by
TheoJansen
The third public evolution of the Animaris Geneticus Parvus. #7 has evolved legs, with pointy feet instead of flat. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros".
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.
- The best way to push it is by its nameplate. Do not push down, but forward.
- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.
- The best way to push it is by its nameplate. Do not push down, but forward.
- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.
by
joabaldwin
This is a mobius strip of Level 1 or Super Mario Bros. The whole level is wrapped around itself in a single surface, and poor Mario begins and ends at the same spot every time :(
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
by
isohedral
An espresso cup specially designed with fins, to ensure the successful deployment of your rocket fuel. All systems are go! Paraboloid bowl holds approximately 1.5 fl oz. or 45 mL. (Note that I previously claimed the cup held 60 mL. While my 3D modelling software still reports that as the internal volume, some combination of the printing process and glazing is robbing me of internal volume. Contact me if you'd be interested in a larger, more expensive 60 mL cup.)
After receiving feedback from Shapeways, I've created a slightly revised model for the cup. I'm told that this model will be easier to print and glaze, leading to a more reliable product. The changes are minor -- it's a little wider, a little heavier, and has more rounding on edges that were previously sharp (a 3D rendering shows the differences above).
Update (April 13th, 2013): The cup has had a great run on Shapeways, and I deeply appreciate the attention and positive feedback it has received. The bad news is that I've got to stop offering it for sale here. The good news is that the cup is now available commercially! It's being manufactured by Fred and Friends, sold under the name "Blast Off! Espresso Cup Set". It's already available for purchase online (perpetualkid.com, thinkgeek.com), and I'm sure you'll be able to find it in your favourite housewares store soon.
by
Dotsan
No1 in the series of animal heads, a smaller version of the 570mm high Stag Head (which is not available on Shapeways)
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
Tiger Head 2.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
Please send your pictures and share your thoughts on the design.
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
Tiger Head 2.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
Please send your pictures and share your thoughts on the design.
by
TheoJansen
The first public evolution of the Animaris Geneticus Parvus, #5. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros". The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet.
- The best way to push it is by its nameplate. Do not push down, but forward
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet.
- The best way to push it is by its nameplate. Do not push down, but forward
by
nautsch
interlocked cubes. beam strength is about 1.2 millimeters.
This is very easy to create, but looks quite cool.
This is very easy to create, but looks quite cool.
by
colleenjordan
Why should your plants stay at home? They help clean the air you breathe, are beautiful, and create a wonderful conversation starter. Carry a sprout, a succulent, or a flower you found on your morning walk.
When buying this wearable planter through Shapeways, your necklace will come unfinished and without a cord. You can add a silver or leather cord of your choice to your necklace, or you can email hello@wearableplanter.com and we will mail you a leather cord for your planter.
by
thehumanhive
A tribute to papercraft artist Haruki Nakamura's sculpture, Gear's Heart. The assembled heart measures 8.5 cm in height (8.5 cm x 8.2 cm x 5.1 cm).
by
ThreeForm
The Lotus top is a graceful form that embraces the upper body, accentuating the shoulders and clavicles. It's name comes from its unique design that blooms at the center opening, allowing the wearer to put her head through and rest it comfortably on the neck and shoulders.
A perfect fit requires a 3D body scan. Email Contact (at) ThreeFormFashion.com for more information on full service scanning and fitting.
A perfect fit requires a 3D body scan. Email Contact (at) ThreeFormFashion.com for more information on full service scanning and fitting.
by
OneSaveSolutions
This chess set re-imagines the bodies of the traditional chess pieces to incorporate each piece's name as the focal point of their design.
It should be noted that each color/material must be ordered separately. This does, however allow for mixing and matching.
by
noesis
The CardCase is now customizable! See Below
The CardCase for the IPhone 4 does what other card carrying IPhone cases can do and then some!
The sleek, patent pending, snap-on case not only protects your IPhone, but can also replaces your wallet or current business card holder and the integrated card slot on the side allows you to use any available card as an instant stand in portrait or landscape mode! Perfect for watching movies on the go, Facetime chatting, or using your IPhone as an alarm clock!
The CardCase can comfortably hold 2 credit or ID cards, or 4-5 business cards, and works perfectly with either the AT&T or Verizon IPhone versions.
