by
fakebusker83
Version 2.0
A pair of posable hands for the Dark of the Moon Leader class Ironhide figure! Each finger is double-jointed, the wrists and thumbs are also ball-jointed, and the hands still fit behind the windscreen in his alt mode!
Not for casual collectors. You will need a dremel and some skill to install these hands.
I recommend these to be printed in Strong Flexible material for maximum reliability.
Radicon thread here. (With installation instructions)
Flickr gallery here.
A pair of posable hands for the Dark of the Moon Leader class Ironhide figure! Each finger is double-jointed, the wrists and thumbs are also ball-jointed, and the hands still fit behind the windscreen in his alt mode!
Not for casual collectors. You will need a dremel and some skill to install these hands.
I recommend these to be printed in Strong Flexible material for maximum reliability.
Radicon thread here. (With installation instructions)
Flickr gallery here.
by
fakebusker83
Version 1.5
A pair of posable hands for use with the ROTF leader Optimus Prime figure! The wrists, thumbs and all fingers are ball-jointed. Additionally, the back of each hand unfolds to form a deadly knuckle duster!
This design is recommended in Strong Flexible material.
TFW Radicon thread here.
Flickr gallery here.
A pair of posable hands for use with the ROTF leader Optimus Prime figure! The wrists, thumbs and all fingers are ball-jointed. Additionally, the back of each hand unfolds to form a deadly knuckle duster!
This design is recommended in Strong Flexible material.
TFW Radicon thread here.
Flickr gallery here.
by
Drawn-SteelHero
Detailed sniper assault rifle with flip-down bipod converts into a 56mm robot action figure with 9 points of articulation.
Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose). Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.
Supplied as a 18-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours .
Assembly and conversion instructions available HERE.
Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose). Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.
Supplied as a 18-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours .
Assembly and conversion instructions available HERE.
by
Drawn-SteelHero
Fearsome-looking machine gun converts into a 56mm robot action figure with 10 points of articulation.
Gun mode's handle is a 5mm diameter peg, making it compatible with many larger robot action figures.
Supplied as a 14-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions available at:
http://www.shapeways.com/forum/index.php?t=msg&goto=21214&#msg_21214
If you purchase Salvo, in any material, I'd love to see your results in the "It Arrived" forum!
Gun mode's handle is a 5mm diameter peg, making it compatible with many larger robot action figures.
Supplied as a 14-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions available at:
http://www.shapeways.com/forum/index.php?t=msg&goto=21214&#msg_21214
If you purchase Salvo, in any material, I'd love to see your results in the "It Arrived" forum!
by
exhalia
This 25mm skull base is perfect for your Warhammer, Warhammer 40K or other wargaming miniatures.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Engineers need tools, all the better if they are giant head sized wrenches and the repairs you're making are beating the enemy's brains in.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A hand marked by a halo. its designed primarily for the Angry Marines to bitchslap the empra's enemies. However its also a good banner topper or iron halo idea for those who want hand themed items. either way, enjoy.
