Product Name "CLaDOS Ring". Designed by QUATRO.
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)

If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.

Conversion chart for ring sizes:

US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm

I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)

A ring with crystals growing from it .

*Hole diameter 18,20mm* Size 8.


*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring

Ring based on Portal 2 Wheatley

SIZE 6

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12

Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!

Masked Silver Skull Ring

A highly detailed, heavy skull ring with a mechanical twist.
Looks great in both silver and stainless steel.

The rings band is only around 1.5 mm thick for wearing comfort.

You can personalize the size of this ring by clicking the "personalize" button on the right.
Then choose the diameter that fits you.

US Ring Size      Inside diameter
       8                         18.1 mm
       9                         19.0 mm
      10                        19.8 mm
      10 1/4                  20 mm
      11                        20.6 mm
      12                        21.4 mm

You can order any US ring size between 8 and 12. Please specify the size you want in the "Special instructions" field. I need both the US ring size and the inner ring diameter in millimeters. Please order larger sizes here.

Check out my other skull ring designs!

This is a ring I created based on the one worn by Hal Jordan of the Green Lantern Corps. This version has a smaller face for a subtle look and feel. Choose your size from the list below and it will be added to your cart. You can select your preferred material in the cart before checkout.

Size 3 Size 3.5 Size 4 Size 4.5 Size 5
Size 5.5 Size 6 Size 6.5 Size 7 Size 7.5
Size 8 Size 8.5 Size 9 Size 9.5 Size 10
Size 10.5 Size 11 Size 11.5 Size 12 Size 12.5
Size 13 Size 13.5 Size 14 Size 14.5 Size 15

With the Shapeways Print-on-Demand service, you can order this ring in any size, in any material, at any time. Please note that, with the exception of the Full Color Sandstone material, the color, look, and feel of the ring is defined by the material you choose, not the model image.

This ring will be produced and delivered through Shapeways and it’s partners.

For questions regarding your order, please contact Shapeways through their contact page at shapeways.com/contact.

For questions regarding the design of this, or any of my other rings and models, feel free to send me a private message. Also, if you have any ideas for new rings that you would like to see me design, please let me know.

Green Lantern, Hal Jordan, and all related marks are trademarks of Warner Bros. and DC Comics.

You don't have to catch 'em all, only the one you really care about.

Inspired by a touching proposal shared on the internet, this openable pokeball is just large enough to hold a ring or two. There is also an embossed line of text reading "I Choose You" inside of the lower half of the Pokeball.

Due to this model's recent success, I have decided to open up the available materials to the remaining Strong and Flexible colors as well as the metals.

Congratulations to all of the happy couples!

The Pokeball Ring Box sizes in at 4cm in diameter and opens in two pieces. Currently, this pokeball does not come pre-colored and will need to be painted or colored in some manner. This was decided due to sandstone (the only medium able to be pre-colored) may scratch and scuff anything inside of the Pokeball.

Ring based on Daft Punk Thomas Bangalter Helmet

US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

A new take on the engagement ring. The large diamond (8mm) is also made of steel. This ring was first designed as Ring - Diamonds, but during the test print it turned out that the resolution of the model was to high for the printer.

Contact me if you want a size outside of the co-creator range. I can also provide this ring on request in a plastic material for casting in silver or gold.

A pure design that makes this ring easy to wear and very comfortable. Perfect when combined with the armband of the necklace of the same collection. The SNAKE ring is available in different size. www.darioscapittadesign.com

Beautiful ring, great as a present for the one you love.
This one has inner diameter of 18 mm and is made of polished silver.

Create your own size, just click on "Personalize" and we will prepare the rest.

Model upload from SolidWorks

A dragon encased in a quartz crystal. I wanted to experiment with the transparent material and use the support material as a feature rather than something left over from the production process.

Green Lantern Ring 9.5

This is modelled with an inside diameter of 19.9mm which should shrink down to a US Size 9.5 during printing: Edit - a customer tells me this prints to 19mm dia. 
Note that the photographed ring is my finished, post-processed ring. You will receive a stainless steel print with no crystal; they are easily obtained over the Internet should you wish.

The quest to build this ring, was a long and tedious one. I had the idea of the shape. Like two hands gently embracing the central object. So I made that shape, bent it to the ring size, and it looked pretty good. I drew the stone and ran into hicup number 1. I didn't think about the stones height. So I go back to the original shape, and have to make the two hands thicker. I was debating on whether or not to thicken it all but decided to keep the band the original thickness. Next part was to design the prongs to hold in the stone. You can see them pretty well in shapeways render. I figured the one in the back could be substantual and be hidden, where the prongs in the front would be small and delicate. I originally wanted this to be printed engraved, but to get a scrib text to be visible, I'd have to make the text bigger, and it wouldn't have been attractive. Next road block I hit was the prongs, they had to be at the minimum wall thickness because details can be thinner but they have to be as thick as they are long. In the end I couldn't be happier with the way they came out. Overall I learned alot making this, and in the end there are a few more things I would do differently next time.

This ring is not available to the public, but I would be willing to design one for someone in the future. Just PM me or send me an email at youknowwho4eva@gmail.com see here for more details http://www.shapeways.com/forum/index.php?t=msg&th=6035&start=0&

Sleek modern designed Pawn Chess piece. Part of the "Kunst" chess set.

One in a chess themed set of six, the king key was created to depict extravagance, strength, and dominance. It can be used as a pendant, ornament, home decor, etc. (chain or cord not included at this time)

ninja chess set piece i designed. this was the pawn