And the CardCase is now customizable! When ordering you can change the side text to anything you'd like up to 15 characters (company name, twitter username, real name etc.) you can also choose the text orientation and alignment.
Designed by Noesis Design Lab and manufactured by Shapeways, this durable nylon polyamide case has a unique look and grippy feel to help keep your IPhone (and cards) safe.
The case is shipped worldwide directly from Shapeways.
Available in a multitude of colors If you don't specify a color, the default is white
The CardCase for the IPhone 4 does what other card carrying IPhone cases can do and then some!
The sleek, patent pending, snap-on case not only protects your IPhone, but can also replaces your wallet or current business card holder and the integrated card slot on the side allows you to use any available card as an instant stand in portrait or landscape mode! Perfect for watching movies on the go, Facetime chatting, or using your IPhone as an alarm clock!
The CardCase can comfortably hold 2 credit or ID cards, or 4-5 business cards, and works perfectly with either the AT&T or Verizon IPhone versions.
And the CardCase is now customizable! When ordering you can change the side text to anything you'd like up to 15 characters (company name, twitter username, real name etc.) you can also choose the text orientation and alignment.
Designed by Noesis Design Lab and manufactured by Shapeways, this durable nylon polyamide case has a unique look and grippy feel to help keep your IPhone (and cards) safe.
The case is shipped worldwide directly from Shapeways.
Available in a multitude of colors If you don't specify a color, the default is white
by
mu3d93
This is a fun gadget that you can have you in house to show your friends how the sphere was printed inside the rail and you can never detach it!
by
GADesign
This beautiful pendant design has both inner and outer spirals, and together they represent the shape of a teardrop filled with DNA.
Premium Silver gives it more shine to make it even more beautiful !
This product has been successfully printed in all materials availible.
Premium Silver gives it more shine to make it even more beautiful !
This product has been successfully printed in all materials availible.
by
rinblad
A pendant in the shape of a tree, with some of the roots creating a garland around it. This unique pendant can stand on a surface or be hung in a necklace for any occasion. Currently on display in the 3DEA popup store at the Eventi hotel.
by
kevinweinewyork
A wide bangle made of solid sterling silver. Pointed flower motifs make up a three-dimensional lattice that wraps around a mysterious internal space. Appears delicate, but functions with uncanny strength. Also available from my shop: www.kevinwei.com
by
Kidmechano
ModiRaptor is the scourge of the ModiBot universe and 47 parts of poseable madness. Highly articulated tail and body. Vice-like jaws and 12 moving claws. Compatible with ModiBot hex-fit figures and accessories. What can you imagine and build with these parts? Here is a download link for an Instructions- https://www.dropbox.com/sh/s4vil011e6yh916/B6w8_cOWDB
by
MacBurro
A Little SteamPunk World Model for Desk Decoration
by
paulbaut
Pick a time period in stock history, visualize the performance of the chosen stocks with a stock line chart diagram and use those lines as lead for the bracelet design.
This anti-subjective design solution questions the continuous obsession of the "genius" designer, the "form" generator by using a public economic network as source of pure form generation.
More information @ http://www.paulkweton.com/latest-projects/Embrace/
by
berky93
A small mobius strip charm that can be used as a pendant or as a keychain.
A mobius strip is a very unique shape because it defies conventional logic. It is a 3-dimensional object with only two faces. A single twist makes them flow from the outside to the inside and back again. Simple and elegant.
A mobius strip is a very unique shape because it defies conventional logic. It is a 3-dimensional object with only two faces. A single twist makes them flow from the outside to the inside and back again. Simple and elegant.
by
peter@tenonedesign.com
Puzzle Case will set your iPhone apart from all the rest. Order this one-of-a-kind design with your choice of color for the top and bottom pieces.
This is the top piece. Be sure to also order at least one Puzzle Case Bottom piece.
http://www.shapeways.com/model/362223/puzzle_case_bottom.html
by
ceramicwombat
The Kaleidoscope Clock is a two-part model for constructing a clock face. This is Part A of the model, the main frame of the clock. Part B is the background, numbers, and hands of the clock and is available at http://www.shapeways.com/model/580493
Each of the two parts of the clock is available in any of the Strong & Flexible colors, allowing you to create a clock face in the colors you prefer.
