printedCat on Shapeways
printedCat.com
printedCat on Flickr
printedCat on YouTube
printedCat on Etsy
printedCat on Facebook

The Earth, Moon, and Mars, to scale, with 3D surface terrain and full color from the latest NASA space imaging.

[See also the solar system set (but note that set is a logrithmic scale, not linear like this one)]

Dimensions:
Earth: 50mm (2 inches) diameter
Mars: 27mm (1 inches) diameter
Moon: 13mm (0.54 inches) diameter

Scale: 1 : 251102362

The Earth and Mars globes are hollow, with a 12mm (1/2 inch) hole at the south pole, giving them a flat bottom on which to sit without rolling, but each also comes with a matching cap/plug to seal that hole, to form a full sphere. (The moon is solid)

Special thanks to NASA / JPL-Caltech, for allowing the use of their planet surface terrain and mapping.

This is a small version of Triple Gear.

In this unusual mechanism three gears mesh together in pairs, and yet they can turn!

If you take three ordinary gears and put them together so that each gear meshes with the other two, then none of the gears can turn because neighbouring gears must turn in opposite directions. Triple gear avoids this problem by having the three "gears" arranged like linked rings - the gears then rotate along skew axes, and the opposite direction rule no longer applies (although see also Oskar van Deventer's Magic Gears for another possible solution).

This is joint work with Saul Schleimer. We were inspired by another of Oskar's designs, his Knotted Gear, which consists of two linked rings that gear with each other, and of course we wondered if it would be possible to do three linked rings!

A note on materials: I have so far printed it in White Strong & Flexible only. It may arrive with the rings slightly fused together, but gently moving them back and forth will loosen them up, and the mechanism gets smoother with use. I'm not sure what effect the polishing process would have on the gearing mechanism, since it would polish the exposed gear teeth but not those which are meshed as it comes out of the printer. So I have disabled the polished material options. If you really want to try it, let me know. I also haven't tested any of the "frosted detail" materials, but I imagine that they should work fine. The "detail" materials require a thicker wall thickness than this model has, so it is not printable in those materials.

I ordered a test print to be sure that everything works the way it was supposed to be.

When it arrived it was not perfectly round but slightly deformed. I guess it is impossible to ship this thing in a packet without deforming it...

Nevertheless this is a nice toy to play around with. It can be squeezed or thrown against walls - In spite of it´s fine structure it is pretty sturdy.

this bracelet is proposed in 3 size, but if you have a special size...

the dimension inside the bracelet for the medium:
62mmX43mm
2,44 inchesX1,7 inches

Even fidget toys get to have a "2.0" . An updated version of the popular "One ring to rule the ball" design with fewer twists, thicker wire, and a bigger ball, "One ring to pwn the ball" takes its steampunk ancestry in a smooth, contemporary direction that's twice as ruthless with your mind--it seems doubly impossible that this ball could be solidly contained by just one short, twisting wire. With no hole in the middle for a rubber or leather strap, you'll have to go to http://www.shapeways.com/model/145208/one_ring_to_pwn_the_ball_pendant.html to wear it around your neck. But in both cases you'll get solid stainless steel with optional bronze antiquing or gold plating, and a look that ties brains in knots.

For the classic "One ring to rule the ball" design, now available on a pay-what-you-want basis, go to http://www.shapeways.com/model/52936/one_ring_to_rule_the_ball.html . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com

This prickly sphere looks amazing in 3D, you can lose your self for hours playing and being mesmerized by it.
It doubles as an acupuncture ball, roll it around on your body ( I love it on my head) to relax and circulate your blood, the skin feels tingly afterwards. 

this is a small object, designed as pendant, earring or key holder.