You will also need a clock movement. The kit is designed to be used with a high-torque clock movement available at http://www.clockparts.com/clock-part/high-torque-movement-aa-cell/
Part A of the kit is ready to use out of the bag. Part B is sprued and will need to be clipped apart with nail clippers or utility blade. Use a gel super glue to assemble the model. Don't use regular super glue as the Strong & Flexible material is porous and will absorb the glue. The gel variety of super glue does not soak into the material. Assemble the clock as follows:
1. Apply a tiny dab of gel super glue to the flange around each number and insert in the appropriate place on the frame of the clock face.
2. Apply a tiny dab of gel super glue to each of the intersection grooves on the background piece, line it up with the frame, and squeeze together momentarily at each intersection point. Err on the side of less glue.
3. Push the shaft of the clock movement through the hole in the frame, add the rubber and brass washers (included with the clock movement), and add and tighten the brass hex nut (also included with the movement).
4. (Optional) Apply an acrylic spray clearcoat to the assembled face and hands.
5. Push the hour hand onto the protruding white post on the clock movement. You don't need glue to attach the hour hand. It's designed to be snug.
6. Push the minute hand onto the brass post at the end of the movement and thread the brass cap nut (included with the clock movement) onto the post.
If you have any questions about construction of the clock after you receive Part A, Part B, and the clock movement, please contact me at chuck@madebywombat.com
Each of the two parts of the clock is available in any of the Strong & Flexible colors, allowing you to create a clock face in the colors you prefer.
You will also need a clock movement. The kit is designed to be used with a high-torque clock movement available at http://www.clockparts.com/clock-part/high-torque-movement-aa-cell/
Part A of the kit is ready to use out of the bag. Part B is sprued and will need to be clipped apart with nail clippers or utility blade. Use a gel super glue to assemble the model. Don't use regular super glue as the Strong & Flexible material is porous and will absorb the glue. The gel variety of super glue does not soak into the material. Assemble the clock as follows:
1. Apply a tiny dab of gel super glue to the flange around each number and insert in the appropriate place on the frame of the clock face.
2. Apply a tiny dab of gel super glue to each of the intersection grooves on the background piece, line it up with the frame, and squeeze together momentarily at each intersection point. Err on the side of less glue.
3. Push the shaft of the clock movement through the hole in the frame, add the rubber and brass washers (included with the clock movement), and add and tighten the brass hex nut (also included with the movement).
4. (Optional) Apply an acrylic spray clearcoat to the assembled face and hands.
5. Push the hour hand onto the protruding white post on the clock movement. You don't need glue to attach the hour hand. It's designed to be snug.
6. Push the minute hand onto the brass post at the end of the movement and thread the brass cap nut (included with the clock movement) onto the post.
If you have any questions about construction of the clock after you receive Part A, Part B, and the clock movement, please contact me at chuck@madebywombat.com
by
sevensheaven
The legendary Apple Macintosh computer, executed as a 3D pixel art style pen / business card holder for your desk or cupboard, created exclusively by the Dutch Sevensheaven design studio. Of course, anything you like can be deposited in the tray, even a small plant. The back side is the same as the front side, with the nostalgic, iconic Mac features. A great gift for anyone who loves retro computing.
If you like Apple nostalgia, be sure to check out the 3D pixel art style busts of Apple founders Steve Jobs and Steve 'Woz' Wozniak, also available from the Sevensheaven 3D print store.
UPDATE: model updated with lighter color. The previous version was saved with a gamma-corrected color, which appeared lighter in the 3D editor than in reality.
by
robotgizmo
A nice little cube bot, lost in thought.
This little one is 1.75 inches tall. He's a cool dieselpunk robot... ready to roll. I will be adding many new robots and cool features in the weeks to come. Enjoy! robotharbinger@gmail.com www.robotgizmo.com
This little one is 1.75 inches tall. He's a cool dieselpunk robot... ready to roll. I will be adding many new robots and cool features in the weeks to come. Enjoy! robotharbinger@gmail.com www.robotgizmo.com
by
Whystler
A nice doorplate in Art Deco style for a posh office. This is customizable using the creator template below! Printed in SWF material, this white looks great on wooden or darkly painted doors. This material also takes acrylic paint nicely, and looks great in metallic colours especially when applied with a dry-brush technique over a darker base coat.
by
PlainOrb
3D Printed and Tested.
It's used to seal the idling USB ports on your electronic devices, protecting them from dust, coffee / water spill etc. The plug part seals the USB port.
Please note:
USB ports must have 10mm horizontal or 7.5mm vertical clearance, if you want to use multiple plugs.
Specification:
* Made of nylon-12 ( View Material Property )
* Made by Shapeways.
* Worldwide shipping. ( View Shipping Cost )
More Product Photos in the Wild !!
Go to my shop 7Plain
Twitter @7Plain
All Rights Reserved.
It's used to seal the idling USB ports on your electronic devices, protecting them from dust, coffee / water spill etc. The plug part seals the USB port.
Please note:
USB ports must have 10mm horizontal or 7.5mm vertical clearance, if you want to use multiple plugs.
Specification:
* Made of nylon-12 ( View Material Property )
* Made by Shapeways.
* Worldwide shipping. ( View Shipping Cost )
More Product Photos in the Wild !!
Go to my shop 7Plain
Twitter @7Plain
All Rights Reserved.
by
AyameDeude
Get all retro in the 90's with an 8-bit Gameboy Classic pendant!
Intended to be printed in full color sandstone, this Gameboy pendant stands out and shows just how classic a gamer you are.
Intended to be printed in full color sandstone, this Gameboy pendant stands out and shows just how classic a gamer you are.
by
sevensheaven
Mario also has his bad days. :) Now you can own this unique pop art piece of Mario eaten by a Piranha plant on your desk. After all, enjoying the jealousy of your friends and relatives for a long time to come is priceless.
by
unellenu
A wearable pinwheel design with a clip and a pendant fitting, measuring approximately 8.8cm across.
The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu
unellenu website unellenu.com
twitter: unellenu http://twitter.com/unellenu
facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813
youtube: unellenuhttp://www.youtube.com/unellenu1
#spiral_linear_pinwheel_318_is11sthB_30
The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu
unellenu website unellenu.com
twitter: unellenu http://twitter.com/unellenu
facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813
youtube: unellenuhttp://www.youtube.com/unellenu1
#spiral_linear_pinwheel_318_is11sthB_30
by
WillLaPuerta
It's a robot and he's depressed. I'm sure you've had days like this. He's based on a t-shirt design I made some time ago. (http://www.zazzle.com/depressed_robot_tshirt-235291318240133882?gl=willlapuerta&group=mens&lifestyle=classic&rf=238752122832938933)
by
byShapeways
This is the base model that we use for the Vibe iphone cases. It's freely downloadable to help you make your own iphone case designs.
by
cunicode
This is Jana, a teleported teddy.
She just got 3D-Scanned, poly-abused and texturized.
Jana | Skeleton
Real bears have bones inside, Teddy Bears have cotton, but Jana has polygon vertices.
Jana is 1.5in tall (38mm); perfect for sitting on your desk watching you surf the interwebs.
She is cool, just take some photos every now and then, and she'll be happy.
Jana loves music, loud and noisy if possible.
3D-Printed in full color, a very nice material with a sandstone finishing,
Get some of them, and they'll entertain themselves.
Jana Collection | Jana @cunicode +info & Photos
by
unellenu
3D fractal tree sculpture : a beautiful decorative object.
Display it as a sculpture or hang jewellery on the branches.
Height 19.3 cm ( 7.48 inches ). Also available in a smaller size
View a youtube video of this design, or view the embedded video below.
The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu
unellenu website unellenu.com
twitter: unellenu http://twitter.com/unellenu
facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813
youtube: unellenuhttp://www.youtube.com/unellenu1
#3Dtree-textured__01_10
Display it as a sculpture or hang jewellery on the branches.
Height 19.3 cm ( 7.48 inches ). Also available in a smaller size
View a youtube video of this design, or view the embedded video below.
The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu
unellenu website unellenu.com
twitter: unellenu http://twitter.com/unellenu
facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813
youtube: unellenuhttp://www.youtube.com/unellenu1
#3Dtree-textured__01_10
